We have a new Z10 with 2 four port OSA Express 3 cards and 1 two port OSA Express cards.
I am a little confused about the IOCP for these devices. I am reading the IOCP manual and I am a little confused about having two ports on a card. Would I define one CNTLUNIT and one IODEVICE for each pair of ports? If so, would the address.Pnn come into play with Pnn being 00 or 01 for the port number? I am referring to the DEFINE VSWITCH command. Continuing on, if the above is true, could I put 64 addresses on a single IODEVICE statement and the use the Pnn format of the DEFINE VSWITCH RDEV statement to control the addresses I use on each of the two ports? Example: RDEV E000.P00 and RDEV E010.P01 I hope my question makes sense. Regards, ____________________ James R. Hughes TSG, Problem Solver NH Department of Information Technology 603-271-5586(w); 603-491-3071(c) www.nh.gov/doit "Statement of Confidentiality: The contents of this message are confidential. Any unauthorized disclosure, reproduction, use or dissemination (either whole or in part) is prohibited. If you are not the intended recipient of this message, please notify the sender immediately and delete the message from your system." It is fun to do the impossible.
