You can also enter CONSnnnn in the LOADPARM field, it will also bypass the SAPL screen, but pass CONS=nnnn to CP Example: CONSSYSG starts CP on the "Integrated 3270 console"
2009/12/14 Mike Walter <mike.wal...@hewitt.com> > David, > > What are the arguments on the HMC (or from 1st level when IPLing a 2nd > level system) when you IPL? > > If you DO include an argument "LOADPARM dev_addr", then the SALIPL screen > will appear, requiring F10 to load the system. > If you DO NOT include the "LOADPARM dev_addr", an IPL should not display > the SALIPL screen. > > Remember that when entering "CP SHUTDOWN REIPL", the loadparms used during > the previous IPL are used again (display them with: CP Q IPLPARMS). > With CP SHUTDOWN REIPL you can specify many of the parms that are > available in SALIPL. > > Mike Walter > Hewitt Associates > > > > > "Dean, David (I/S)" <david_d...@bcbst.com> > > Sent by: "The IBM z/VM Operating System" <IBMVM@LISTSERV.UARK.EDU> > 12/14/2009 10:20 AM > Please respond to > "The IBM z/VM Operating System" <IBMVM@LISTSERV.UARK.EDU> > > > > To > IBMVM@LISTSERV.UARK.EDU > cc > > Subject > AUTO IPL > > > > > > > UNCLE! > > I have searched the archives and read the manual?.I know this should be an > easy one. > > My new ZVM 5.4 IPL stops at the SAPL screen and makes me press F10 to > load. > > > This is the existing one that work: > > Features , > auto_ipl , /* No prompt at IPL */ > cold , /* perform cold start */ > drain , > Disable , /* Disable the following features */ > Set_Privclass , /* Disallow SET PRIVCLASS command */ > LogMsg_From_File , /* No LOGMSG from SYSTEM LOGMSG */ > Clear_TDisk , /* Don't clear TDisks at IPL time */ > Retrieve , /* Retrieve options */ > Default 20 , /* Default.... default is 20 */ > Maximum 255 , /* Maximum.... default is 255 */ > MaxUsers noLimit , /* No limit on number of users */ > Passwords_on_Cmds , /* What commands allow passwords? */ > Autolog yes , /* ... AUTOLOG does */ > Link yes , /* ... LINK does */ > Logon yes /* ... and LOGON does, too */ > > > This NO work: requires F10 at SAPL > > Features , > auto_ipl , /* No prompt at IPL */ > cold , /* perform cold start */ > drain , > Disable , /* Disable the following features */ > Set_Privclass , /* Disallow SET PRIVCLASS command */ > Clear_TDisk , /* Don't clear TDisks at IPL time */ > Retrieve , /* Retrieve options */ > Default 20 , /* Default.... default is 20 */ > Maximum 255 , /* Maximum.... default is 255 */ > MaxUsers noLimit , /* No limit on number of users */ > Passwords_on_Cmds , /* What commands allow passwords? */ > Autolog yes , /* ... AUTOLOG does */ > Link yes , /* ... LINK does */ > Logon yes /* ... and LOGON does, too */ > > > > > David M. Dean > Information Systems > BlueCross BlueShield Tennnessee > > > > > ----------------------------------------------------- > Please see the following link for the BlueCross BlueShield of Tennessee > E-mail disclaimer: http://www.bcbst.com/email_disclaimer.shtm > > > > > > The information contained in this e-mail and any accompanying documents may > contain information that is confidential or otherwise protected from > disclosure. If you are not the intended recipient of this message, or if > this message has been addressed to you in error, please immediately alert > the sender by reply e-mail and then delete this message, including any > attachments. Any dissemination, distribution or other use of the contents of > this message by anyone other than the intended recipient is strictly > prohibited. All messages sent to and from this e-mail address may be > monitored as permitted by applicable law and regulations to ensure > compliance with our internal policies and to protect our business. E-mails > are not secure and cannot be guaranteed to be error free as they can be > intercepted, amended, lost or destroyed, or contain viruses. You are deemed > to have accepted these risks if you communicate with us by e-mail. > -- Kris Buelens, IBM Belgium, VM customer support