Did you put the new logo file in the logo config file as defined in the system config file record (Logo_Config LOGO-C CONFIG)? You did QUERY CPDISK to ensure the PARM disk is accessed? Run DRAWLOGO on 1st level just to make sure you have the correct file? And it does not exceed 78x16? You can dynamically test by issuing these commands per my notes: To reset the system logo you need to do the following: A. Insure that the LOGO files are on the CP PARM disk. B. Insure that the CONFIG file pointing to the LOGO files is on the CP PARM disk. C. Issue the following two commands: REFRESH LOGOinfo LOGO-C CONFIG REFRESH LOGOVSM VMVTAM* Note: LOGO-C CONFIG is on the CP PARM disk. VMVTAM* is pattern matching for the VTAM machines. Jim
-----Original Message----- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Friday, June 22, 2007 11:33 AM To: IBMVM@LISTSERV.UARK.EDU Subject: VM logo Hi, listers, I created a new logo, tested it on the 2nd level and the new logo came up. So, Ipled the first level VM, but the new logo does not come up, the file Local logo on CF1 has new logo. CPLOAD is on CF1, CPLOAD was accessed, but not local logo. It looks like came up with minimum logo. What am I missing here ? Thanks, Ann Chang (212) 578 - 8297(O) (212) 578 - 9877(Fax) The information contained in this message may be CONFIDENTIAL and is for the intended addressee only. Any unauthorized use, dissemination of the information, or copying of this message is prohibited. If you are not the intended addressee, please notify the sender immediately and delete this message. -------------------------------------------------------- This message w/attachments (message) may be privileged, confidential or proprietary, and if you are not an intended recipient, please notify the sender, do not use or share it and delete it. Unless specifically indicated, this message is not an offer to sell or a solicitation of any investment products or other financial product or service, an official confirmation of any transaction, or an official statement of Merrill Lynch. Subject to applicable law, Merrill Lynch may monitor, review and retain e-communications (EC) traveling through its networks/systems. The laws of the country of each sender/recipient may impact the handling of EC, and EC may be archived, supervised and produced in countries other than the country in which you are located. This message cannot be guaranteed to be secure or error-free. This message is subject to terms available at the following link: http://www.ml.com/e-communications_terms/. By messaging with Merrill Lynch you consent to the foregoing. --------------------------------------------------------