Terry - we need to see the ifcfg-eth1 file - and maybe ifcfg-eth0 too to help... I think you'll find them under /etc/sysconfig/network-scripts/ (?) You're showing us the config for what works - but not the config for what doesn't...
Scott On Tue, Mar 16, 2010 at 1:29 PM, Martin, Terry R. (CMS/CTR) (CTR) < terry.mar...@cms.hhs.gov> wrote: > Hi > > > > I have a dilemma that I hope you can help with: > > > > I have cloned a z/VM LPAR and a z/Linux guest from my Production system. I > have a VSWITCH set up and a matching NIC def in the Directory for the > z/Linux guest. > > > > I can display the OSA and see that it is attached to the VSWITCH and I can > see that the NIC was configured correctly when the z/Linux guest is logged > on. > > > > The z/Linux guest is RHEL 5.2. The problem is when the guest initializes we > see this message: > > > > Bringing up interface eth1: qeth device eth1 does not seem to be present, > delaying initialization. > > > > When I display the VSWITCH Q VSWITCH DET I expected to see the IP address > associated with the network interface show up in the VSWITCH which tells me > the we can get to the z/Linux guest but I don’t see the IP. > > > > Now if we bring the z/Linux guest up in RESCUE mode where it is reading the > CONF file where I specifically enter the IP address I can display the > VSWITCH and see the IP address associated with the VSWITCH as I expected and > we can PING the z/Linux guest and login to it. > > > > So what am I doing wrong here? Why on a normal boot can’t I see the IP in > the VSWITCH and hence login into the z/Linux guest or PING it but when I > load it using the CONF file in RESCUE mode I can login to the guest and PING > it what am I missing?: > > > > CONF FILE: > > > > /* configuration information for RESCUE MODE */ > > HOSTNAME="E49L054P.CMS.HHS.GOV" > > DASD="700,800-831" > > NETTYPE="qeth" > > SUBCHANNELS="0.0.7403,0.0.7404,0.0.7405" > > PORTNAME=" " > > IPADDR="10.16.49.13" > > NETWORK="10.16.0.0" > > NETMASK="255.255.0.0" > > BROADCAST="10.16.255.255" > > GATEWAY="10.16.0.254" > > SEARCHDNS="cms.hhs.gov" > > LAYER2=0 > > DNS="10.15.0.117" > > MTU="1500" > > > > VSWITCH WHEN GUEST is BROUGHT UP NORMALLY(No 10.16.49.13 IP): > > > > q vswitch vse4ps11 > det > > VSWITCH SYSTEM VSE4PS11 Type: VSWITCH Connected: 1 Maxconn: > INFINITE > > PERSISTENT RESTRICTED NONROUTER Accounting: > OFF > > VLAN Unaware > > > MAC address: > 02-00-00-00-00-03 > > State: > Ready > > IPTimeout: 5 QueueStorage: 8 > > > RDEV: 8903 VDEV: 8903 Controller: > DTCVSW2 > > VSWITCH > Connection: > > MAC address: > 00-14-5E-B7-D4-94 > > RX Packets: 380 Discarded: 110318 Errors: > 0 > > TX Packets: 357 Discarded: 0 Errors: > 0 > > RX Bytes: 31684 TX Bytes: > 99369 > > Device: 8903 Unit: 000 Role: DATA Port: 0001 Index: > 0001 > > Adapter > Connections: > > Adapter Owner: E49L054P NIC: 7403 Name: > UNASSIGNED > > RX Packets: 986 Discarded: 0 Errors: > 0 > > TX Packets: 0 Discarded: 0 Errors: > 0 > > RX Bytes: 89162 TX Bytes: > 0 > > Device: 7405 Unit: 002 Role: DATA Port: 0073 Index: > 0010 > > Options: Broadcast Multicast IPv6 IPv4 VLAN > > > > VSWITCH DISPLAY AFTER GUEST UP IN RESCUE MODE : > > > > q vswitch vse4ps11 det > > > VSWITCH SYSTEM VSE4PS11 Type: VSWITCH Connected: 1 Maxconn: INFINITE > > > PERSISTENT RESTRICTED NONROUTER Accounting: OFF > > > VLAN Unaware > > > MAC address: 02-00-00-00-00-03 > > > State: Ready > > > IPTimeout: 5 QueueStorage: 8 > > > RDEV: 8903 VDEV: 8903 Controller: DTCVSW2 > > > VSWITCH Connection: > > > MAC address: 00-14-5E-B7-D4-94 > > > RX Packets: 380 Discarded: 110392 Errors: 0 > > > TX Packets: 364 Discarded: 0 Errors: 0 > > > RX Bytes: 31684 TX Bytes: 99921 > > > Device: 8903 Unit: 000 Role: DATA Port: 0001 Index: 0001 > > > Adapter Connections: > > > Adapter Owner: E49L054P NIC: 7403 Name: UNASSIGNED > > > RX Packets: 491 Discarded: 0 Errors: 0 > > > TX Packets: 7 Discarded: 0 Errors: 0 > > > RX Bytes: 43429 TX Bytes: 552 > > > Device: 7405 Unit: 002 Role: DATA Port: 0074 Index: 0011 > > > Options: Broadcast Multicast IPv6 IPv4 VLAN > > > Unicast IP Addresses: > > 10.16.49.13 MAC: > 02-00-00-00-00-04 > > FE80::200:0:100:4 MAC: 02-00-00-00-00-04 > Local > > Multicast IP > Addresses: > > 224.0.0.1 MAC: > 01-00-5E-00-00-01 > > FF02::1 MAC: 33-33-00-00-00-01 > Local > > FF02::1:FF00:4 MAC: 33-33-FF-00-00-04 > Local > > q vswitch vse4ps11 det > VSWI > > TCH SYSTEM VSE4PS11 Type: VSWITCH Connected: 1 > Maxco > > > > > > > > > > > > > > *Thank You,* > > * * > > *Terry Martin* > > *Lockheed Martin - Citic* > > *z/OS and z/VM Performance Tuning and Operating Systems Support* > > *Office - 443 348-2102* > > *Cell - 443 632-4191* > > >
