Try this: XAUTOLOG AUTOLOG2 SYNCH#SET SECUSER AUTOLOG2 *
That will let you watch the startup of AUTOLOG2 and see what might be wrong.. as others have said - it's a good bet it's the privileges (or lack of them) -- Scott Rohling On Thu, Oct 2, 2008 at 1:33 PM, Martin, Terry R. (CMS/CTR) (CTR) < [EMAIL PROTECTED]> wrote: > Hi > > > > I am setting some parameters in my AUTOLOG2 PROFILE EXEC, but they do not > seem to be taking affect. Is there something else I am missing? > > > > The 'CP XAUTLOG xxxxxxx' seems to be working fine but commands such as the > following do not take affect: > > > > /* set recommended performance metrics for zLinux */ > > 'CP SET SRM STORBUF 300 250 200' > > 'CP SET LDBUF 100 100 100' > > /* set Delay for Linux Guest Shutdown */ > > 'CP SET SIGNAL SHUTDOWN 180' /* Allow Linux Guests 3 mins to shutdown*/ > > 'CP SET MDC STOR 0M 256M' > > 'CP SET MDC XSTOR 0M 0M' > > > > To test these I issue the xautolog autolog2 command from MAINT after I have > LINKED to AUTOLOG2. > > > > *Thank You,* > > > > *Terry Martin* > > *Lockheed Martin - Information Technology* > > *z/OS & z/VM Systems - Performance and Tuning* > > *Cell - 443 632-4191* > > *Work - 410 786-0386* > > [EMAIL PROTECTED] > > >