Roger,

The error occurs consistently on three different machines at three clients.
Unlikely to be LLA.

FYI. One abend had failure to load from *VLF*. I stopped LLA and received
the same S106.

Also all libraries are in STEPLIB.

Wayne



On Sat, Jan 12, 2019 at 4:53 PM Mike Schwab <mike.a.sch...@gmail.com> wrote:

> http://www.jaymoseley.com/hercules/sabends.htm
>
> S106 - 0C - NOT ENOUGH STORAGE WAS AVAILABLE FOR FETCH TO DO A GETMAIN
>             FOR THE MODULE OR CONTROL BLOCKS.  CHECK REGISTER 0:
>             04 - NO STORAGE FOR DATD.
>             08 - NO STORAGE FOR DEB.
>             0C - NO STORAGE FOR IOSB.
>             10 - NO STORAGE FOR EXLIST.
>             14 - NO STORAGE FOR MODULE.
>             18 - UNABLE TO FIX STORAGE.
>
> But Register 0 has an address in it.
>
> On Fri, Jan 11, 2019 at 9:53 PM Wayne Bickerdike <wayn...@gmail.com>
> wrote:
> >
> > REGION=0M  and same abend with REGION=512M.
> >
> > Took an SVC dump, here's some FA information.
> >
> > JOBNAME: $SDO512M  SYSTEM ABEND: 106            S0W1      2019/01/11
> > 21:21:48
> >
> >
> > IBM Fault Analyzer Abend Job Information:
> >
> >   Abend Date. . . . . . . . : 2019/01/11
> >   Abend Time. . . . . . . . : 21:21:48
> >   System Name . . . . . . . : S0W1
> >   Job Type. . . . . . . . . : Batch
> >   Job ID. . . . . . . . . . : JOB02430
> >   Job Name. . . . . . . . . : $SDO512M
> >   Job Step Name . . . . . . : n/a
> >   ASID. . . . . . . . . . . : 1C
> >   Abend TCB Address . . . . : 007FE990
> >   Job Execution Class . . . : A
> >   Region Size . . . . . . . : 0M
> >   EXEC Program Name . . . . : DFHEISUP
> >   User ID . . . . . . . . . : BDB204
> >   Accounting Information. . : n/a
> >
> > Execution Environment:
> >
> >   Operating System. . . . . : z/OS V2R2M0
> >   Data Facility Product . . : DFSMS z/OS V2R2M0
> >   CPU Model . . . . . . . . : 2817
> >
> > NOTE: The execution environment for this event is no longer valid, save
> > areas
> >       and data might have subsequently been updated.  This is normally
> > caused
> >       by condition handling routine processing.
> >
> >
> >
> > Load Module Name. . . . . . : DFHEISUP
> >
> >   At Address. . . . . . . . : 00007F90
> >
> >   Load Module Length. . . . : X'7B6070'
> >
> >
> >
> > Machine Instruction . . . . : 0A08          SVC     8 (LOAD)
> >
> >   At Address. . . . . . . . : 007BDD70 (Module DFHEISUP offset X'7B5DE0')
> >
> >   AMODE . . . . . . . . . . : 31
> >
> >
> >
> > Additional instructions around event offset:
> >
> >
> >
> >   Offset   Hex            Instruction
> >
> >        -2C 58C0 0010      L       R12,16
> >
> >        -28 58C0 C000      L       R12,0(,R12)
> >
> >        -24 58C0 C004      L       R12,4(,R12)
> >
> >        -20 58C0 C144      L       R12,324(,R12)
> >
> >        -1C 58C0 C004      L       R12,4(,R12)
> >
> >        -18 BFCF C020      ICM     R12,15,32(R12)
> >
> >        -14 A784 0005      BRC     8,*+10
> >
> >        -10 180C           LR      R0,R12
> >
> >         -E A7F4 007D      BRC     15,*+250
> >
> >         -A 4120 7008      LA      R2,8(,R7)
> >
> >         -6 4100 2000      LA      R0,0(,R2)
> >
> >         -2 1B11           SR      R1,R1
> >
> >   007BDD70 0A08           SVC     8        (LOAD)
> >
> >         +2 58C0 322C      L       R12,556(,R3)
> >
> >         +6 166C           OR      R6,R12
> >
> >         +8 164C           OR      R4,R12
> >
> >         +A A7F4 0071      BRC     15,*+226
> >
> >  JOBNAME: $SDO512M  SYSTEM ABEND: 106            S0W1      2019/01/11
> > 21:21:48
> >          +2 58C0 322C      L       R12,556(,R3)
> >
> >          +6 166C           OR      R6,R12
> >
> >          +8 164C           OR      R4,R12
> >
> >          +A A7F4 0071      BRC     15,*+226
> >
> >          +E A7F8 0010      LHI     R15,16
> >
> >         +12 5820 7018      L       R2,24(,R7)
> >
> >         +16 1812           LR      R1,R2
> >
> >
> >
> >  Program Status Word (PSW) . : 078D0000 807BDD72
> >
> >  PSW Summary . . . . . . . . : Primary Space Mode, PSW Key 8, AMODE 31,
> > Problem
> >                                State
> >
> >
> >
> >  General Purpose Registers (AMODE: 64 31 24 , Bytes: Dec Hex ):
> >
> >    R0:  007BDA48 (Module DFHEISUP + X'7B5AB8')
> >
> >    R1:  00000000 (2,048 bytes of storage addressable)
> >
> >    R2:  007BDA48 (Module DFHEISUP + X'7B5AB8')
> >
> >    R3:  007BDC78 (Module DFHEISUP + X'7B5CE8')
> >
> >    R4:  00000064 (1,948 bytes of storage addressable)
> >
> >    R5:  00006FE8 (8,093,720 bytes of storage addressable)
> >
> >    R6:  007BD800 (Module DFHEISUP + X'7B5870')
> >
> >    R7:  807BDA40 (Module DFHEISUP + X'7B5AB0')
> >
> >    R8:  007AED20 (Module DFHEISUP + X'7A6D90')
> >
> >    R9:  007F8190 (32,368 bytes of storage addressable)
> >
> >    R10: 00000000 (2,048 bytes of storage addressable)
> >
> >    R11: 807BD82A (Module DFHEISUP + X'7B589A')
> >
> >    R12: 00000000 (2,048 bytes of storage addressable)
> >
> >    R13: 00006F50 (8,093,872 bytes of storage addressable)
> >
> >    R14: 807BD8FE (Module DFHEISUP + X'7B596E')
> >
> >    R15: 007BDC78 (Module DFHEISUP + X'7B5CE8')
> >
> >  Abend Code. . . . . . . . . : S106-X'C'
> >
> >  Machine Instruction . . . . : 0A0D          SVC     13 (ABEND)
> >    At Address. . . . . . . . : 01074DB8
> >    AMODE . . . . . . . . . . : 31
> >
> >  Instructions around point of failure:
> >
> >    Offset   Hex            Instruction
> >         -22 43C0 5078      IC      R12,120(,R5)
> >         -1E 185C           LR      R5,R12
> >         -1C 8950 0008      SLL     R5,8
> >         -18 16F5           OR      R15,R5
> >         -16 1824           LR      R2,R4
> >         -14 1837           LR      R3,R7
> >         -12 184B           LR      R4,R11
> >         -10 18E1           LR      R14,R1
> >          -E 89E0 000C      SLL     R14,12
> >          -A 54E0 9038      N       R14,56(,R9)
> >          -6 A5EA 8400      OILH    R14,X'8400'
> >          -2 181E           LR      R1,R14
> >    01074DB8 0A0D           SVC     13        (ABEND)
> >          +2 18FB           LR      R15,R11
> >          +4 180C           LR      R0,R12
> >          +6 181D           LR      R1,R13
> >          +8 58E0 02FC      L       R14,764
> >         +C 58D0 E248      L       R13,584(,R14)
> >        +10 0DED           BASR    R14,R13
> >        +12 18BF           LR      R11,R15
> >
> > Program Status Word (PSW) . : 070C1000 81074DBA
> > PSW Summary . . . . . . . . : Primary Space Mode, PSW Key 0, AMODE 31,
> >                               Supervisor State
> >
> > General Purpose Registers (AMODE: 64 31 24 , Bytes: Dec Hex ):
> >   R0:  0_00001F00 (Storage invalid)
> >   R1:  0_84106000 (Module IGC0013{ + X'9E000')
> >   R2:  0_26080021 (Storage invalid)
> >   R3:  0_0000000C (2,036 bytes of storage addressable)
> >   R4:  0_00000014 (2,028 bytes of storage addressable)
> >   R5:  0_007FF8F0 (1,808 bytes of storage addressable)
> >   R6:  0_7F5F7100 (1,089,280 bytes of storage addressable)
> >   R7:  0_0000000C (2,036 bytes of storage addressable)
> >   R8:  0_7F5F7168 (1,089,176 bytes of storage addressable)
> >   R9:  0_010752E0 (7,456 bytes of storage addressable)
> >   R10: 0_00000024 (2,012 bytes of storage addressable)
> >   R11: 0_00000014 (2,028 bytes of storage addressable)
> >   R12: 0_00000000 (2,048 bytes of storage addressable)
> >   R13: 0_7F5F7168 (1,089,176 bytes of storage addressable)
> >   R14: 0_84106000 (Module IGC0013{ + X'9E000')
> >   R15: 0_0000000C (2,036 bytes of storage addressable)
> >
> >  Load Module Name. . . . . . : IGC0101C (In Link Pack Area)
> >
> >    At Address. . . . . . . . : 0417D000
> >
> >    Load Module Length. . . . : X'1D6F0'
> >
> >
> >
> >  Machine Instruction . . . . : n/a
> >
> >    At Address. . . . . . . . : 0418FDF0 (Module IGC0101C offset X'12DF0')
> >
> >    AMODE . . . . . . . . . . : 31
> >
> >
> >
> >  Additional instructions around event offset:
> >
> >
> >
> >    Offset   Hex            Instruction
> >
> >    No instructions available.
> >
> >
> >
> >
> >
> >  Program Status Word (PSW) . : 070C1000 8418FDF2
> >
> >  PSW Summary . . . . . . . . : Primary Space Mode, PSW Key 0, AMODE 31,
> >
> >                                Supervisor State
> >
> >
> >
> >  General Purpose Registers (AMODE: 64 31 24 , Bytes: Dec Hex ):
> >
> >    R0:  0032D125 (Module DFHEISUP + X'325195')
> >
> >    R1:  7F5F7DF0 (1,085,968 bytes of storage addressable)
> >
> >    R2:  0418FE08 (Module IGC0101C + X'12E08' - storage invalid)
> >
> >    R3:  00000000 (2,048 bytes of storage addressable)
> >
> >    R4:  007C5F68 (237,720 bytes of storage addressable)
> >
> >    R5:  7F5F7428 (1,088,472 bytes of storage addressable)
> >
> >    R6:  04192530 (Module IGC0101C + X'15530' - storage invalid)
> >
> >   R7:  7F5F7CF0 (1,086,224 bytes of storage addressable)
> >   R8:  7F5F7438 (1,088,456 bytes of storage addressable)
> >   R9:  007FC2E4 (15,644 bytes of storage addressable)
> >   R10: 007FC258 (15,784 bytes of storage addressable)
> >   R11: 00000000 (2,048 bytes of storage addressable)
> >   R12: 7F5F7078 (1,089,416 bytes of storage addressable)
> >   R13: 7F5F7078 (1,089,416 bytes of storage addressable)
> >   R14: 8418FDE0 (Module IGC0101C + X'12DE0' - storage invalid)
> >   R15: 00000000 (2,048 bytes of storage addressable)
> >
> >
> >
> >
> > On Thu, Jan 10, 2019 at 5:56 AM Mike Schwab <mike.a.sch...@gmail.com>
> wrote:
> >
> > > Fetch usually fails with INSUFFICIENT MEMORY.  Increase region size.
> > > If you don't have one, look at the memory stats at the end of step
> > > messages to see what was used and double. Otherwise suggest REGION=4M,
> > > 5M, 6M, 7M, 20M, 32M, 64M, etc.
> > >
> > > On Wed, Jan 9, 2019 at 12:26 PM Peter Relson <rel...@us.ibm.com>
> wrote:
> > > >
> > > > I don't think the abend 106 that is discussed is part of the original
> > > > discussion, so I guessed that it could do with a different thread
> name.
> > > >
> > > > The abend 106 itself is not helpful in finding out what is going on
> > > > because that is just the generic result of a preceding problem which
> > > > likely had message(s) and/or abend(s).
> > > >
> > > > It appears that what Wayne posted was truncated.
> > > >
> > > > IEW4000I FETCH FOR MODULE CEEBINIT FROM DDNAME *VLF*    FAILED
> BECAUSE
> > > > INSUFFICI
> > > > CSV031I LIBRARY ACCESS FAILED FOR MODULE CEEBINIT, RETURN CODE 24,
> REASON
> > > > CODE 2
> > > >
> > > > Can we get the complete information? It probably doesn't matter
> much. The
> > > > missing part of IEW4000I is not going to help, but possibly having
> the
> > > > rest of CSV031I (including the complete reason code) would.
> > > >
> > > > In at least one case, Fetch processing did a getmain, and the getmain
> > > > failed.  Why? Because the application needed more region than was
> > > defined,
> > > > probably.
> > > > I'd suggest capturing a dump on the IEW4000I message issued by
> nucleus
> > > > module CSVLLTCH. That's what IBM service will likely ask for.
> > > >
> > > > The message can also occur because of a problem with doing the
> relocation
> > > > processing (I'm not sure why that lands with a message about
> insufficient
> > > > storage).
> > > >
> > > > Peter Relson
> > > > z/OS Core Technology Design
> > > >
> > > >
> > > >
> ----------------------------------------------------------------------
> > > > For IBM-MAIN subscribe / signoff / archive access instructions,
> > > > send email to lists...@listserv.ua.edu with the message: INFO
> IBM-MAIN
> > >
> > >
> > >
> > > --
> > > Mike A Schwab, Springfield IL USA
> > > Where do Forest Rangers go to get away from it all?
> > >
> > > ----------------------------------------------------------------------
> > > For IBM-MAIN subscribe / signoff / archive access instructions,
> > > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
> > >
> >
> >
> > --
> > Wayne V. Bickerdike
> >
> > ----------------------------------------------------------------------
> > For IBM-MAIN subscribe / signoff / archive access instructions,
> > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>
>
>
> --
> Mike A Schwab, Springfield IL USA
> Where do Forest Rangers go to get away from it all?
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
>


-- 
Wayne V. Bickerdike

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Reply via email to