which hardware are you using? In case you are using the new hardware from Epivally, you need to perform an unmount first before using the hardware as modem. It should be mounted as a cdrom drive. unmount it and your hardware will be accessible as modem "umount /dev/sr1" should do it (please confirm if its mounted as sr1 or someother thing). after that if you follow the documentation, you should be good
On Thu, Oct 8, 2009 at 8:55 PM, Anil Seth <seth.a...@gmail.com> wrote: > On Thu, Oct 8, 2009 at 7:01 PM, <ilugd-requ...@lists.linux-delhi.org> > wrote: > > I need to connect Tata Indicom Photon + internet on Centos 5.3 > > > > Dont know how to do that, reading the posts here i found i need to > execute > > the command wvdial. > > > > [r...@localhost ~]# wvdial > > --> WvDial: Internet dialer version 1.54.0 > > --> Warning: section [Dialer Defaults] does not exist in wvdial.conf. > > --> Cannot open /dev/modem: No such file or directory > > --> Cannot open /dev/modem: No such file or directory > > --> Cannot open /dev/modem: No such file or directory > > > > With the earlier USB stick, the wvdial conf file was: > > [Modem0] > Modem = /dev/ttyACM0 > Baud = 115200 > SetVolume = 0 > Dial Command = ATDT > Init1 = ATZ > Init3 = ATM0 > FlowControl = CRTSCTS > [Dialer TataIndicom] > Username = internet > Password = internet > Phone = #777 > Stupid Mode = 1 > Init1 = ATZ > Inherits = Modem0 > > Regards > Anil > > _______________________________________________ > ilugd mailinglist -- ilugd@lists.linux-delhi.org > http://frodo.hserus.net/mailman/listinfo/ilugd > Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi > http://www.mail-archive.com/ilugd@lists.linux-delhi.org/ > _______________________________________________ ilugd mailinglist -- ilugd@lists.linux-delhi.org http://frodo.hserus.net/mailman/listinfo/ilugd Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
