We are running z/VM 5.2 service level 0602.
 
I have issued the following commands:
 
DEFINE VSWITCH SWITCH1 RDEV 203 CONNECT
 
SET VSWITCH SWITCH1 GRANT SUSESP2
 
In the SUSESP2 directory entry, I have the following:
 
NICDEF 340 TYPE QDIO DEV 3 LAN SYSTEM SWITCH1 
 
When I bring up the SUSESP2 machine, I see the message that device 340
has been defined.
 
The SUSESP2 machine comes up normally.
 
Here is the output from the Q VSWITCH DET command:
 
 
q vswitch det

VSWITCH SYSTEM SWITCH1  Type: VSWITCH Connected: 1    Maxconn: INFINITE

  PERSISTENT  RESTRICTED    NONROUTER                 Accounting: OFF

  VLAN Unaware

  State: Ready

  IPTimeout: 5         QueueStorage: 8

  Portname: UNASSIGNED RDEV: 0203 Controller: DTCVSW2  VDEV:  0203

    VSWITCH Connection:

      RX Packets: 205        Discarded: 293        Errors: 0

      TX Packets: 0          Discarded: 0          Errors: 0

      RX Bytes: 106924               TX Bytes: 0

      Device: 0203  Unit: 000   Role: DATA

    Adapter Owner: SUSESP2  NIC: 0340  Name: UNASSIGNED

      RX Packets: 205        Discarded: 0          Errors: 0

      TX Packets: 29         Discarded: 0          Errors: 0

      RX Bytes: 106924               TX Bytes: 2268

      Device: 0342  Unit: 002   Role: DATA

      Options: Broadcast Multicast IPv6 IPv4 VLAN

        Unicast IP Addresses:

          10.35.11.183         MAC: 02-00-00-00-00-01

          FE80::200:0:100:1    MAC: 02-00-00-00-00-01 Local

        Multicast IP Addresses:                                     
          224.0.0.1            MAC: 01-00-5E-00-00-01               
          224.0.1.22           MAC: 01-00-5E-00-01-16               
          239.255.255.253      MAC: 01-00-5E-7F-FF-FD               
          FF02::1              MAC: 33-33-00-00-00-01 Local         
          FF02::1:FF00:1       MAC: 33-33-FF-00-00-01 Local         
Ready; T=0.01/0.01 08:09:01                                         
 
However, I cannot ping the machine SUSESP2.
 
If I take SUSESP2 out of the VSWITCH and use 3 OSA addresses, I can ping
the machine SUSESP2.
 
What am I doing wrong ?
 

**********************************************************************
This email and any files transmitted with it are confidential and intended 
solely for the use of the individual or entity to whom they are addressed. Any 
unauthorized review, use, disclosure or distribution is prohibited. If you are 
not the intended recipient, please contact the sender by reply e-mail and 
destroy all copies of the original message. 
**********************************************************************

Reply via email to