This sounds extremely similar to 6346353. Does patch 118855-19 deliver "/lib/svc/method/devices-local" ? If it does, its overwriting the miniroot version of the file. (See an unpatched miniroot for what the miniroot version looks like).
-ethan Sarah Jelinek wrote: > > > ------------------------------------------------------------------------ > > Subject: > RE:devfsadm message during miniroot boot > From: > Sarah Jelinek <Sarah.Jelinek at Sun.COM> > Date: > Tue, 03 Oct 2006 14:49:23 -0600 > To: > Jill.Manfield at Sun.COM, Paul.Buckley at Sun.COM > > To: > Jill.Manfield at Sun.COM, Paul.Buckley at Sun.COM > > > Hi Jill and Paul, > > I am the install POC for the week and I just saw this email. The error > message you are seeing indicates that someone is trying to run devfsadm > on a read only root fs. During the install process we use /tmp/dev to do > our work, and normally would not see this happen. I notice that you said > you applied patch 118855-19 to the miniroot. How exactly did you do this? > > Also, I note that there is a begin.sh script being run, is there any > devfsadm calls in this script? > > Have you tried to run this jumpstart install with the base s10u2 > miniroot, without the patch data? If so, was this message present as well? > > Yes, this message is a concern, so I need a bit more data to see how we > got there. > > thanks, > sarah > **** > > > >> Can anyone answer this please please???? My customer has been waiting >> for an answer and is getting antsy to whether this error could be >> ignored as benign. Please read Paul's description thanks! He is a >> top account Time Warner customer and his deployment is being held up >> by my response. >> =========================================================================== >> >> S U N M I C R O S Y S T E M S I N C. >> Jill Manfield - TSE-X64 Support Team >> email: jill.manfield at sun.com >> phone: (800)USA-4SUN (Reference your case #) >> address: 1617 Southwood Drive Nashua,NH 03063 >> mailstop: NSH-01- B287 Mgr: Dave O'Connor: >> dave.oconnor at sun.com >> Submit, View and Update tickets at >> http://www.sun.com/service/online >> >> This email may contain confidential and privileged material for the >> sole use of the intended recipient. Any review or distribution by >> others is strictly prohibited. If you are not the intended recipient >> please contact the sender and delete all copies. >> ============================================================================= >> >> >> >> ----- Original Message ----- >> From: Paul Buckley <Paul.Buckley at Sun.COM> >> Date: Thursday, September 28, 2006 11:27 am >> Subject: Re: devfsadm message during miniroot boot >> To: install-interest at sun.com >> Cc: Jill Manfield <Jill.Manfield at Sun.COM> >> >> >> >>> > Can some please give a quick verification if the message encountered >>> > during the miniroot boot will have any effect on the final > >>> installationafter flash deployment? >>> > > Thanks, >>> > > Paul >>> > > Paul Buckley wrote: >>> > >>> >>>> > >Hello, >>>> > > >>>> > >Any reason that the following message during the boot process to >>>> >>> >>> > miniroot during an jumpstart install would effect the final install >>> > environment. This is just a concern not a problem that we know of. >>> > Deployment of the flash archive is successful. >>> >>> >>>> > > >>>> > >--------------------- >>>> > >Custom JumpStart >>>> > >Configuring devices. >>>> > >devfsadm: mkdir failed for /dev 0x1ed: Read-only file system >>>> > >--------------------- >>>> > > >>>> > >This is a s10u2 miniroot (x86) patched with 118855-15. >>>> > > >>>> > >Thanks, Paul >>>> > > >>>> > > >>>> > > >>>> > > >>>> > >Console boot text follows: >>>> > > >>>> > > >>>> > > >>>> > >module misc/krtld: text at [0xfe873690, 0xfe881827] data at >>> >>> > 0xfec40a38>module /kernel/genunix: text at [0xfe881828, 0xfe98cc27] >>> > data at >>> >>> >>>> > >0xfec45a60 >>>> > >SunOS Release 5.10 Version Generic_118855-15 32-bit >>>> > >Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved. >>>> > >Use is subject to license terms. >>>> > >features: >>>> > >>>> >1067fdf<cpuid,sse3,nx,sse2,sse,sep,pat,cx8,pae,mca,mmx,cmov,pge,mtrr,msr >>>> >>>> > >,tsc,lgpg> >>>> > >Using default device instance data >>>> > >cpuid 0: initialized cpumod: cpu.AuthenticAMD.15 >>>> > >mem = 2096696K (0x7ff8e000) >>>> > >root nexus = i86pc >>>> > >pseudo0 at root >>>> > >pseudo0 is /pseudo >>>> > >scsi_vhci0 at root >>>> > >scsi_vhci0 is /scsi_vhci >>>> > >isa0 at root >>>> > >ramdisk0 at root >>>> > >ramdisk0 is /ramdisk >>>> > >SMBIOS v2.3 loaded (3017 bytes)SMI polling disabled in favor of >>>> >>> >>> > Solaris>Fault Management for AMD Processors >>> >>> >>>> > >pseudo-device: dld0 >>>> > >dld0 is /pseudo/dld at 0 >>>> > >pci0 at root: space 0 offset 0 >>>> > >pci0 is /pci at 0,0 >>>> > >PCI-device: pci1022,7450 at 1, pci_pci0 >>>> > >pci_pci0 is /pci at 0,0/pci1022,7450 at 1 >>>> > >Ethernet address = 0:14:4f:1:93:dc >>>> > >PCI-device: pci1022,7460 at 6, pci_pci2 >>>> > >pci_pci2 is /pci at 0,0/pci1022,7460 at 6 >>>> > >ISA-device: asy0 >>>> > >asy0 is /isa/asy at 1,3f8 >>>> > >8042 device: keyboard at 0, kb8042 # 0 >>>> > >kb80420 is /isa/i8042 at 1,60/keyboard at 0 >>>> > >PCI-device: pci1022,7464 at 0, ohci0 >>>> > >ohci0 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0 >>>> > >PCI-device: pci1022,7464 at 0,1, ohci1 >>>> > >ohci1 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1 >>>> > >cpu0: x86 (AuthenticAMD family 15 model 37 step 1 clock 2792 MHz) >>>> > >cpu0: AMD Opteron(tm) Processor 254 >>>> > >cpu1: x86 (AuthenticAMD family 15 model 37 step 1 clock 2792 MHz) >>>> > >cpu1: AMD Opteron(tm) Processor 254 >>>> > >cpuid 1: initialized cpumod: cpu.AuthenticAMD.15 >>>> > >pci1 at root: isa 0x0 >>>> > >pci1 is /pci at 1,0 >>>> > >Configuring devices. >>>> > >USB 1.10 device (usb46b,ff10) operating at full speed (USB 1.x) >>>> on >>> >>> > USB>1.10 root hub: device at 3, usb_mid0 at bus address 2 >>> >>> >>>> > > American Megatrends Inc. Virtual Keyboard and Mouse >>>> > >usb_mid0 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0/device at 3 >>>> > >/pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0/device at 3 (usb_mid0) >>>> > >online >>>> > >USB 1.10 interface (usbif46b,ff10.config1.0) operating at full speed >>>> > >(USB 1.x) on USB 1.10 root hub: keyboard at 0, hid0 at bus address 2 >>>> > > American Megatrends Inc. Virtual Keyboard and Mouse >>>> > >hid0 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0/device at >>>> > >3/keyboard at 0 >>>> > >/pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0/device at 3/keyboard at >>>> > >0 (hid0) >>>> >>> >>> > online>USB 1.10 interface (usbif46b,ff10.config1.1) operating at > >>> full speed >>> >>> >>>> > >(USB 1.x) on USB 1.10 root hub: mouse at 1, hid1 at bus address 2 >>>> > > American Megatrends Inc. Virtual Keyboard and Mouse >>>> > >hid1 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0/device at >>>> > >3/mouse at 1 >>>> > >/pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0/device at 3/mouse at 1 >>>> > >(hid1) >>>> online >>>> > >USB 1.10 device (usb46b,ff20) operating at full speed (USB 1.x) >>>> on >>> >>> > USB>1.10 root hub: storage at 1, scsa2usb0 at bus address 2 >>> >>> >>>> > > American Megatrends Inc. Virtual Cdrom Device >>>> > >scsa2usb0 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage >>>> > >at 1 >>>> > >/pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage at 1 >>>> > >(scsa2usb0) >>>> online >>>> > >USB 1.10 device (usb46b,ff40) operating at full speed (USB 1.x) >>>> on >>> >>> > USB>1.10 root hub: storage at 2, scsa2usb1 at bus address 3 >>> >>> >>>> > > American Megatrends Inc. Virtual Floppy Device >>>> > >scsa2usb1 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage >>>> > >at 2 >>>> > >/pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage at 2 >>>> > >(scsa2usb1) >>>> online >>>> > >USB 1.10 device (usb3eb,3301) operating at full speed (USB 1.x) >>>> on >>> >>> > USB>1.10 root hub: hub at 3, hubd0 at bus address 4 >>> >>> >>>> > >hubd0 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/hub at 3 >>>> > >/pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/hub at 3 (hubd0) >>>> > >online >>>> > >sd0 at scsa2usb0: target 0 lun 0 >>>> > >sd0 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage at >>>> > >1/disk at 0,0 >>>> > >/pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage at 1/disk at >>>> > >0,0 (sd0) >>>> >>> >>> > online>sd1 at scsa2usb1: target 0 lun 0 >>> >>> >>>> > >sd1 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage at >>>> > >2/disk at 0,0 >>>> > >/pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage at 2/disk at >>>> > >0,0 (sd1) >>>> >>> >>> > online>pseudo-device: devinfo0 >>> >>> >>>> > >devinfo0 is /pseudo/devinfo at 0 >>>> > >xsvc0 at root >>>> > >xsvc0 is /xsvc >>>> > >PCI-device: pci1022,7450 at 2, pci_pci1 >>>> > >pci_pci1 is /pci at 0,0/pci1022,7450 at 2 >>>> > >PCI-device: pci1022,7450 at 1, pci_pci3 >>>> > >pseudo-device: pseudo1 >>>> > >pci_pci3 is /pci at 1,0/pci1022,7450 at 1 >>>> > >pseudo1 is /pseudo/zconsnex at 1 >>>> > >PCI-device: pci1022,7450 at 2, pci_pci4 >>>> > >pci_pci4 is /pci at 1,0/pci1022,7450 at 2 >>>> > >/pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3 (mpt0): >>>> > > Rev. 2 LSI, Inc. 1064 found. >>>> > >/pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3 (mpt0): >>>> > > mpt0 supports power management. >>>> > > ATAPI device at targ 0, lun 0 lastlun 0x0 >>>> > > model DV-28SL >>>> > > ATA/ATAPI-5 supported, majver 0x3c minver 0x0 >>>> > >/pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3 (mpt0): >>>> > > mpt0 Firmware version v1.4.0.0 (IR) >>>> > >/pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3 (mpt0): >>>> > > mpt0: IOC Operational. >>>> > >PCI-device: ide at 0, ata0 >>>> > >ata0 is /pci at 0,0/pci-ide at 7,1/ide at 0 >>>> > > ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" >>>> > >property >>>> > > PIO mode 4 selected >>>> > > ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" >>>> > >property >>>> > > PIO mode 4 selected >>>> > > ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" >>>> > >property >>>> > > PIO mode 4 selected >>>> > >pseudo-device: fssnap0 >>>> > >fssnap0 is /pseudo/fssnap at 0 >>>> > >pseudo-device: ramdisk1024 >>>> > >ramdisk1024 is /pseudo/ramdisk at 1024 >>>> > >pseudo-device: fcp0 >>>> > >fcp0 is /pseudo/fcp at 0 >>>> > >pseudo-device: winlock0 >>>> > >winlock0 is /pseudo/winlock at 0 >>>> > >pseudo-device: fcsm0 >>>> > >fcsm0 is /pseudo/fcsm at 0 >>>> > >pseudo-device: llc10 >>>> > >llc10 is /pseudo/llc1 at 0 >>>> > >pseudo-device: lofi0 >>>> > >lofi0 is /pseudo/lofi at 0 >>>> > >pseudo-device: pool0 >>>> > >pool0 is /pseudo/pool at 0 >>>> > >sd2 at ata0: target 0 lun 0 >>>> > >sd2 is /pci at 0,0/pci-ide at 7,1/ide at 0/sd at 0,0 >>>> > >pseudo-device: bmc0 >>>> > >bmc0 is /pseudo/bmc at 0 >>>> > >pseudo-device: zfs0 >>>> > >zfs0 is /pseudo/zfs at 0 >>>> > >pseudo-device: power0 >>>> > >power0 is /pseudo/power at 0 >>>> > >/pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3 (mpt0): >>>> > > Volume 1 is optimal >>>> > >/pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3 (mpt0): >>>> > > Volume 0 is optimal >>>> > >PCI-device: pci1000,3060 at 3, mpt0 >>>> > >mpt0 is /pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3 >>>> > >sd3 at mpt0: target 0 lun 0 >>>> > >sd3 is /pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3/sd at 0,0 >>>> > >sd4 at mpt0: target 1 lun 0 >>>> > >sd4 is /pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3/sd at 1,0 >>>> > >Custom JumpStart >>>> > >Configuring devices. >>>> > >devfsadm: mkdir failed for /dev 0x1ed: Read-only file system >>>> > > ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" >>>> > >property >>>> > > PIO mode 4 selected >>>> > > ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" >>>> > >property >>>> > > PIO mode 4 selected >>>> > > ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" >>>> > >property >>>> > > PIO mode 4 selected >>>> > >Beginning system identification... >>>> > >Searching for configuration file(s)... >>>> > >Using sysid configuration file >>>> > >65.185.233.84:/autocfg/clients/0193dc/sysidcfg >>>> > >Search complete. >>>> > >Discovering additional network configuration... >>>> > >Completing system identification... >>>> > >Starting remote procedure call (RPC) services: done. >>>> > >System identification complete. >>>> > >Starting Solaris installation program... >>>> > >Searching for JumpStart directory... >>>> > >Using rules.ok from 65.185.233.84:/autocfg/clients/0193dc. >>>> > >Checking rules.ok file... >>>> > >Using begin script: begin.sh >>>> > >Using derived profile: begin.sh >>>> > >Using finish script: finish.sh >>>> > >/sbin/dhcpinfo: primary interface requested but no primary >>> >>> > interface is >>> >>> >>>> > >set >>>> > >Executing JumpStart preinstall phase... >>>> > >Executing begin script "begin.sh"... >>>> > >mounting filesystems from 65.185.233.84... >>>> > >mounting complete >>>> > >INFO Jumpstart.Global - starting telnet daemon... >>>> > >INFO Jumpstart.Global - started telnet daemon >>>> > >INFO Jumpstart.Global.Network - preparing chroot area for >>> >>> > ifspeed...>INFO Jumpstart.Global.Network - current interface states: >>> >>> >>>> > >e1000g0: up, autonegotiated 100/half >>>> > > capabilities: auto 1000/full 100/full 100/half 10/full 10/half >>>> > > link partner capabilities: auto 100/half >>>> > >e1000g1: down >>>> > > capabilities: auto 1000/full 100/full 100/half 10/full 10/half >>>> > >e1000g2: down >>>> > > capabilities: auto 1000/full 100/full 100/half 10/full 10/half >>>> > >e1000g3: down >>>> > > capabilities: auto 1000/full 100/full 100/half 10/full 10/half >>>> > >INFO Jumpstart.Global.Network - setting speed for e1000g0 (best- >>>> >>> >>> > guess)>INFO Jumpstart.Global.Network - set speed completed >>> >>> >>>> > >INFO Jumpstart.Global.Profile - Determining Server Hardware type >>>> > >INFO Jumpstart.Global.Profile - RAID relationship for c0t0d0 >>> >>> > already>established >>> >>> >>>> > >INFO Jumpstart.Global.Profile - creating Solaris partition on >>>> >>> >>> > c0t0d0>INFO Jumpstart.Global.Profile - rereading disk information >>> >>> >>>> > >INFO Jumpstart.Global.Profile - creating Solaris label on c0t0d0 >>>> > >INFO Jumpstart.Global.Profile - constructed derived profile >>> >>> > using root >>> >>> >>>> > >disk c0t0d0 >>>> > >INFO Jumpstart.Global.Profile - decided to use 4196 megabytes >>>> of >>> >>> > swap>Begin script begin.sh execution completed. >>> >>> >>>> > >Searching for SolStart directory... >>>> > >Checking rules.ok file... >>>> > >Using begin script: install_begin >>>> > >Using finish script: patch_finish >>>> > >/sbin/dhcpinfo: primary interface requested but no primary >>> >>> > interface is >>> >>> >>>> > >set >>>> > >Executing SolStart preinstall phase... >>>> > >Executing begin script "install_begin"... >>>> > >Begin script install_begin execution completed. >>>> > > >>>> > >Processing profile >>>> > > >>>> > > >>>> > > > > >>>> >>> >>> > > > > > > > ------------------------------------------------------------------------ > > _______________________________________________ > install-discuss mailing list > install-discuss at opensolaris.org > http://opensolaris.org/mailman/listinfo/install-discuss
