Does anyone know if SXDE and SXCE are incompatible for upgrades? I.e. am
I not allowed to do an upgrade from SXDE to SXCE but rather must do a
fresh install from the SXCE iso?
Thanks...
Art
On Fri, 30 May 2008, Arthur Person wrote:
> Hi...
>
> I've done a live upgrade from SXDE snv_79a to SXCE b89, but booting the
> new b89 just hangs. With "-kv" applied during boot, I get as far as:
>
> PCIE-device: pci8086,3510 at 0, pcie_pci9
> pcie_pci9 is /pci at 0,0/pci8086,25f7 at 2/pci8086,3500 at 0/pci8086,3510
> at 0
>
> but no response after that. That last line points to the boot slice of
> the new b89 install. If I reboot back into b79, everything comes up
> normal again.
>
> I had one error during the upgrade to b89:
>
> Doing pkgadd of SUNWscmu to /
> 5722 blocks
> ncall 224
> Segmentation Fault - core dumped
> Segmentation Fault - core dumped
> pkgadd: ERROR: postinstall script did not complete successfully
>
> Installation of <SUNWscmu> failed.
> pkgadd return code = 1
>
> Could this somehow be the cause of the problem? I don't have any
> StorageTek hardware on my system. My system is 2 SATA drives in a mirror
> off an LSI SAS3041E-R controller for a ufs OS device and 10 SATA drives
> running ZFS RAIDz6. I'm pretty-well stumped here and unable to upgrade.
> Can anyone help?
>
> Thanks...
>
> Art
>
> Arthur A. Person
> Research Assistant, System Administrator
> Penn State Department of Meteorology
> email: person at meteo.psu.edu, phone: 814-863-1563
> _______________________________________________
> install-discuss mailing list
> install-discuss at opensolaris.org
> http://mail.opensolaris.org/mailman/listinfo/install-discuss
>
>
Arthur A. Person
Research Assistant, System Administrator
Penn State Department of Meteorology
email: person at meteo.psu.edu, phone: 814-863-1563
