Not yet, have to figure out how to delete this partially defined one, since there doesn't appear to be a "DELETE VSWITCH" (at least in the manual I'm looking at).
Frank M. Ramaekers Jr. ________________________________ From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Hughes, Jim Sent: Friday, August 27, 2010 10:05 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Defining VSWITCH difficulties We don't specify portnames when we define our vswitches. Have you tried defining your vswitch without specifying portnames? ____________________ Jim Hughes 603-271-5586 "It is fun to do the impossible." ________________________________ From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Frank M. Ramaekers Sent: Friday, August 27, 2010 10:57 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Defining VSWITCH difficulties Okay, but I don't understand this either? ***** 08/27/10 ***** 09:26:39 DTCOSD360I VSWITCH-OSD link added for VSWAILT181DDEV 09:26:39 DTCOSD080I VSWITCH-OSD initializing: 09:26:39 DTCPRI385I Device VSWAILT181DDEV: 09:26:39 DTCPRI386I Type: VSWITCH-OSD, Status: Not started 09:26:39 DTCPRI387I Envelope queue size: 0 09:26:39 DTCPRI497I Address: 181D Port Number: 0 09:26:39 DTCOSD310E VSWITCH-OSD device VSWAILT181DDEV: Missing or incorrect required port name 09:26:39 DTCOSD082E VSWITCH-OSD shutting down: 09:26:39 DTCPRI385I Device VSWAILT181DDEV: 09:26:39 DTCPRI386I Type: VSWITCH-OSD, Status: Inoperative 09:26:39 DTCPRI387I Envelope queue size: 0 09:26:39 DTCPRI497I Address: 181D Port Number: 0 OSA 181D DETACHED DTCVSW2 181D BY DTCVSW2 OSA 181E DETACHED DTCVSW2 181E BY DTCVSW2 OSA 181F DETACHED DTCVSW2 181F BY DTCVSW2 09:26:39 DTCOSD361I VSWITCH-OSD link removed for VSWAILT181DDEV 09:26:39 DTCOSD360I VSWITCH-OSD link added for VSWAILT1200DEV 09:26:39 DTCOSD080I VSWITCH-OSD initializing: 09:26:39 DTCPRI385I Device VSWAILT1200DEV: 09:26:39 DTCPRI386I Type: VSWITCH-OSD, Status: Not started 09:26:39 DTCPRI387I Envelope queue size: 0 09:26:39 DTCPRI497I Address: 1200 Port Number: 0 09:26:39 DTCQDI001I QDIO device VSWAILT1200DEV device number 1200: 09:26:39 DTCQDI007I Enabled for QDIO data transfers 09:26:39 DTCOSD238I ToOsd: IPv4 multicast support enabled for VSWAILT1200DEV 09:26:39 DTCOSD319I ProcessSetArpCache: Supported for device VSWAILT1200DEV 09:26:39 DTCOSD341I Obtained MAC address 00145EB77AC5 for device VSWAILT1200DEV 09:26:39 DTCOSD238I ToOsd: IPv6 multicast support enabled for VSWAILT1200DEV Frank M. Ramaekers Jr. ________________________________ From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Marcy Cortes Sent: Friday, August 27, 2010 9:49 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Defining VSWITCH difficulties Any additional messages on DTCVSW2's console? ________________________________ From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Frank M. Ramaekers Sent: Friday, August 27, 2010 7:39 AM To: IBMVM@LISTSERV.UARK.EDU Subject: [IBMVM] Defining VSWITCH difficulties I'm attempting to define a new VSWITCH: define vswitch vswailt rdev 181d 1200 portname osa181d osa1200 VSWITCH SYSTEM VSWAILT is created Ready; T=0.01/0.01 09:26:39 HCPSWU2832E Connection 181D.P00 for VSWITCH SYSTEM VSWAILT is not active. HCPSWU2832E Device is detached from DTCVSW2. HCPSWU2830I VSWITCH SYSTEM VSWAILT status is ready. HCPSWU2830I DTCVSW2 is VSWITCH controller for device 1200.P00. But, I don't see what the problem is with 181D (through 181F): q vswitch VSWITCH SYSTEM VSWAILT Type: VSWITCH Connected: 0 Maxconn: INFINITE PERSISTENT RESTRICTED NONROUTER Accounting: OFF VLAN Unaware MAC address: 02-00-01-00-00-0D State: Ready IPTimeout: 5 QueueStorage: 8 Isolation Status: OFF Portname: OSA181D RDEV: 181D.P00 Controller: NONE Error: Detached Portname: OSA1200 RDEV: 1200.P00 Controller: DTCVSW2 VDEV: 1200 : : q paths 181d Device 181D, Status ONLINE CHPIDs to Device 181D (PIM) : 90 Physically Available (PAM) : + Online (LPM) : + Legend + Yes - No Ready; T=0.01/0.01 09:30:21 cp q 181d-181f OSA 181D FREE , OSA 181E FREE , OSA 181F FREE Ready; T=0.01/0.01 09:38:15 The error message HCPSWU2832E doesn't give me much to go on. Any ideas? Frank M. Ramaekers Jr. Systems Programmer MCP, MCP+I, MCSE & RHCE American Income Life Insurance Co. Phone: (254)761-6649 1200 Wooded Acres Dr. Fax: (254)741-5777 Waco, Texas 76701 _____________________________________________________ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com. _____________________________________________________ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com. _____________________________________________________ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com.
