Mark,
Do you have a conduit command in the PIX that directs traffic on Port
25? I'm assuming that you have the mailserver on the DMZ??? You could try:
conduit permit tcp host xxx.xxx.xxx.xxx eq smtp any
The xxx.xxx.xxx.xxx is the IP of the mail server. You could also use a
conduit command for pop3 with the same parameters as above. I hope this can
help.
Jim
-----Original Message-----
From: Mark A. Murray <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Thursday, August 17, 2000 11:06 AM
Subject: [IMail Forum] test email to user@ip doesn't work
>Hello,
> I have a test server running IMail and it's behind a Pix Firewall. I
>wanted to test the email by sending a message to user@ip of the email
>server, but I can't get it to work. (There are no MX records for this
>server yet.)
> I called techsupport and talked to Chris. He suggested to disable
>smtp on the firewall or use a gateway setting in IMail.
> I tried setting the gateway to the internal IP of our firewall, but
>it times-out when trying to send an email. I'll paste the log file
>below. Our IP for the mail server is 192.204.26.2 and I was connected
>to a dial up when I sent the messages. I don't understand why it
>errored out on invalid user either.
>
>
>0000817 100651 127.0.0.1 SMTPD (002000E0) [63.10.64.11] HELO
>tissueinformatics.com
>20000817 100651 127.0.0.1 SMTPD (002000E0) [63.10.64.11] MAIL
>FROM:<[EMAIL PROTECTED]>
>20000817 100652 127.0.0.1 SMTPD (002000E0) [63.10.64.11] RCPT
>TO:<[EMAIL PROTECTED]>
>20000817 100652 127.0.0.1 SMTPD (002000E0) [63.10.64.11] ERR
>cell.tissueinformatics.com invalid user <[EMAIL PROTECTED]
>20000817 100722 127.0.0.1 SMTPD (028C012C) [192.168.4.2] connect
>192.168.4.2 port 1793
>20000817 100823 127.0.0.1 SMTPD (028F012C) [192.168.4.2] connect
>192.168.4.2 port 1812
>20000817 100837 127.0.0.1 SMTPD (002300E0) [192.168.4.2] connect
>63.10.64.11 port 1074
>20000817 100837 127.0.0.1 SMTPD (002300E0) [63.10.64.11] HELO
>tissueinformatics.com
>20000817 100837 127.0.0.1 SMTPD (002300E0) [63.10.64.11] MAIL
>FROM:<[EMAIL PROTECTED]>
>20000817 100837 127.0.0.1 SMTPD (002300E0) [63.10.64.11] RCPT
>TO:<[EMAIL PROTECTED]>
>20000817 100837 127.0.0.1 SMTPD (002300E0) [63.10.64.11] ERR
>cell.tissueinformatics.com invalid user <[EMAIL PROTECTED]
>20000817 100925 127.0.0.1 SMTPD (0292012C) [192.168.4.2] connect
>192.168.4.2 port 1838
>20000817 101010 127.0.0.1 SMTPD (0003006C) server starting on port
>25 of cell.tissueinformatics.com
>20000817 101023 127.0.0.1 SMTPD (000103F2) [192.168.4.2] connect
>63.10.64.11 port 1075
>20000817 101024 127.0.0.1 SMTPD (000103F2) [63.10.64.11] HELO
>tissueinformatics.com
>20000817 101024 127.0.0.1 SMTPD (000103F2) [63.10.64.11] MAIL
>FROM:<[EMAIL PROTECTED]>
>20000817 101024 127.0.0.1 SMTPD (000103F2) [63.10.64.11] RCPT
>TO:<[EMAIL PROTECTED]>
>20000817 101025 127.0.0.1 SMTPD (000103F2) [63.10.64.11]
>D:\IMail\spool\Df2503f2.SMD 535
>20000817 101025 127.0.0.1 SMTP (282) processing
>D:\IMail\spool\Qf2503f2.SMD
>20000817 101025 127.0.0.1 SMTP (282) Trying 192.168.1.1 (1)
>20000817 101026 127.0.0.1 SMTPD (003C0114) [192.168.4.2] connect
>192.168.4.2 port 1866
>20000817 101053 127.0.0.1 SMTPD (0004006C) server starting on port
>25 of cell.tissueinformatics.com
>20000817 101114 127.0.0.1 SMTP (282) Connect fail 192.168.1.1
>[192.168.1.1]: connection timed out
>20000817 101114 127.0.0.1 SMTP (282) requeuing
>D:\IMail\spool\Qf2503f2.SMP R0 T1
>20000817 101114 127.0.0.1 SMTP (282) finished
>D:\IMail\spool\Qf2503f2.SMP status=3
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/imail_forum%40list.ipswitch.com/
