> Bhaskar Dutta wrote: > >>> On Thursday 08 Jul 2004 1:59 pm, AJ <Anupam Jain> said: > AJ> I'm having problems using the handycam on Mandrake 10.0. With other > USB AJ> storage devices, eg. when using a USB memory stick, an HDD icon pops > up as AJ> soon as I plug it in my USB slot. But nothing happens with the > camcorder. AJ> > AJ> usb 1-1: new full speed USB device using address 2 > AJ> drivers/usb/core/usb.c: registered new driver hiddev > AJ> drivers/usb/core/usb.c: registered new driver hid > AJ> drivers/usb/input/hid-core.c: v2.0:USB HID core driver > AJ> usb 1-1.4: new full speed USB device using address 3 > AJ> usb 1-1.4: device not accepting address 3, error -110 > AJ> usb 1-1.4: new full speed USB device using address 4 > AJ> usb 1-1.4: device not accepting address 4, error -110 > AJ> usb 1-1.4: new full speed USB device using address 5 > AJ> usb 1-1.4: device not accepting address 5, error -110 > AJ> usb 1-1.4: new full speed USB device using address 6 > AJ> usb 1-1.4: device not accepting address 6, error -110 > >usb hub driver is failing. seems to be an interrupt issue. check whether you >are actually getting interrupts from the device.
Umm... How do I do that? >you've given too less information. > >which kernel? >which modules? >which motherboard? >what host controller? >lsusb output >cat /proc/interrupts OK here goes.. Kernel = 2.6.3-4mdk lsmod output Module Size Used by md5 3872 1 ipv6 232352 6 sg 38044 0 sr_mod 17060 0 i810 72032 18 lp 12200 0 maestro3 33832 1 soundcore 9248 2 maestro3 ac97_codec 17804 1 maestro3 af_packet 20520 0 hid 53312 0 raw 7616 1 ide-floppy 18752 0 ide-tape 34864 0 ide-cd 40548 0 cdrom 37184 2 sr_mod,ide-cd floppy 59444 0 nls_iso8859-1 3904 1 nls_cp850 4736 1 vfat 13760 1 fat 45120 1 vfat supermount 37876 1 intel-agp 17372 1 agpgart 31016 3 intel-agp ppa 12296 0 parport_pc 32832 1 imm 12360 0 scsi_mod 114744 4 sg,sr_mod,ppa,imm parport 38952 4 lp,ppa,parport_pc,imm uhci-hcd 29104 0 usbcore 99132 4 hid,uhci-hcd rtc 11576 0 ext3 110376 1 jbd 54328 1 ext3 lsusb output Bus 001 Device 002: ID 0451:2046 Texas Instruments, Inc. TUSB2046 Hub Bus 001 Device 001: ID 0000:0000 cat /proc/interrupts CPU0 0: 945984 XT-PIC timer 1: 479 XT-PIC i8042 2: 0 XT-PIC cascade 5: 0 XT-PIC Allegro 8: 1 XT-PIC rtc 11: 98 XT-PIC uhci_hcd 12: 38634 XT-PIC i8042 14: 75283 XT-PIC ide0 15: 8664 XT-PIC ide1 NMI: 0 LOC: 946033 ERR: 0 MIS: 0 usbview output ------------------------ UHCI Host Controller Manufacturer: Linux 2.6.3-4mdk uhci_hcd Serial Number: 0000:00:1f.2 Speed: 12Mb/s (full) Number of Ports: 2 Bandwidth allocated: 11 / 900 (1%) Total number of interrupt requests: 1 Total number of isochronous requests: 0 USB Version: 1.10 Device Class: 09(hub ) Device Subclass: 00 Device Protocol: 00 Maximum Default Endpoint Size: 8 Number of Configurations: 1 Config Number: 1 Number of Interfaces: 1 Attributes: 40 MaxPower Needed: 0mA Interface Number: 0 Name: hub Alternate Number: 0 Class: 09(hub ) Sub Class: 00 Protocol: 00 Number of Endpoints: 1 Endpoint Address: 81 Direction: in Attribute: 3 Type: Int. Max Packet Size: 2 Interval: 255ms hub Speed: 12Mb/s (full) Number of Ports: 4 USB Version: 1.10 Device Class: 09(hub ) Device Subclass: 00 Device Protocol: 00 Maximum Default Endpoint Size: 8 Number of Configurations: 1 Vendor Id: 0451 Product Id: 2046 Revision Number: 1.25 Config Number: 1 Number of Interfaces: 1 Attributes: e0 MaxPower Needed: 0mA Interface Number: 0 Name: hub Alternate Number: 0 Class: 09(hub ) Sub Class: 00 Protocol: 00 Number of Endpoints: 1 Endpoint Address: 81 Direction: in Attribute: 3 Type: Int. Max Packet Size: 1 Interval: 255ms -------------------------------- Thanks in advance for any help - AJ _______________________________________________ ilugd mailinglist -- [EMAIL PROTECTED] http://frodo.hserus.net/mailman/listinfo/ilugd Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi http://www.mail-archive.com/[EMAIL PROTECTED]/