In the TCPIP job on VSE, did you up the storage for VSWITCH?
Tom Duerbusch THD Consulting >>> "Frank M. Ramaekers" <framaek...@ailife.com> 8/27/2010 2:49 PM >>> Mark, Yep: set vswitch vswailt grant ailtest Command complete Ready; T=0.01/0.01 12:40:23 Frank M. Ramaekers Jr. From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Mark Pace Sent: Friday, August 27, 2010 2:45 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: VSWITCH defined VSE TCP/IP fails Did you Grant access to the vswitch? On Fri, Aug 27, 2010 at 3:37 PM, Frank M. Ramaekers <framaek...@ailife.com> wrote: Layer 3. Frank M. Ramaekers Jr. From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Mark Pace Sent: Friday, August 27, 2010 2:29 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: VSWITCH defined VSE TCP/IP fails Is it a layer 2 or 3 vswitch? VSE and z/OS only support layer3. :( On Fri, Aug 27, 2010 at 3:18 PM, Frank M. Ramaekers <framaek...@ailife.com> wrote: The VSWITCH seems to be defined just fine and the NICDEF added to the directory of the z/VSE. From z/VSE: * cp q v aa0-aa2 AR 0015 OSA 0AA0 ON NIC 0AA0 UNIT 000 SUBCHANNEL = 003A AR 0015 0AA0 DEVTYPE OSA CHPID 03 OSD AR 0015 0AA0 MAC 02-00-01-00-00-0E CURRENT AR 0015 0AA0 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE AR 0015 OSA 0AA1 ON NIC 0AA0 UNIT 001 SUBCHANNEL = 003B AR 0015 0AA1 DEVTYPE OSA CHPID 03 OSD AR 0015 0AA1 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE AR 0015 OSA 0AA2 ON NIC 0AA0 UNIT 002 SUBCHANNEL = 003C AR 0015 0AA2 DEVTYPE OSA CHPID 03 OSD AR 0015 0AA2 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE But when the CSI TCP/IP stack tries to initialize, it receives: G1 0484 0S39I ERROR DURING OSA EXPRESS PROCESSING,REASON=0035 CUU=0AA0,RETCODE=E080 G1 0487 0003: IPL605E Unable to Initialize IJBOSA, return code: 122 G1 0487 0003: IPL609E Unable to initialize OSA Express, Link: AILLAN0 G1 0487 0004: IPL491I OSA-X link AILHIS0 started as 10.1.20.2 G1 0487 0005: IPL491I OSA-X link AILVSW0 started as 192.168.199.2 (The AILVSW0 is a previous defined VSWITCH that is internal only to communicate between VMs. And this has been working for quite some time now.) There is nothing notable on the DTCVSWn consoles. The error message description is less than hepful: REASON = X’0035’ The Startlan function failed. This is most likely indicated by RETCODE=E080. Thoughts? Frank M. Ramaekers Jr. Systems ProgrammerMCP, MCP+I, MCSE & RHCE American Income Life Insurance Co.Phone: (254)761-6649 1200 Wooded Acres Dr.Fax: (254)741-5777 Waco, Texas 76701 _____________________________________________________ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com. -- Mark D Pace Senior Systems Engineer Mainline Information Systems _____________________________________________________ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com. -- Mark D Pace Senior Systems Engineer Mainline Information Systems _____________________________________________________ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com.