> kalau di coba pake command
> #dmesg
> keluar :
>
> Console: 16 point font, 400 scans
> Console: colour VGA+ 80x25, 1 virtual console (max 63)
> pcibios_init : BIOS32 Service Directory structure at 0x000fa000
> pcibios_init : BIOS32 Service Directory entry at 0xf3c00
> pcibios_init : PCI BIOS revision 2.10 entry at 0xf42b2
> Probing PCI hardware.
> Warning : Unknown PCI device (e11:4000). Please read
> include/linux/pci.h
> Warning : Unknown PCI device (e11:4000). Please read
> include/linux/pci.h
> Warning : Unknown PCI device (e11:4000). Please read
> include/linux/pci.h
> Warning : Unknown PCI device (e11:4000). Please read
> include/linux/pci.h
> Warning : Unknown PCI device (e11:4000). Please read
> include/linux/pci.h
> Warning : Unknown PCI device (e11:4000). Please read
> include/linux/pci.h
> Warning : Unknown PCI device (e11:4000). Please read
> include/linux/pci.h
> Warning : Unknown PCI device (e11:4000). Please read
> include/linux/pci.h
> Warning : Unknown PCI device (e11:a0f3). Please read
> include/linux/pci.h
> Warning : Unknown PCI device (e11:ae33). Please read
> include/linux/pci.h
> Calibrating delay loop.. ok - 53.25 BogoMIPS
> Memory: 14684k/16384k available (736k kernel code, 384k reserved, 580k
> data)
> Swansea University Computer Society NET3.035 for Linux 2.0
> NET3: Unix domain sockets 0.13 for Linux NET3.035.
> Swansea University Computer Society TCP/IP for NET3.034
> IP Protocols: IGMP, ICMP, UDP, TCP
> VFS: Diskquotas version dquot_5.6.0 initialized
> Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
> Checking 'hlt' instruction... Ok.
> Intel Pentium with F0 0F bug - workaround enabled.
> moving IDT ... ... done
> Linux version 2.0.32 ([EMAIL PROTECTED]) (gcc version 2.7.2.3) #1
> Wed Nov 19 00:46:45 EST 1997
> Starting kswapd v 1.4.2.2
> Serial driver version 4.13 with no serial options enabled
> tty00 at 0x03f8 (irq = 4) is a 16550A
> tty01 at 0x02f8 (irq = 3) is a 16550A
> PS/2 auxiliary pointing device detected -- driver installed.
> Real Time Clock Driver v1.07
> Ramdisk driver initialized : 16 ramdisks of 4096K size
> hda: Maxtor 71629 AP, 1554MB w/128kB Cache, CHS=789/64/63
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a National Semiconductor PC87306
> md driver 0.35 MAX_MD_DEV=4, MAX_REAL=8
> scsi : 0 hosts.
> scsi : detected total.
> Partition check:
> hda: hda1 hda2 < hda5 hda6 >
> VFS: Mounted root (ext2 filesystem) readonly.
> Adding Swap: 32220k swap-space (priority -1)
> Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
> SB 4.13 detected OK (220)
> Installed 0
> YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft
> 1993-1996
> Swansea University Computer Society IPX 0.34 for NET3.035
> IPX Portions Copyright (c) 1995 Caldera, Inc.
> Appletalk 0.17 for Linux NET3.035
>
>
> apa artinya
kernel anda gak support pci hardware ... netcard anda juga gak kedetek
coba kompile ulang kernel anda ...
caranya
1. #cd /usr/src/linux
#make menuconfig
2. pilih option `General Setup --->`
lalu pilih option `Network support` dan `PCI bios support`
[*] Network support
[*] PCI bios support
3.pilih option `Network device support --->`
lalu pilih option `Network device support` dan jenis netcard anda
[*] Network device support
<*> PCI NE 2000 support
<*> NE 2000/NE 1000 ISA support
(jika card anda PCI NE 2000 maka yg ISA gak perlu)
4. simpan konfigurasi yang baru
5. kompile kernel dengan :
#make dep clean
6. setelah selesai reboot komputer anda
semoga itu bisa membantu
- rony -
______________________________________________________________________
Utk berhenti langganan kirim email ke [EMAIL PROTECTED]
Sudah cari di arsip? http://www.linux.or.id/milis.php3#arsip-id-linux
Utk info etika diskusi, kirim email kosong ke [EMAIL PROTECTED]
