Thanks for the feedback Rob. I doubt its lack of horsepower. I'll have to dig into this further.
_________________________________________________________________ Dave Jousma Manager Mainframe Engineering, Assistant Vice President david.jou...@53.com 1830 East Paris, Grand Rapids, MI 49546 MD RSCB2H p 616.653.8429 f 616.653.2717 -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Rob Scott Sent: Tuesday, November 21, 2017 11:07 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Useful little utility? **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** Dave, SDSF primary command syntax is a bit clunky as it has to support "the way it has always worked" and every parameter is positional rather than a more modern "keyword(value)" or "keyword=value" format. I have the ear of the current SDSF development team and perhaps they can provide something like a "ENQD dsname_pattern" command that would prime the major name with "SYSDSN", the SYSNAME with "*" and then filter the minor names by the specified pattern. Let me know if this sounds like something you would like. As for the response time of the "N" and "D" line commands, that very much sounds like something to do with your GRS configuration - perhaps raise a PMR with IBM to investigate if you believe that this is not a simple case of lack of CPU power? Rob Scott -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Jousma, David Sent: Tuesday, November 21, 2017 2:47 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Useful little utility? Rob, I've been playing with that too. ENQC is nice, shows plex-wide enq contention, ENQ not so much, kludgy IMO. By default ENQ is single system, and to enable all systems, you have to also specify major name. So ENQ SYSDSN * to get all systems in the plex. No way to pass any kind of filter on the major name, so you get (in my case, a list of 268K entries back) all data set names. Which you can then use a filter or find commands against, but why on earth no short cut? ENQC is easy enough that my operations staff can use it to see who is holding up a production batch job. However on occasion, they want to just "look up" a dataset to see if anyone is using it at that moment. I realize there are methods via ISPF 3.4, etc, or just issue the D GRS,RES=(SYSDSN,'DATA.SET.NAME') As for the "N", I've tried that too. I don’t know if something is wrong, but when I use that, it takes a good 15 seconds for the display to come back, and then its scope is only that single system. Once that list is produced, and you issue a "D" next to the dataset to display all enqueues, another 15 seconds, and even that display is single system. _________________________________________________________________ Dave Jousma Manager Mainframe Engineering, Assistant Vice President david.jou...@53.com 1830 East Paris, Grand Rapids, MI 49546 MD RSCB2H p 616.653.8429 f 616.653.2717 -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Rob Scott Sent: Tuesday, November 21, 2017 9:28 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Useful little utility? **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** Check out the new "ENQ" command in SDSF (2.1+) as it supports sysplex-wide ENQ information display. Note that you can also do an "N" action in the "NP" column on the DA panel to show enqueues for the ASID only. Rob Scott -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Jousma, David Sent: Tuesday, November 21, 2017 2:03 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Useful little utility? My wish for ISRDDN would be to be able to toggle on/off sysplex-wide ENQ data for STAR mode GRS configuration. ISRDDN ENQ pulls up a TASID-like panel, but there is no way to make it display global enqueues that I can see. All I get is a LIMITED ENQ DATA in the upper right corner, and extended help says: This system is running with SETGRS MODE=STAR. ENQ information will not be collected from other systems. As a result, ENQ displays may not reflect all of the ENQs which are known to GRS. _________________________________________________________________ Dave Jousma Manager Mainframe Engineering, Assistant Vice President david.jou...@53.com 1830 East Paris, Grand Rapids, MI 49546 MD RSCB2H p 616.653.8429 f 616.653.2717 -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Richards, Robert B. Sent: Tuesday, November 21, 2017 8:27 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Useful little utility? **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** John, I wonder how many of us missed that little improvement. I use ISRDDN enough times per day that I created a command table entry for it so that I only have to type DDN from anywhere. I just checked the new PARM command in SDSF. If you are using SYSNAME *, it will search for a member (masking acceptable) in every parmlib dataset listed. I did not see the capability to search for a string from that display, unless I missed it in my quick read of the tutorial . Still, that member search can be very powerful in its own right, especially in shops with tons of lpars. Bob -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John McKown Sent: Tuesday, November 21, 2017 7:30 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Useful little utility? On Tue, Nov 21, 2017 at 5:41 AM, Andrew Metcalfe < 00000149a256c9e8-dmarc-requ...@listserv.ua.edu> wrote: > DDLIST (ISRDDN) has this capability out of the box Just type PARMLIB > to add the logical parmlib concatenation to your display. > You can then issue O(nly) PARMLIB command followed by M(ember) xxxxxxx. > > Andrew > > Thanks. I knew about the LINKLIST command, but had never noticed the PARMLIB command. Oh, well, another one bites the dust. -- I have a theory that it's impossible to prove anything, but I can't prove it. Maranatha! <>< John McKown ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ================================ Rocket Software, Inc. and subsidiaries ■ 77 Fourth Avenue, Waltham MA 02451 ■ Main Office Toll Free Number: +1 877.328.2932 Contact Customer Support: https://my.rocketsoftware.com/RocketCommunity/RCEmailSupport Unsubscribe from Marketing Messages/Manage Your Subscription Preferences - http://www.rocketsoftware.com/manage-your-email-preferences Privacy Policy - http://www.rocketsoftware.com/company/legal/privacy-policy ================================ This communication and any attachments may contain confidential information of Rocket Software, Inc. All unauthorized use, disclosure or distribution is prohibited. If you are not the intended recipient, please notify Rocket Software immediately and destroy all copies of this communication. Thank you. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ================================ Rocket Software, Inc. and subsidiaries ■ 77 Fourth Avenue, Waltham MA 02451 ■ Main Office Toll Free Number: +1 877.328.2932 Contact Customer Support: https://my.rocketsoftware.com/RocketCommunity/RCEmailSupport Unsubscribe from Marketing Messages/Manage Your Subscription Preferences - http://www.rocketsoftware.com/manage-your-email-preferences Privacy Policy - http://www.rocketsoftware.com/company/legal/privacy-policy ================================ This communication and any attachments may contain confidential information of Rocket Software, Inc. All unauthorized use, disclosure or distribution is prohibited. If you are not the intended recipient, please notify Rocket Software immediately and destroy all copies of this communication. Thank you. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
