That's slllllllllllick. ________________________________
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Frank M. Ramaekers Sent: Wednesday, October 20, 2010 10:35 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Duplicate VOLSERs at IPL Here's what I do (I think you remember my FLASH2ND EXEC): 1) Use FLASH2ND to create a 2nd level/backup system a. This will use a new prefixed VOLID of '54B' (replacing the 540). b. Updates the SYSTEM CONFIG reflecting the new VOLID c. Updates a copy of the 1st level directory (USER2 DIRECT) changing the VOLIDs to match the new prefix d. Runs DIRECT against the 2nd level/backup system with the updated directory (USER2 DIRECT). 2) FLASH2ND process creates unique VolSer (VOLID) and is IPLable (w/o changes) Frank M. Ramaekers Jr. ________________________________ From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of George Henke/NYLIC Sent: Wednesday, October 20, 2010 10:24 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Duplicate VOLSERs at IPL I plan to DDRed my system disks 540RES, 540SPL, 540W01, 540W02, before I apply maintenance to Level 1 and PUT2PROD, so that I have a *hot* fallback when I IPL. the maintenance. How can I be sure the IPL will not pick up these standby disks but WILL pick them up if I need them for fallback? Is just changing the 540RES IPL address enough? _____________________________________________________ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com.
