Hi Stefan, yes this is the case virt. LAN is only for internal use, as I stated first..
Mit freundlichen Grüßen / Kind regards
Joerg Haertel
FTSS zSeries, z/VM, z/VSE, Linux on z, Virtualization, Performance
IBM Sales & Distribution, STG Sales
STG Technical Sales Enterprise Systems FSS
Phone:
+49-89 4504-3240
IBM Deutschland
Home:
+49 89 1222 9775
Hollerithstr. 1
Mobile:
+49-171 30 59 653
81829 München
E-Mail:
haer...@de.ibm.com
Germany
IBM Deutschland GmbH / Vorsitzender des Aufsichtsrats: Martin Jetter
Geschäftsführung: Martina Koederitz (Vorsitzende), Reinhard Reschke,
Dieter Scholz, Michael Diemer, Gregor Pillen
Sitz der Gesellschaft: Ehningen / Registergericht: Amtsgericht Stuttgart,
HRB 14562 / WEEE-Reg.-Nr. DE 99369940
Stefan Raabe <stefan.ra...@deutsche-boerse.com>
Sent by: The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU>
23.05.2011 14:51
Please respond to
The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU>
To
IBMVM@LISTSERV.UARK.EDU
cc
Subject
Re: Create z/VM Layer 2 VLAN / VSwitch
Hello,
yes we tried that too, and now this is working.
so now we use NICDEF -> VSWITCH with VLAN 001
What i tried was NICDEF -> LAN -> VSWITCH with VLNAN 485 which did not
work, even when trying with VLAN 001. Is this gerneral not possible? Is
the VM LAN for internal commuication only and can not be connected via
VSWITCH to the outside world?!?
Regards, Stefan
Karl Kingston <karlkings...@ongov.net>
Sent by: The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU>
23.05.2011 13:36
Please respond to
The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU>
To
IBMVM@LISTSERV.UARK.EDU
cc
Subject
Re: Create z/VM Layer 2 VLAN / VSwitch
Why are you issuing the "DEFINE LAN" command? You don't need it.
Your NICDEF should be connected to VMT1VSW0 not VMT1LN01.
This is why you can't connect anywhere. If you use "DEFINE LAN", you're
just building an internal to z/VM only lan. You don't need this unless
you're doing guest to guest communications.
From: Stefan Raabe <stefan.ra...@deutsche-boerse.com>
To: IBMVM@LISTSERV.UARK.EDU
Date: 05/23/2011 05:38 AM
Subject: Create z/VM Layer 2 VLAN / VSwitch
Sent by: The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU>
Hi,
i am not a networking expert, but need to build a layer 2 vlan in z/VM
5.4. Linux is Suse SLES 11 SP1.
I was told to use layer 2 for VLAN 485 so i used these commands to create
vswitch / vlan
DEFINE VSWITCH VMT1VSW0 RDEV E606 E706 CONTROLLER * ETHERNET VLAN 485
native 485
DEFINE LAN VMT1LN01 OWNERID SYSTEM TYPE QDIO ETHERNET MAXCONN INFINITE
UNRESTRICTED ACCOUNTING OFF
the Linux guest nic is defined in the directory
NICDEF 9000 TYPE QDIO DEVICES 3 LAN SYSTEM VMT1LN01 MACID E32200
So after defining / starting everything my system looks like this:
q vmlan
VMLAN maintenance level:
Latest Service: VM64604
VMLAN MAC address assignment:
MACADDR Prefix: 02FFFF
MACIDRANGE SYSTEM: 000001-FFFFFF
USER: 000000-000000
VMLAN default accounting status:
SYSTEM Accounting: OFF USER Accounting: OFF
VMLAN general activity:
PERSISTENT Limit: INFINITE Current: 2
TRANSIENT Limit: INFINITE Current: 0
Ready; T=0.01/0.01 11:27:19
q vswitch details
VSWITCH SYSTEM VMT1VSW0 Type: VSWITCH Connected: 0 Maxconn: INFINITE
PERSISTENT RESTRICTED ETHERNET Accounting: OFF
VLAN Aware Default VLAN: 0485 Default Porttype: Access GVRP: Enabled
Native VLAN: 0485 VLAN Counters: OFF
MAC address: 02-FF-FF-00-00-01
State: Ready
IPTimeout: 5 QueueStorage: 8
Isolation Status: OFF
RDEV: E606.P00 VDEV: E606 Controller: DTCVSW2
VSWITCH Connection:
RX Packets: 0 Discarded: 0 Errors: 0
TX Packets: 0 Discarded: 0 Errors: 0
RX Bytes: 0 TX Bytes: 0
Device: E606 Unit: 000 Role: DATA vPort: 0001 Index: 0001
RDEV: E706.P00 VDEV: E706 Controller: DTCVSW1 BACKUP
Ready; T=0.01/0.01 11:28:10
q lan details
LAN SYSTEM VMT1LN01 Type: QDIO Connected: 1 Maxconn: INFINITE
PERSISTENT UNRESTRICTED ETHERNET Accounting: OFF
IPTimeout: 5
Isolation Status: OFF
Adapter Connections:
Adapter Owner: LXDBST22 NIC: 9000.P00 Name: 0
RX Packets: 0 Discarded: 0 Errors: 0
TX Packets: 0 Discarded: 81 Errors: 0
RX Bytes: 0 TX Bytes: 0
Device: 9002 Unit: 002 Role: DATA vPort: 0065 Index: 0065
Options: Ethernet Broadcast
Unicast MAC Addresses:
02-FF-FF-E3-22-00
Multicast MAC Addresses:
01-00-5E-00-00-01
33-33-00-00-00-01
33-33-FF-E3-22-00
VSWITCH SYSTEM VMT1VSW0 Type: VSWITCH Connected: 0 Maxconn: INFINITE
PERSISTENT RESTRICTED ETHERNET Accounting: OFF
VLAN Aware Default VLAN: 0485 Default Porttype: Access GVRP: Enabled
Native VLAN: 0485 VLAN Counters: OFF
MAC address: 02-FF-FF-00-00-01
State: Ready
IPTimeout: 5 QueueStorage: 8
Isolation Status: OFF
RDEV: E606.P00 VDEV: E606 Controller: DTCVSW2
RDEV: E706.P00 VDEV: E706 Controller: DTCVSW1 BACKUP
i also performed the proper RACF definitions for vlan 0485 (UACC(UPDATE))
+ refresh
nic defined in the linux guest using yast with proper ip address.
but i can not get any ping to work from / to the linux system. i know this
is also related to the routes which are not changed at the moment, but i
should be able to see a ping comming in using tcpdump, or not ?!?
any hint what is wrong in my configuraiton?!?
Regards, Stefan
-------------------------------------------------------------------------
Deutsche Börse AG
Chairman of the Supervisory Board/
Vorsitzender des Aufsichtsrats:
Dr. Manfred Gentz
Executive Board/Vorstand:
Reto Francioni (Chief Executive Officer/Vorsitzender),
Andreas Preuss (Deputy Chief Executive Officer/
stellv. Vorsitzender), Frank Gerstenschläger,
Michael Kuhn, Gregor Pottmeyer, Jeffrey Tessler.
Aktiengesellschaft with registered seat in/mit Sitz in
Frankfurt am Main.
Commercial register/Handelsregister:
Local court/Amtsgericht Frankfurt am Main HRB 32232.
-----------------------------------------
Diese E-Mail enthaelt vertrauliche oder rechtlich geschuetzte
Informationen.
Wenn Sie nicht der beabsichtigte Empfaenger sind, informieren Sie bitte
sofort den Absender und loeschen Sie diese E-Mail. Das unbefugte Kopieren
dieser E-Mail oder die unbefugte Weitergabe der enthaltenen Informationen
ist nicht gestattet.
The information contained in this message is confidential or protected by
law. If you are not the intended recipient, please contact the sender and
delete this message. Any unauthorised copying of this message or
unauthorised distribution of the information contained herein is
prohibited.
Legally required information for business correspondence/
Gesetzliche Pflichtangaben fuer Geschaeftskorrespondenz:
http://deutsche-boerse.com/letterhead
-------------------------------------------------------------------------
Deutsche Börse AG
Chairman of the Supervisory Board/
Vorsitzender des Aufsichtsrats:
Dr. Manfred Gentz
Executive Board/Vorstand:
Reto Francioni (Chief Executive Officer/Vorsitzender),
Andreas Preuss (Deputy Chief Executive Officer/
stellv. Vorsitzender), Frank Gerstenschläger,
Michael Kuhn, Gregor Pottmeyer, Jeffrey Tessler.
Aktiengesellschaft with registered seat in/mit Sitz in
Frankfurt am Main.
Commercial register/Handelsregister:
Local court/Amtsgericht Frankfurt am Main HRB 32232.
-----------------------------------------
Diese E-Mail enthaelt vertrauliche oder rechtlich geschuetzte
Informationen.
Wenn Sie nicht der beabsichtigte Empfaenger sind, informieren Sie bitte
sofort den Absender und loeschen Sie diese E-Mail. Das unbefugte Kopieren
dieser E-Mail oder die unbefugte Weitergabe der enthaltenen Informationen
ist nicht gestattet.
The information contained in this message is confidential or protected by
law. If you are not the intended recipient, please contact the sender and
delete this message. Any unauthorised copying of this message or
unauthorised distribution of the information contained herein is
prohibited.
Legally required information for business correspondence/
Gesetzliche Pflichtangaben fuer Geschaeftskorrespondenz:
http://deutsche-boerse.com/letterhead
<<image/gif>>
