I think I found it. You have to do a "GROUP" command, etc. At least that's what
I'm trying at the moment.
| Kris Buelens <[EMAIL PROTECTED]>
Sent by: The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> 05/28/2006 09:34 AM
|
To: IBMVM@LISTSERV.UARK.EDU cc: Subject: Re: VM 5.2 GCS problem (I think) |
The "standard" list of authorized users is in the GCS config file, which
is assembled in the nucleus. Sureky RSCS and VTAM are listed there.
Kris,
IBM Belgium, VM customer support
"Roland P. Chung" <[EMAIL PROTECTED]>
Sent by: The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU>
2006-05-28 16:32
Please respond to
The IBM z/VM Operating System
To
IBMVM@LISTSERV.UARK.EDU
cc
Subject
Re: VM 5.2 GCS problem (I think)
Hi Stve, I GOOGLEd the message and found this:
Date: Mon, 24 Sep 2001 18:01:26 -0400
Reply-To: VM/ESA Discussions <[log in to unmask]>
Sender: VM/ESA Discussions <[log in to unmask]>
From: "Ferguson, Neale" <[log in to unmask]>
Subject: Re: VTAM or GCS Abend on VM/ESA V2R4?
Content-Type: text/plain; charset="iso-8859-1"
Isn't this a privileged operation exception. This means the
virtual
machine needs to be setup as a privileged member of the GCS
group
(pardon the terminology).
> -----Original Message-----
> I created directory entries for VTAM83 and RSCS83 as
> duplicates of VTAM and
> RSCS in the 2nd-level system. However, VTAM abends with
the following
> message when I XAUTOLOG VTAM83.
>
> GCTABD230E Command 'EXEC' failed - System abend 0C2-0000
>
> I can't find this message in the System Messages and
Codes for V2R2 or
> V2R4, nor in the GCS manual for V2R2 (I don't have a GCS
> manual for V2R4).
@
http://listserv.uark.edu/scripts/wa.exe?A2=ind0109&L=ibmvm&T=0&P=38056
It is old, but may shad some light.
Another one:
Date: Wed, 21 Sep 2005 14:01:08 -0400
Reply-To: VM/ESA and z/VM Discussions <[log in to
unmask]>
Sender: VM/ESA and z/VM Discussions <[log in to
unmask]>
From: "Horlick, Michael" <[log in to unmask]>
Subject: Re: SNAPRSIM - Need help
Content-Type: multipart/alternative;
Thank you, Peter.
BTW Thanks to all who responded. I issued the CONFIG
AUTHUSER ADD SNAFU
and it came up fine.
Funny thing is that I have several userid's (RSCS , VTAM,
TPX) IPLing
GCS but nothing in my PROFILE GCS on userid's GCS 191 disk.
Mike
@
http://listserv.uark.edu/scripts/wa.exe?A2=ind0509&L=ibmvm&T=0&P=39791
I hope this helps.
...Roland
--- Steve Gentry <[EMAIL PROTECTED]>
wrote:
> Hello. I'm getting the following messages
>
> PDLLIP01: 233 *-* 'APRMTSK'
> PDLLIP01: >>> "APRMTSK"
> PDLLIP01: GCTABD230E Command 'EXEC' failed - System
> abend 0C2-0000
> PDLLIP01: Ready;
>
> We RSCS and have printers attached via ethernet to our
> system
>
> Can anyone tell me where I can find some info on the
> abend code?
> I use HELP on VM for GCTABD230E and it says to "Refer
> to the GCS Abend
> table in this publication . ."
> What pub? There isn't one listed on the HELP screen.
> Thanks,
> Steve G.
With best regards,
...Roland Chung
Senior Technical Specialist (S/390,VM/VSE,DB2/VSE&VM)
MAXC Consultants Inc.
Voice/Fax: 416-469-3280 (If busy, call: 416-469-2268)
197 Hastings Ave., Toronto, Ontario, Canada. M4L 2L6
** Life is short. Stop once in a while and smell the roses. **
