On 01/14/2014 04:11 PM, Robert Gordon wrote:
Hi Matt, Shoaib (and Bruce lurking in the luminiferous ether),
I have 8.1 x64 on my laptop and just upgraded to 0.9.19 - clean install.
I can offer some additional details on this problem.
I read in a file in DAthena, extracted the chi(k) and saved the project.
All buttons worked. When the file was read in, 4 mini-graphs displayed,
and I could select k, E, R as desired for full graph.
The second time I run it, reading in the exact same file, only the
energy mini-graph
displays and the E,k and R buttons no longer produce any graphs.
From the clean install, I saved the DAthena.prj. I started DArtemis,
read in the DAthena.prj
file, haven't tried fitting but saved the DArtemis fpj file.
If I try re-opening the fpj file I just saved in DArtemis, DArtemis
crashes,
but re-opening the DAthena prj file after starting DArtemis is not a
problem.
In DAthena, if I go to the appdata/roaming/demeter directory and delete
the demeter.ini file,
DAthena will display all 4 mini-graphs when I open the prj file and the
k,R,E buttons work.
Robert,
If you are inclined to help me with some troubleshooting, I have a request.
If you can recreate the situation where only the energy part of the
quad plot is displayed and the plot buttons stop working, could you
tell me a couple things:
1. What are the values for the plotting ranges in E, k, R, and q?
The reason I ask is that I stumbled upon a situation where Emin,
Emax, kmin, etc all got set to zero (as did a bunch of other
parameters). I could not figure out how to reproduce that
problem, but it would be helpful to know if it happened to
someone else.
2. In the Monitor menu, click on "Show command buffer". In the
"Plot buffer" at the bottom of the window scroll up just a little
bit to where you'll see lines that say things like
plot '/home/bruce/.horae/stash/gp_vdnzxmxl' using 1:2 with
lines ls 1,\
'/home/bruce/.horae/stash/gp_wfaastqg' using 1:2 with
lines ls 2
What I want to know is if the 8 random characters after
"stash/gp_" are the same or different (as in my example here).
In short, I want to know if you have seen some problems I have
observed by not been able to reproduce.
0.9.19 does not appear to be one of my better packaging efforts, alas.
B
I uninstalled and went back to 0.9.18.2. DAthena seems to work - all 4
mini-graphs, and E,k,R work.
DArtemis still opens, reads DAthena.prj but crashes when trying to read
fpj file created under 0.9.18.2.
Going back to the last 0.8.0nn versions, no crashes from Artemis or Athena.
Hope this helps.
-R.
On 1/14/2014 12:38 PM, Matt Newville wrote:
Hi Shoaib,
On Tue, Jan 14, 2014 at 10:46 AM, Shoaib Muhammad
<mshoai...@gmail.com> wrote:
Hi,
I have recently upgraded my computer to Windows 8.1 Pro x64 and after
this
upgrade I can’t run Athena and Artemis. The problem symptoms are:
1- If I use Demeter version 0.9.13, Athena opens but when I try
to open
previously saved file, Athena simply crashes without showing any error.
Artemis also shows similar behavior.
2- By using latest build Demeter 0.9.19, Athena behavior is
slightly
different it opens the files and show the plot. But pressing the E,k,R
buttons does not change the plot. Artemis still crashes by opening any
project file without any error.
I have tried following things, installed in compatibility mode of
Windows7.
Athena worked fine only once after installing in compatibility mode.
Installed in different drives but situations remains the same. Tried
to “run
as Admin” but no improvement.
Installed Demeter on three different computers running Windows 8.1
x64 but
similar behavior is received.
Kindly suggest me some work around because I have to use Demeter on
almost
daily basis. I have attached log file obtained from Demeter 0.9.13
running
under Window 8.1 x64.
Thanks,
Shoaib Muhammad
Department of Energy Science
Sungkyunkwan University
South Korea
_______________________________________________
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
I think you might be in mostly uncharted waters with 64-bit Windows 8.
I have access to many Windows machines, but I don't know of any
64-bit Windows 8.1 machines in our group.
If you're up for it, it might be worth installing demeter from source
from the github repository, following
http://bruceravel.github.io/demeter/pods/installation.pod.html
and asking for help if you get stuck.
I'm sure it would be a great help to others if you did this....
--Matt
_______________________________________________
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
--
Bruce Ravel ------------------------------------ bra...@bnl.gov
National Institute of Standards and Technology
Synchrotron Science Group at NSLS --- Beamlines U7A, X24A, X23A2
Building 535A
Upton NY, 11973
Homepage: http://xafs.org/BruceRavel
Software: https://github.com/bruceravel
_______________________________________________
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
