Hi, David,
There is no in use area except spool area:
DASD A557 52LSPL 3390 CKD-ECKD (UNITS IN CYLINDERS)
TDISK TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
PAGE TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
SPOOL TOTAL=00000003338 INUSE=00000000308 AVAIL=00000003030
DRCT TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
cp drain dasd a557 spool
Command complete
Ready; T=0.01/0.01 10:50:04
q a557
DASD A557 CP OWNED 52LSPL 0
Ready; T=0.01/0.01 10:52:49
cp det a557 system
HCPDTS143E DASD A557 in use by system
Ready(00143); T=0.01/0.01 10:53:00
But I still can not detach from system......
Thanks for your help,
Ann
"David Kreuter" <[EMAIL PROTECTED]>
Sent by: "The IBM z/VM Operating System" <IBMVM@LISTSERV.UARK.EDU>
03/12/2007 10:38 AM
Please respond to
"The IBM z/VM Operating System" <IBMVM@LISTSERV.UARK.EDU>
To
IBMVM@LISTSERV.UARK.EDU
cc
Subject
Re: detach spool pack from system
Hi Ann: You can try draining it with the CP DRAIN. DASD command, but first
check if there are any CP areas on the pack, do a QUERY ALLOC. IF there
are any in use areas, you will have to get it off the volume. If it's
being used for spool you will likely need to back up all your spool.
You should definitely have 2nd level volumes start on real cylinder 1 or
beyond. Leave real cylinder 0 to 1st level CP.
Hope this helps,
David
-----Original Message-----
From: The IBM z/VM Operating System on behalf of [EMAIL PROTECTED]
Sent: Mon 3/12/2007 10:33 AM
To: IBMVM@LISTSERV.UARK.EDU
Subject: [IBMVM] detach spool pack from system
I have a second level spool pack attached on the first level system,
it's defined as CP owned pack in the system config on first level.
Is there way to detach it dynamically from system without updating config
or ipl ?
q a557
DASD A557 CP OWNED 52LSPL 0
Ready;
cp det a557 system
HCPDTS143E DASD A557 in use by system
Ready(00143);
Thanks,
Ann
The information contained in this message may be CONFIDENTIAL and is for
the intended addressee only. Any unauthorized use, dissemination of the
information, or copying of this message is prohibited. If you are not the
intended addressee, please notify the sender immediately and delete this
message.
The information contained in this message may be CONFIDENTIAL and is for the
intended addressee only. Any unauthorized use, dissemination of the
information, or copying of this message is prohibited. If you are not the
intended addressee, please notify the sender immediately and delete this
message.
