Are you using the null modem cable that was supplied with the switch?
_____ Pat Mason Senior Network Specialist R & D Industries, Inc. Watts Line: (800) 659-3529 x110 Phone: (712) 338-2999 Fax: (712) 338-2990 Email: [EMAIL PROTECTED] Thinix - Thin Client Solutions <http://www.thinix.com> Computer & Network Division <http://www.rdi1.com/cpulan> AudioEngineering.com - Excellence By Design <http://www.audioengineering.com> _____ _____ From: Mueller, Mitch [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 21, 2008 8:48 AM To: info-tech@aea8.k12.ia.us Subject: RE: [info-tech] Hyperterminal help But when I try setting the bits per sec to 9600 I can read what is coming up on the screen. But when I hit the enter key twice when it tells me I get no keyboard response. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mason, Pat Sent: Tuesday, October 21, 2008 8:42 AM To: info-tech@aea8.k12.ia.us Subject: RE: [info-tech] Hyperterminal help Mitch, You need to configure your HyperTerminal session with the following settings, Bits per second - 19200 Data bits - 8 Parity - None Stop bits - 1 Flow control - Xon/Xoff After you have established your HyperTerminal session to the HP Switch hit the Enter key twice. _____ Pat Mason Senior Network Specialist R & D Industries, Inc. Watts Line: (800) 659-3529 x110 Phone: (712) 338-2999 Fax: (712) 338-2990 Email: [EMAIL PROTECTED] Thinix - Thin Client Solutions <http://www.thinix.com> Computer & Network Division <http://www.rdi1.com/cpulan> AudioEngineering.com - Excellence By Design <http://www.audioengineering.com> _____ _____ From: Mueller, Mitch [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 21, 2008 8:33 AM To: info-tech@aea8.k12.ia.us Subject: [info-tech] Hyperterminal help I'm looking for help with HyperTerminal. I'm trying to connect to our H.P. 4208vl switches through the serial port and I'm not have much luck at it. I can't get any keyboard response when it boots up. Anyone got any help out there please let me know. thanks Mitch Mueller
<<image001.jpg>>