Charles,
Did you grant access to the VSwitch for the virtual machine?
SET VSWITCH VSWITCH1 GRANT NOVSTART
Charles Brosemer wrote:
We are getting a connection problem with our first LINUX guest on z/VM
5.3. I am new to z/VM and do not know networking. I created a TCP/IP
stack that appears to be working through an OSA card (9F00). We were
able to FTP the SUSE Linux install. I created a Virtual Switch that uses
another OSA device (9E00). When we start up the Linux virtual machine,
it apears to connect to the Virtual Switch. When I do a "q vswitch
details", I see a line like the following.
Adapter Connections:
Adaptor Owner : NOVSTART NIC: 0600 Name: UNASSIGNED
We are not able to ping outside the Linux virtual machine or connect to
the virtual machine. I am including an "ifconfig -a" and "q vswitch
details" command output (without the Linux virtual machine being active)
. I do not know what to do next to resolve the problem. Any help from
the list would be appreciated.
ifconfig -a
DMSACC724I 191 replaces A (191)
Ready; T=0.01/0.01 12:46:21
ETH0 inet addr: 172.19.110.100 mask: 255.255.0.0
UP BROADCAST MULTICAST MTU: 1500
vdev: 9F00 rdev: 9F00 type: QDIO ETHERNET portname: UNASSIGNED
ipv4 router type: NONROUTER ipv6: DISABLED
cpu: 0 forwarding: ENABLED
RX bytes: 3642430945 TX bytes: 91662059
Ready; T=0.01/0.02 12:46:21
q vswitch details
VSWITCH SYSTEM VSWITCH1 Type: VSWITCH Connected: 0 Maxconn: INFINITE
PERSISTENT RESTRICTED NONROUTER Accounting: OFF
VLAN Unaware
MAC address: 02-00-00-00-00-01
State: Ready
IPTimeout: 5 QueueStorage: 8
RDEV: 9E00 VDEV: 9E00 Controller: DTCVSW1
VSWITCH Connection:
MAC address: 00-11-25-BD-A6-A0
RX Packets: 0 Discarded: 0 Errors: 0
TX Packets: 0 Discarded: 0 Errors: 0
RX Bytes: 0 TX Bytes: 0
Device: 9E02 Unit: 002 Role: DATA Port: 0001 Index: 0001
Ready; T=0.01/0.01 12:51:13
--
Rich Smrcina
VM Assist, Inc.
Phone: 414-491-6001
Ans Service: 360-715-2467
http://www.linkedin.com/in/richsmrcina
Catch the WAVV! http://www.wavv.org
WAVV 2009 - Orlando, FL - May 15-19, 2009
