Sunny, The following message indicates that you are using virtual devices for your NIC (typical, and correct): 15:50:20 NIC 0600 is created; devices 0600-0602 defined:
They are probably in the CP directory entry for TCPIP. The following messages indicate that you are trying to deal with real device addresses for the NIC, too. That's not recommended in z/VM: HCPCPS040E Device 0600 does not exist DTCRUN1001E "CP VARY ON 0600" failed with return code 40 That's the reason the previous post mentioned your DTCPARMS file. Remove the NIC 600-602 statements for that, unless that's your OSA address. If you are using 600-602 for OSA and NIC, just change references for the virtual NIC addresses in the CP directory for TCPIP, and the files on TCPMAINT 198. Mike Walter Hewitt Associates (Sent from the wee keyboard on a Blackberry.) ----- Original Message ----- From: sunny.hu Sent: 04/30/2009 04:01 PM CST To: IBMVM@LISTSERV.UARK.EDU Subject: How can I make my TCPIP run? I plan to setup VSWITCH on z/VM 5.4 But I couldn't make my TCPIP running. Please give me some advice. Message from TCPMAINT DTCRUN1022I Console log will be sent to default owner ID: TCPMAINT HCPCPS040E Device 0600 does not exist DTCRUN1001E "CP VARY ON 0600" failed with return code 40 DTCRUN1099E Server not started - correct problem and retry DTCRUN1019I Server will not be logged off because you are connected LOGON TCPIP 15:50:20 NIC 0600 is created; devices 0600-0602 defined 15:50:20 z/VM Version 5 Release 4.0, Service Level 0901 (64-bit), 15:50:20 built on IBM Virtualization Technology 15:50:20 There is no logmsg data 15:50:20 FILES: 0002 RDR, 0004 PRT, NO PUN 15:50:20 LOGON AT 15:50:20 MDT THURSDAY 04/30/09 15:50:20 GRAF 1193 LOGON AS TCPIP USERS = 10 z/VM V5.4.0 2009-04-14 15:45 DMSACP723I D (198) R/O DMSACP723I E (591) R/O DMSACP723I F (592) R/O Ready; T=0.01/0.01 15:50:43 15:50:43 PRT FILE 0023 SENT FROM TCPIP CON WAS 0023 RECS 0012 CPY 001 T NOHO LD NOKEEP DTCRUN1022I Console log will be sent to default owner ID: TCPMAINT HCPCPS040E Device 0600 does not exist DTCRUN1001E "CP VARY ON 0600" failed with return code 40 DTCRUN1099E Server not started - correct problem and retry DTCRUN1019I Server will not be logged off because you are connected 15:50:43 CON FILE 0024 SENT TO TCPMAINT RDR AS 0085 RECS 0005 CPY 001 T NOHO LD NOKEEP Ready; T=0.01/0.01 15:50:43 Q v 15:52:38 OSA 0600 ON NIC 0600 UNIT 000 SUBCHANNEL = 0000 15:52:38 0600 DEVTYPE OSA CHPID 02 OSD 15:52:38 0600 MAC 02-00-05-00-00-02 CURRENT 15:52:38 0600 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE 15:52:38 OSA 0601 ON NIC 0600 UNIT 001 SUBCHANNEL = 0001 15:52:38 0601 DEVTYPE OSA CHPID 02 OSD 15:52:38 0601 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE 15:52:38 OSA 0602 ON NIC 0600 UNIT 002 SUBCHANNEL = 0002 15:52:38 0602 DEVTYPE OSA CHPID 02 OSD 15:52:38 0602 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE Here is my settings System config /**********************************************************************/ /* VIRTUAL SWITCH DEFINITIONS */ /**********************************************************************/ DEFINE VSWITCH VSW1 RDEV 0910 0930 CONTROLLER * VMLAN MACPREFIX 020005 TCPIP direct on Dirmaint DVHRXV3355I The preceding records are included from profile: TCPCMSU IUCV ALLOW IUCV ANY PRIORITY IUCV *CCS PRIORITY MSGLIMIT 255 IUCV *VSWITCH MSGLIMIT 65535 OPTION QUICKDSP SVMSTAT MAXCONN 1024 DIAG98 APPLMON SHARE RELATIVE 3000 NICDEF 0600 TYPE QDIO LAN SYSTEM VSW1 LINK 5VMTCP40 0491 0491 RR LINK 5VMTCP40 0492 0492 RR LINK TCPMAINT 0591 0591 RR LINK TCPMAINT 0592 0592 RR LINK TCPMAINT 0198 0198 RR MDISK 0191 3390 2258 005 VP2W02 MR XXXXXXXX XXXXXXXX XXXXXXXX q vswitch 15:55:23 VSWITCH SYSTEM VSW1 Type: VSWITCH Connected: 0 Maxconn: INFINITE 15:55:23 PERSISTENT RESTRICTED NONROUTER Accounting: OFF 15:55:23 VLAN Unaware 15:55:23 MAC address: 02-00-05-00-00-01 15:55:23 State: Ready 15:55:23 IPTimeout: 5 QueueStorage: 8 15:55:23 Isolation Status: OFF 15:55:23 RDEV: 0910.P00 VDEV: 0910 Controller: DTCVSW1 15:55:23 RDEV: 0930.P00 VDEV: 0930 Controller: DTCVSW2 BACKUP Ready; T=0.01/0.01 15:55:23 q osa 15:55:49 OSA 0910 ATTACHED TO DTCVSW1 0910 DEVTYPE OSA CHPID 11 OSD 15:55:49 OSA 0911 ATTACHED TO DTCVSW1 0911 DEVTYPE OSA CHPID 11 OSD 15:55:49 OSA 0912 ATTACHED TO DTCVSW1 0912 DEVTYPE OSA CHPID 11 OSD 15:55:49 OSA 0930 ATTACHED TO DTCVSW2 0930 DEVTYPE OSA CHPID 13 OSD 15:55:49 OSA 0931 ATTACHED TO DTCVSW2 0931 DEVTYPE OSA CHPID 13 OSD 15:55:49 OSA 0932 ATTACHED TO DTCVSW2 0932 DEVTYPE OSA CHPID 13 OSD q vswitch acc 15:57:10 VSWITCH SYSTEM VSW1 Type: VSWITCH Connected: 0 Maxconn: INFINITE 15:57:10 PERSISTENT RESTRICTED NONROUTER Accounting: OFF 15:57:10 VLAN Unaware 15:57:10 MAC address: 02-00-05-00-00-01 15:57:10 State: Ready 15:57:10 IPTimeout: 5 QueueStorage: 8 15:57:10 Isolation Status: OFF 15:57:10 Authorized userids: 15:57:10 SYSTEM TCPIP 15:57:10 RDEV: 0910.P00 VDEV: 0910 Controller: DTCVSW1 15:57:10 RDEV: 0930.P00 VDEV: 0930 Controller: DTCVSW2 BACKUP Sunny Hu I. M. Technical Services W.C.B. Alberta (780) 498-4739 sunny...@wcb.ab.ca This message is intended only for the addressee. It may contain privileged or confidential information. Any unauthorized disclosure is strictly prohibited. If you have received this message in error, please notify us immediately so that we may correct our internal records. Please then delete the original email. Thank you. (Sent by Webgate2) The information contained in this e-mail and any accompanying documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited. All messages sent to and from this e-mail address may be monitored as permitted by applicable law and regulations to ensure compliance with our internal policies and to protect our business. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, lost or destroyed, or contain viruses. You are deemed to have accepted these risks if you communicate with us by e-mail.
