I issued a LINK RR against it and did a Q LINKS and it shows no other link access to that disk. Would it be possible that when we paused PPRC and suspended Global Mirror on the z/OS LPAR (shared volumes between all LPARS) that it may have accessed the dasd the minidisk is on in write mode and caused the access mode on the z/VM LPAR to go into a READ-MODE? Is that probable?
Steve. ________________________________ From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf Of Mark Pace Sent: Tuesday, March 01, 2011 2:57 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: zLinux OS disk read-only M Multiple-write access. Write access is established unless another user holds a write, a stable (SR, SW, SM) or an exclusive (ER, EW) mode access to the disk. Looks like some other VM has that disk linked in write mode. On Tue, Mar 1, 2011 at 3:53 PM, Perez, Steve S <sspe...@corelogic.com<mailto:sspe...@corelogic.com>> wrote: The disk is defined as follows. This is an excerpt from the CP directory: IPL 200 ..... LINK RHMASTER 199 199 RR MDISK 200 3390 1 10016 LX53B5 M Unfortunately, the console log did not get spooled so I don't know what the log would have indicated for that disk when the guest machine came up. That's on my follow-up list. The guest machine is IPL'd off of its OS (disk 200) disk when it comes up (in its CP Directory) so I need to find a way to spool the console when it starts and not later after it has gone through its initialization. Thanks, Steve -----Original Message----- From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU<mailto:IBMVM@LISTSERV.UARK.EDU>] On Behalf Of RPN01 Sent: Tuesday, March 01, 2011 2:33 PM To: IBMVM@LISTSERV.UARK.EDU<mailto:IBMVM@LISTSERV.UARK.EDU> Subject: Re: zLinux OS disk read-only How is the disk defined in the CP Directory entry (i.e. What is the mode of the disk), and what is in the console log when the user was logged in that could give a clue about the status of the disk when the user was initialized? The mode will tell you the condition(s) that could lead to it being read only (other users having it read/write or even read only), and the log may even tell you which or how many users gummed up the works, or when things when oval on you. In any case, it had to have happened at some point, and there has to be a footprint, if you keep your logs. -- Robert P. Nix Mayo Foundation .~. RO-OC-1-18 200 First Street SW /V\ 507-284-0844 Rochester, MN 55905 /( )\ ----- ^^-^^ "In theory, theory and practice are the same, but in practice, theory and practice are different." On 3/1/11 2:23 PM, "Steve Perez" <sspe...@corelogic.com<mailto:sspe...@corelogic.com>> wrote: > Hello All, > > Has anyone run into a situation where the zLinux OS disk has become > READ- > > ONLY access? We are running z/Linux under z/VM 5.4 Redhat 5.4. > > My zLinux Admin were doing compares between the production environment > > versus the Test D/R environment and noticed it. He issued the > following > > on the prod zLinux guest environment: > > # mount -o remount,rw /dev/VolGroup01/LogVol00 > mount: block device /dev/VolGroup01/LogVol00 is write-protected, > mounting > > read-only > > Since we are testing our D/R process at the moment for the z/VM LPAR > we > > are unsure at this point whether that is a contributing factor. It > shoul d not be but we can't rule it out. We paused our PPRC/Global > mirroring fro m the z/OS side before starting the D/R activities to > perform recovery of > > the z/VM & z/Linux. The problem was found while in the middle of > verifying/comparing environments on the zLinux side. I can link to > the > > minidisk that is used to IPL that zLinux guest and it shows R/W when I > > issue Q LINKS. All other minidisks owned by that zLinux guest are R/W a > s > well. From my perspective (z/VM) all looks good. > > Any input would be appreciated, if anything to rule out that PPRC/GM > woul d have contributed to this. > > Thanks. > Steve. ****************************************************************************************** This message may contain confidential or proprietary information intended only for the use of the addressee(s) named above or may contain information that is legally privileged. If you are not the intended addressee, or the person responsible for delivering it to the intended addressee, you are hereby notified that reading, disseminating, distributing or copying this message is strictly prohibited. If you have received this message by mistake, please immediately notify us by replying to the message and delete the original message and any copies immediately thereafter. Thank you. ****************************************************************************************** CLLD -- Mark D Pace Senior Systems Engineer Mainline Information Systems
