Hi Alex The SGM beamline at the CLS does fine work at the Al K-edge. However, I'm not familiar with much Al EXAFS work, you would have to ask the beamline scientist, Tom Regier, about that.
tom.reg...@lightsource.ca Cheers Lachlan > -----Original Message----- > From: ifeffit-boun...@millenia.cars.aps.anl.gov [mailto:ifeffit- > boun...@millenia.cars.aps.anl.gov] On Behalf Of Kompch, Alexander > Sent: October-11-11 8:48 AM > To: XAFS using Ifeffit Analysis > Subject: [Ifeffit] beamline for Al EXAFS > > Dear all, > > for the analysis of the location of the Al-dopant in ZnO, I am looking for > suitable EXAFS beamlines. Dopant concentrations are 1-10%. So far I have > only found ALS 6.3.1 and NSLS X15B. > Can anybody recommend beamlines for Al EXAFS? > > My EXAFS experience is so far limited to the high energy range with signal > detection in transmission (ionization chambers) and fluorescence (multi- > element Ge-detectors). At such low energies as 1.5 keV for Al-K, the sample > needs to be in vacuum, transmission will not work and Ge detectors probably > the same. Does anybody have experience with Al-EXAFS, and can share a > little about setup and what other complications to expect? > > Thank you, > Alex. > _______________________________________________ > Ifeffit mailing list > Ifeffit@millenia.cars.aps.anl.gov > http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit _______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit