Kevin, Edward,
Would not -
CU0130 CNTLUNIT CUNUMBR=0130,PATH=(30,31,40,41),CUADD=01,
X
UNITADD=((00,256)),UNIT=2105
DV800 IODEVICE ADDRESS=(0800,256),CUNUMBR=(0130),
X
UNIT=3390
give you the same results??
HITACHI
DATA SYSTEMS
Raymond E. Noal
Senior Technical Engineer
Office: (408) 970 - 7978
________________________________
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Edward M. Martin
Sent: Thursday, December 06, 2007 2:05 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: REquest for IOCP for DS6800 FICON Z890
Hello Kevin,
Thanks that is what I was looking for.
I have this right now.
*
CU0130 CNTLUNIT CUNUMBR=0130,PATH=(30),CUADD=01, X
UNITADD=((00,256)),UNIT=2105
CU0140 CNTLUNIT CUNUMBR=0140,PATH=(40),CUADD=01, X
UNITADD=((00,256)),UNIT=2105
CU0131 CNTLUNIT CUNUMBR=0131,PATH=(31),CUADD=01, X
UNITADD=((00,256)),UNIT=2105
CU0141 CNTLUNIT CUNUMBR=0141,PATH=(41),CUADD=01, X
UNITADD=((00,256)),UNIT=2105
CU0230 CNTLUNIT CUNUMBR=0230,PATH=(30),CUADD=02, X
UNITADD=((00,256)),UNIT=2105
CU0240 CNTLUNIT CUNUMBR=0240,PATH=(40),CUADD=02, X
UNITADD=((00,256)),UNIT=2105
CU0231 CNTLUNIT CUNUMBR=0231,PATH=(31),CUADD=02, X
UNITADD=((00,256)),UNIT=2105
CU0241 CNTLUNIT CUNUMBR=0241,PATH=(41),CUADD=02, X
UNITADD=((00,256)),UNIT=2105
DV800 IODEVICE ADDRESS=(0800,256),CUNUMBR=(0130,0140,0141,0131), X
UNIT=3390
DV900 IODEVICE ADDRESS=(0900,256),CUNUMBR=(0241,0231,0230,0240), X
UNIT=3390
*
Ed Martin
330-588-4723
ext 40441
________________________________
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Neubert, Kevin (DIS)
Sent: Thursday, December 06, 2007 4:39 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: REquest for IOCP for DS6800 FICON Z890
You definitely want and should take advantage of all four channels.
Your CHPIDs look okay to me, but consider something like the following
for your CNTLUNITs and IODEVICEs
CU130 CNTLUNIT CUNUMBR=130,PATH=(30), X
UNITADD=((00,256)),CUADD=0,UNIT=2105
CU140 CNTLUNIT CUNUMBR=140,PATH=(40), X
UNITADD=((00,256)),CUADD=0,UNIT=2105
CU131 CNTLUNIT CUNUMBR=131,PATH=(31), X
UNITADD=((00,256)),CUADD=0,UNIT=2105
CU141 CNTLUNIT CUNUMBR=141,PATH=(41), X
UNITADD=((00,256)),CUADD=0,UNIT=2105
CUA30 CNTLUNIT CUNUMBR=130,PATH=(30), X
UNITADD=((00,256)),CUADD=1,UNIT=2105
CUA40 CNTLUNIT CUNUMBR=140,PATH=(40), X
UNITADD=((00,256)),CUADD=1,UNIT=2105
CUA31 CNTLUNIT CUNUMBR=131,PATH=(31), X
UNITADD=((00,256)),CUADD=1,UNIT=2105
CUA41 CNTLUNIT CUNUMBR=141,PATH=(41), X
UNITADD=((00,256)),CUADD=1,UNIT=2105
DV800 IODEVICE ADDRESS=(0800,256),CUNUMBR=(130,140,131,141), X
UNIT=3390,UNITADD=00
DV900 IODEVICE ADDRESS=(0900,256),CUNUMBR=(A30,A40,A31,A41), X
UNIT=3390,UNITADD=00
Regards,
Kevin
________________________________
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Edward M. Martin
Sent: Thursday, December 06, 2007 12:19 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: REquest for IOCP for DS6800 FICON Z890
Hello Everyone,
I am just getting the IOCP ready for a ds6800 connected to four
ports on the Z890.
I would like to some help with the IOCP.
Even though we have to have LPAR, there is only one called
PROD.
The FICON cards are the 2320 FICON Express SX. Two 1 gig ports
per card.
I would like to have all four ports able to access all dasd.
I am figuring to have the DS6800 formated for 30 3390 mod 3, 306 3390
mod 9, and 30 3390 mod 27. (366 devices)
I know that am missing some RESOURCE PARTITION and various CSS
commands.
I am reading about them now. And I still have lots of
questions.
I would appreciate any insight and idea's. Than
CHPID PCHID=130,PATH=30,TYPE=FC,SHARED .FICON DS6800
CHPID PCHID=131,PATH=31,TYPE=FC,SHARED .FICON DS6800
CHPID PCHID=140,PATH=40,TYPE=FC,SHARED .FICON DS6800
CHPID PCHID=141,PATH=41,TYPE=FC,SHARED .FICON DS6800
*********************************************************
* chpids 130/131/140/141 paths 30/31/40/41 *
* IBM ds6400 system *
*********************************************************
*
CU130 CNTLUNIT CUNUMBR=130,PATH=(30,40), X
UNITADD=((00,256)),UNIT=2105
CU140 CNTLUNIT CUNUMBR=140,PATH=(31,41), X
UNITADD=((00,256)),UNIT=2105
DV800 IODEVICE ADDRESS=(0800,256),CUNUMBR=(130,140), X
UNIT=3390,UNITADD=00
DV900 IODEVICE ADDRESS=(0900,256),CUNUMBR=(140,130), X
UNIT=3390,UNITADD=00
*
Ed Martin
330-588-4723
ext 40441
