Hi...
I've done a live upgrade from SXDE snv_79a to SXCE b89, but booting the
new b89 just hangs. With "-kv" applied during boot, I get as far as:
PCIE-device: pci8086,3510 at 0, pcie_pci9
pcie_pci9 is /pci at 0,0/pci8086,25f7 at 2/pci8086,3500 at 0/pci8086,3510
at 0
but no response after that. That last line points to the boot slice of
the new b89 install. If I reboot back into b79, everything comes up
normal again.
I had one error during the upgrade to b89:
Doing pkgadd of SUNWscmu to /
5722 blocks
ncall 224
Segmentation Fault - core dumped
Segmentation Fault - core dumped
pkgadd: ERROR: postinstall script did not complete successfully
Installation of <SUNWscmu> failed.
pkgadd return code = 1
Could this somehow be the cause of the problem? I don't have any
StorageTek hardware on my system. My system is 2 SATA drives in a mirror
off an LSI SAS3041E-R controller for a ufs OS device and 10 SATA drives
running ZFS RAIDz6. I'm pretty-well stumped here and unable to upgrade.
Can anyone help?
Thanks...
Art
Arthur A. Person
Research Assistant, System Administrator
Penn State Department of Meteorology
email: person at meteo.psu.edu, phone: 814-863-1563
