You should use my suggestion to mount the second (and following) tapes. For the first one you use your current mount command
2010/11/30 Järvinen, Janne <janne.jarvi...@logica.com> > Unfortunatelly this did not help. > > I made the mount as Kris suggested, then started my DDR session. > > Got HCP704E DEVICE <rdev!vdev> NOT OPERATIONAL (because rdev is not > attached to my DDR-user, I think) > > > ------------------------------ > *From:* The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] *On > Behalf Of *Kris Buelens > *Sent:* 30. marraskuuta 2010 10:53 > *To:* IBMVM@LISTSERV.UARK.EDU > *Subject:* Re: DDR multivolume tape as output > > I've got no experience with DFSMRM > But, what about: > DFSMSRM MOUNT CAT SCRATCH0 (NOATTACH RDEV xxxx > executed from another userid, and xxxx is the real devioce number of the > tape MAINT has gotten as 181 > (info gotten via HELP DFSMS) > > 2010/11/30 Janne Jarvinen <janne.jarvi...@logica.com> > >> Hello, >> >> I'm a z/OS person and have some diffuculties to uderstand how to use VTS >> tapes in z/VM environment, hopefully get some help from this forum. >> >> How to mount the second DDR dump-tape under VM? >> >> Want to DUMP my SYSRES to tape: >> >> 1. MAINT: DFSMSRM MOUNT CAT SCRATCH0 >> >> >> DGTUIR2026I DFSMS request 84 accepted for >> processing >> Ready; T=0.01/0.01 >> 10:24:22 >> TAPE 0D3F ATTACHED TO MAINT >> 0D3F >> 10:24:24 * MSG FROM RMSMASTR: FSMBCR2120I Request 84 complete; volume >> V900 >> 02, category SCRATCH0, mounted on device 0D3F in library >> IBMVTS1 >> 10:24:24 * MSG FROM RMSMASTR: FSMBEC2125I Request 84: device 0D3F >> attached >> to MAINT as 0D3F; access mode = >> READWRITE >> >> 2. MAINT DDR >> SYS CONS >> IN 123 DASD >> OUT D3F TAPE >> DUMP ALL >> YES >> >> 3. After writing the first tape full, DDR want's the second one. >> How to mount it? The rdev d3f is attached to MAINT, so can't mount from >> another machine/user. MAINT is "in DDR session" so can't mount from there >> either. >> >> 4. The tapesystem is VTS using 3584 library. >> Any ideas how to get the following output tapes mounted? >> (I tested DDR output parm altape to write two tapes but then third tape >> was >> required and there I was again ... ) >> >> Thanks >> Janne J >> >> >> >> >> > > > -- > Kris Buelens, > IBM Belgium, VM customer support > > Think green - keep it on the screen. This e-mail and any attachment is for > authorised use by the intended recipient(s) only. It may contain proprietary > material, confidential information and/or be subject to legal privilege. It > should not be copied, disclosed to, retained or used by, any other party. If > you are not an intended recipient then please promptly delete this e-mail > and any attachment and all copies and inform the sender. Thank you. > -- Kris Buelens, IBM Belgium, VM customer support