What that step is doing is making sure the transfer is an F 1028 binary transfer. Make sure you do that in whatever emulator you're using.
________________________________ From: The IBM z/VM Operating System on behalf of Martin, Terry R. (CMS/CTR) (CTR) Sent: Sun 3/28/2010 2:06 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z/VM 5.4 Install question Jonathan, One other thing in the manual in appendix J one of the steps says to: 1) In the Transfer Type field, enter "dvdbinary". Did you do this or did you just make sure it said BINARY? I can't the significance of this if the SEND is actually coming from my desk top instead of DVD. Thank You, Terry Martin Lockheed Martin - Citic z/OS and z/VM Performance Tuning and Operating Systems Support Office - 443 348-2102 Cell - 443 632-4191 -----Original Message----- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Quay, Jonathan (IHG) Sent: Sunday, March 28, 2010 1:22 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z/VM 5.4 Install question Terry, when I did this, I received .zip files from ShopZSeries. I unzipped them in to a directory structure on my workstation. Then I used my terminal emulator (PCOM) to upload them to a minidisk on my 1st level system's VM 5.4 installation userid (MAINT54 in my case). Instructions/requirements for that userid are on pp 61-62 of. the Guide for Automated Installation and Service. Then follow the instructions in Appendix J. Use the .srl file and the upload is automated for you. ________________________________ From: The IBM z/VM Operating System on behalf of Martin, Terry R. (CMS/CTR) (CTR) Sent: Sun 3/28/2010 12:19 PM To: IBMVM@LISTSERV.UARK.EDU Subject: z/VM 5.4 Install question <P> Hi This has probably been broached before here but I could not find the specifics that I was looking for sorry if this is a repeat question. Anyway I am getting ready to install z/VM 5.4 and I ordered the product via Shop Z Series. I was able to download everything including the RSU to my desk top all in the same folder. Since I do not have the means at this time to do the install via DVD I was going to use a Terminal Emulator to Upload Files and install via a z/VM mini disk. I am using the Automated Install and Service Guide as my reference for the install. I know this is going to be slow but it looks like it will work. My question is that it is a little confusing when it keeps talking about the DVD install I am assuming that since the download to my desk top into a folder called CPDVD that by SENDING it via the Terminal Emulator to my z/VM system to a mini disk that it is the same thing as if it were on a real DVD is this a correct assumption? Please add any other information that you think I should be aware of. This is my first real install of the operating system so I want to do it right. Thanks for the help!! Thank You, Terry Martin Lockheed Martin - Citic z/OS and z/VM Performance Tuning and Operating Systems Support Office - 443 348-2102 Cell - 443 632-4191 cid:image001.jpg@01C97FB5.5EAFD6C0<P>
