Output is same as this http://www.plug.org.in/pipermail/plug-mail/2006-May/000283.ht ml
On 14/11/06, Sudev Barar <[EMAIL PROTECTED]> wrote: > On 14/11/06, Frederick FN Noronha <[EMAIL PROTECTED]> wrote: > > Sudev, > > Please advice... attached is a PDF which explains the issue (not sure > > if it's for ZTE too). FN > > FN > > Can we keep this on the list? Others can ship in and also help? > > The procedure described in the way to go. That is why I have been > asking out out of /var/log/messages (when card is inserted and then > removed) to first determine if the module needs to be loaded or is > already getting loaded and device assigned. > > Once we get the device assigned (/dev/ttyS0 in the article) then we > move on to modem initialisation strings. Usually "atz" is sufficient > but this may also involve extended strings just like the article > describes for making voice calls. Or as Spoonmans post earlier > suggested. Nokia site has a pretty comprehensive document covering lot > of extended init string syntaxes. > > Some getting the feet wet issue to be overcome but likely chances are > good to get this working. If any one at ILUGD has ATZ card and is > willing to bring t to next meeting we try to carck this but till then > we will have to make a attempt on doing this with emails. > -- > Regards, > Sudev Barar > -- FN 9822122436 +91-832-240-9490 (phone calls after 1 pm please) Free the airwaves... for India's sake (see the article at the URL below) [http://www.tehelka.com/home/20061111/20061111.asp?filename=18.jpg] _______________________________________________ ilugd mailinglist -- ilugd@lists.linux-delhi.org http://frodo.hserus.net/mailman/listinfo/ilugd Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
