We have no problems with Interscan. We are currently using v. 3.53 and are considering the update to 3.55. Did you begin you open relay problems begin before 3.55 or is that the 1st version you installed?
On the advanced tab we have checked "Accept inbound mail addressed only to..." and have in the field: "mail.ourdomain.com, ourdomain.com, [ip.ip.ip.ip], virtualdomain.com" This has proven to be effective aginst relaying based on ORDB's and other's tests. FYI, in case you didn't know, there is a configuration entry that allows blocking of included attachments and there is a configuration that forces IS to scan the whole body of an email rather than just the attachments. We found that IS was missing some of the latest viruses because it didn't recognize that there was an attachment. Our realtime AV scanner was picking them up(and killing them) in the spool directory of Imail. Douglas Traylor MIS Department Harbison-Fischer Mfg Co. (817)297-2211 x210 ----- Original Message ----- From: "H Jones" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, April 21, 2004 7:29 PM Subject: [IMail Forum] OT - Interscan Viruswall and IMail 8.1 > Just wondering if anyone else out there has had problems locking down the > relay in InterScan VirusWall 3.55 and IMail 8.1 on the same machine. IS has > a place to enter domains to "only accept inbound mail addressed to the > following domains", but even if I put FQDN there, it will still allow relay. > If I turn off relay in IMail, then nothing external goes because of course > IS can't auth to SMTP, and since they are sharing the same IP, relay for > addresses is basically an open relay. I've got a ticket in with Interscan > about it, but figured this may be a faster approach. > > Thanks for any suggestions > -HJ > > To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html List Archive: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/
