On Mon, 13 Jan 2020 07:47:58 -0600, Barbara Nitz <nitz-...@gmx.net> wrote:
>I am attempting to install zSecure. I get > >GIM58901E ** APPLY PROCESSING FAILED FOR SYSMOD HCKR240. SYSMOD HCKR240 WOULD > HAVE CAUSED A CHANGE TO THE MVST ZONE THAT CAN NOT BE PROCESSED > COMPLETELY BY PRIOR LEVELS OF SMP/E. USE THE UPGRADE COMMAND TO > ALLOW SMP/E TO MAKE SUCH CHANGES. > >I read about the upgrade command and still don't know if I can safely use it. >My SMPE is at 36.105, >presumably to get upgraded by the latest refresh which is installed but not >yet activated (I wanted >to do that together with z/Secure). > >So if I run the UPGRADE command on my target (and probably later on my DLIB >zone), can I then still >use my current level of SMPE on those zones? There won't be any level lower >than 36.105. As I understand it, UPGRADE will set UPGLEVEL on your target to the level of SMP/E that you are currently running, 36.105, so it seems it shouldn't hurt you. If it was me, I might use ZONECOPY to create a copy of the target zone and run UPGRADE against that, then look at the TZONE entry for the new zone. I'd be curious what the UPGLEVEL is in the TZONE entry for your target zone. For a real answer, I suppose we'll need to hear from Kurt. -- Tom Marchant ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
