>>I'm using DFSMSRM mount commands from my VM user id. I only have 1 library >>with multiple drive types. 1 Frame has a 3490 C2A drive, the other frame >>as 3 - 3590 drives.
>Hmm, okay, well the problem here is you have one library with two >different drive types and specific volumes for each. When you request >a volume to be mounted, RMS does not know the difference in drives >when they are all in one library. Perhaps you previously had an exit >that differentiated the volumes and drives to help out RMS? Now you have me questioning myself. I know there is no exit, I would have had to write it. When I get back from the Expo I'm going to start up my old z/VM 5.1 and verify it that it works like I "think" it did. I used it infrequently for mounting from VM, it's real purpose in life is connected to z/OS. But I was _sure_ it mounted the volume I asked for on the correct drive type. Hmmmmm. Thanks for the replies Les. Mark D Pace Senior Systems Engineer Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317 Office: 850.219.5184 Fax: 888.221.9862 http://www.mainline.com This e-mail and files transmitted with it are confidential, and are intended solely for the use of the individual or entity to whom this e-mail is addressed. If you are not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you are not one of the named recipient(s) or otherwise have reason to believe that you received this message in error, please immediately notify sender by e-mail, and destroy the original message. Thank You.
