Joe,

You need to stop/start the SMTP service for any change to the SMTP Security to
take effect!

Daniel Donnelly
Ipswitch Technical Support
________________________________________________________
See our Knowledge Base at http://support.ipswitch.com/kb
URL for List Servers: http://www.ipswitch.com/Support/mailing-lists.html


In reply to 20 Jul message from [EMAIL PROTECTED]:


>SMTP security settings are currently set to "relay all mail" - when I
>first looked at them they were set to "relay mail only from:" with a
box
>for ip addresses that was empty - I will check the ipswitch board as
>sudeep suggested. 

>Thanks for your response.
>  ----- Original Message ----- 
>  From: ## Dusty Carden 
>  To: [EMAIL PROTECTED] 
>  Sent: Monday, July 19, 1999 10:42 PM
>  Subject: Re: [IMail Forum] New user setup questions 


>  Your MX records look okay doing a dig on them.  The error 
>  you are getting below is as if the IP address you are posting 
>  from is not listed in the SMTP Security settings as allowed 
>  to relay.

>  Check that first.

>  Dusty
>    ----- Original Message ----- 
>    From: Joe Halloran 
>    To: [EMAIL PROTECTED] 
>    Sent: Monday, July 19, 1999 9:25 PM
>    Subject: [IMail Forum] New user setup questions 


>    Pardon my greenness - we just got our dsl connection and I am now
>trying to get imail to talk to the rest of the world.  Current set up is
>as
follows: 
>     
>    We are using our isp's dns servers.  The isp has filled out the mx
>record at his place to point to our internal ten net ip via our router -
>I
think the router does the final address translation to the ten net ip.
>When I try to send mail via th e imail smtp server I get this error:
>     
>    "The message could not be sent.....rejected by the server.  The
>rejected email address was ................, Server Response: 550 not
>local host.... not a gateway........" 
>     
>    If I send mail to the imail server via the isp's smtp server it
does
>come back in - I need to test whether it will come in from another isp
>(send me a message at [EMAIL PROTECTED] if you want to help me
>test!!). 
>     
>    Some test messages that I sent earlier seem to have gotten thru -
at
>least the header reports that the targer received it from our imail
smtp
>server.....but now all is error. 
>     
>    So - any leads, hints, clues or outright solutions much appreciated!
>  
>    Joe Halloran
>     

>     




Please visit http://www.ipswitch.com/support/mailing-lists.html 
to be removed from this list.

Reply via email to