Rony Ferdiansyah wrote:
>
> > Bagaimana caranya mengetahui bahwa netcard saya sudah bekerja
> > saya pakai RH5.0
>
> coba pake dmesg
> #dmesg
> lalu lihat apakah network card anda kedetek ato tidak
> misal netcard anda ne2000 pd io=300 irq 10
> maka kalo netcard kedetek akan terdapat pesan:
>
> NE2000 ethernetcard probe at 0x300
> eth0: NE200 found at 0x300, using IRQ 10
kalau di coba pake command
#dmesg
keluar :
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000fa000
pcibios_init : BIOS32 Service Directory entry at 0xf3c00
pcibios_init : PCI BIOS revision 2.10 entry at 0xf42b2
Probing PCI hardware.
Warning : Unknown PCI device (e11:4000). Please read
include/linux/pci.h
Warning : Unknown PCI device (e11:4000). Please read
include/linux/pci.h
Warning : Unknown PCI device (e11:4000). Please read
include/linux/pci.h
Warning : Unknown PCI device (e11:4000). Please read
include/linux/pci.h
Warning : Unknown PCI device (e11:4000). Please read
include/linux/pci.h
Warning : Unknown PCI device (e11:4000). Please read
include/linux/pci.h
Warning : Unknown PCI device (e11:4000). Please read
include/linux/pci.h
Warning : Unknown PCI device (e11:4000). Please read
include/linux/pci.h
Warning : Unknown PCI device (e11:a0f3). Please read
include/linux/pci.h
Warning : Unknown PCI device (e11:ae33). Please read
include/linux/pci.h
Calibrating delay loop.. ok - 53.25 BogoMIPS
Memory: 14684k/16384k available (736k kernel code, 384k reserved, 580k
data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP
VFS: Diskquotas version dquot_5.6.0 initialized
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Intel Pentium with F0 0F bug - workaround enabled.
moving IDT ... ... done
Linux version 2.0.32 ([EMAIL PROTECTED]) (gcc version 2.7.2.3) #1
Wed Nov 19 00:46:45 EST 1997
Starting kswapd v 1.4.2.2
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
PS/2 auxiliary pointing device detected -- driver installed.
Real Time Clock Driver v1.07
Ramdisk driver initialized : 16 ramdisks of 4096K size
hda: Maxtor 71629 AP, 1554MB w/128kB Cache, CHS=789/64/63
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.35 MAX_MD_DEV=4, MAX_REAL=8
scsi : 0 hosts.
scsi : detected total.
Partition check:
hda: hda1 hda2 < hda5 hda6 >
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 32220k swap-space (priority -1)
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
SB 4.13 detected OK (220)
Installed 0
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft
1993-1996
Swansea University Computer Society IPX 0.34 for NET3.035
IPX Portions Copyright (c) 1995 Caldera, Inc.
Appletalk 0.17 for Linux NET3.035
apa artinya
>
> lalu berikan perintah : #netstat -ain
> kalo netcard anda bekerja baik ... dia akan muncul disitu
>
> #netstat -ain
> Kernel Interface Table
> Iface ... ... ... ... ... ... ... ...
> lo ... ... ... ... ... ... ... ...
> eth0 ... ... ... ... ... ... ... ...
>
> semoga itu bisa membantu
>
>
> - rony -
>
>
______________________________________________________________________
Utk berhenti langganan kirim email ke [EMAIL PROTECTED]
Sudah cari di arsip? http://www.linux.or.id/milis.php3#arsip-id-linux
Utk info etika diskusi, kirim email kosong ke [EMAIL PROTECTED]
