Right now I connected using client to server, any advice
On Thursday, 7 August 2014 12:43 PM, sivam404 <roopeshsi...@gmail.com> wrote: did you mean from client to client, or cliet to server network?? On Thursday, August 7, 2014 11:18:35 AM UTC+4, John Joseph wrote: >Hi All, >I have been success in setting up a OpenVPN server and I am able to connect to >the server from my clients, but clients cannot ping behind VPN eth1 interfaces >ie from my client I can ping VPNServer eth1 (192.168.50.30), but cannot ping >to the other side, It has to do some setting with route command >see this traceroute results from the client > >joseph@saji:~$ traceroute 192.168.50.30 >traceroute to 192.168.50.30 (192.168.50.30), 30 hops max, 60 byte packets > 1 192.168.50.30 (192.168.50.30) 294.031 ms 294.041 ms 294.050 ms >joseph@saji:~$ > >but when I do trace route to some IP inside the LAN it stops >joseph@saji:~$ traceroute 192.168.50.10 >traceroute to 192.168.50.10 (192.168.50.10), 30 hops max, 60 byte packets > 1 10.28.0.1 (10.28.0.1) 296.795 ms 296.802 ms 296.803 ms > 2 * * * > 3 * * * > 4 * * * > >So it reaches till the VPN server tunnel interface (10.28.0.1) then gets >confused, we have to tell the packet from 10.28.0.1 to go to eth1. I tried >with some route command which all was not correct >Like to get help, details of the network are given below > > > >My VPN Client ip is 192.168.3.101 > >and My VPN Server interfaces are > eth0= connected to the public IP > eth1= interface is 192.168.50.30/24 > > >I did a openvpn connection from my client to OpenVP Server now >my client interfaces are > eth0 = 192.168.3.101 > tun0 = 10.28.0.10 > >My Server interfaces are > eth0 = Public IP > eth1 = 192.168.50.30/24 > tun0 = 10.28.0.1 > >My Server route -n command shows > >[root@reserved-94 openvpn]# route -n >Kernel IP routing table >Destination Gateway Genmask Flags Metric Ref Use Iface >10.10.10.11 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 >10.28.0.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 >XXX.XX.XX.XX 0.0.0.0 255.255.255.252 U 1 0 0 eth0 >10.28.0.0 10.28.0.2 255.255.255.0 UG 0 0 0 tun0 >192.168.50.0 0.0.0.0 255.255.255.0 U 1 0 0 eth1 >0.0.0.0 XXX.XX.XX.XX 0.0.0.0 UG 0 0 0 eth0 > >Advice and help requested >thanks >Joseph John > -- -- "Freedom is the only law". "Freedom Unplugged" http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups "ilug-tvm" group. To control your subscription visit http://groups.google.co.in/group/ilug-tvm/subscribe To post to this group, send email to ilug-tvm@googlegroups.com To unsubscribe from this group, send email to ilug-tvm-unsubscr...@googlegroups.com For details visit the google group page: http://groups.google.com/group/ilug-tvm?hl=en --- You received this message because you are subscribed to the Google Groups "Free Software Users Group, Thiruvananthapuram" group. To unsubscribe from this group and stop receiving emails from it, send an email to ilug-tvm+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
