Hi Graham, You can find OSA codes in System z10, System z9 and Eserver zSeriesOpen Systems Adapter-Express Customer's Guide and Reference SA22-7935-10 .. The OSA is probably not cabled up correctly.. :-)
OSA Reject Codes Any of the following OSA return codes can be included in a message displayed by host programs other than OSA/SF. The message description for the other application directs you to this section. E003 An invalid LAN type was detected. Ensure that the LAN type defined in your configuration matches the actual LAN type being used. E003 An invalid LAN type was detected. Ensure that the LAN type defined in your configuration matches the actual LAN type being used. E004 An invalid LAN number was detected. Check the LAN port number specified in your setup. E005 An IP address was received by the OSA port that duplicates an IP address already in use by another MPC (HPDT MPC mode) or LCS (TCP/IP Passthru mode) session attached to the port. Change one of the IP addresses. Refer to the issuing message documentation for information on any other appropriate action to take. E006 The IP address table is full. Remove some of your TCP/IP addresses. See Table 27 on page 259for the limits of each OSA type. E010 The primary default image has already been defined. E00A An IP address was received by the OSA port that duplicates an IP address being used by another IP connection in the IP network. Change one of the IP addresses in the network. E00B Invalid frame type detected. Check that the frame type specified in your setup is correct. E00C Unsupported LAN type. E053 The MAC address specified for a Layer 3 Virtual MAC is not valid. Check the address specified in the TCP/IP profile E054 A Duplicate MAC address was detected for the Layer 3 Virtual MAC being assigned. This MAC address is already in use by another stack. Change one of the Layer 3 Virtual MAC addresses being used. E056 The Virtual MAC address table is full. Remove some of the Layer 3 Virtual MAC addresses and try again. E057 The Layer 3 Virtual MAC being used is the same as the currently assigned OSA universal MAC address. Change either the Layer 3 Virtual MAC or the OSA assigned universal MAC address. E080 A LAN connection could not be made, possibly for one of the following reasons: v The cable may not be present v The LAN may not be functioning v The port may have been disabled from the Support Element (SE) of the server v This may be seen the first time any stack is brought up after the OSA has been taken out of Link Aggregation mode. This occurs due to the OSA dropping light to any attached switch when it was removed from the Link Aggregation. The starting of a new stack causes OSA to re-enable light to the switch. Shortly after this code is posted, it should be followed by the stack initialization message. This is normal operation. (If the stack does not complete initialization after seeing this code, then follow the normal error reporting procedures.)Fix the error as explained above. Then, depending on the error, restart the device or restart TCP/IP. -----Original Message----- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Graeme Moss Sent: 09 October 2009 05:53 To: IBMVM@LISTSERV.UARK.EDU Subject: Cannot find msg explaination Hello Listers, I am working on a new z/VM 5.4 rsu 0902 system. To prove the hardware I have set up a second TCPIP with a new OSA owned by TCPIP2. I am getting this message but cannot track down any information about it. DTCOSD223E OSD device d...@0900: Return code E080 from STRTLAN for IPv4 I have done searches on DTCOSD223E, E080 and STRTLAN. I would like to find out the meaning of the message AND how to find the meaning of the message Thanks in Advance Graeme This e-mail and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose or otherwise act upon any part of this e-mail or its attachments. Internet communications are not guaranteed to be secure or virus-free. The Barclays Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any Internet communications by any third party, or from the transmission of any viruses. Replies to this e-mail may be monitored by the Barclays Group for operational or business reasons. Any opinion or other information in this e-mail or its attachments that does not relate to the business of the Barclays Group is personal to the sender and is not given or endorsed by the Barclays Group. Barclays Bank PLC.Registered in England and Wales (registered no. 1026167). Registered Office: 1 Churchill Place, London, E14 5HP, United Kingdom. Barclays Bank PLC is authorised and regulated by the Financial Services Authority.