Ethan Quach wrote: > This sounds extremely similar to 6346353. > > Does patch 118855-19 deliver "/lib/svc/method/devices-local" ? If it > does, its overwriting the miniroot version of the file. (See an > unpatched miniroot for what the miniroot version looks like). It does deliver /lib/svc/method/devices-local. So, it sounds like the same bug.
thanks, sarah > > > -ethan > > > Sarah Jelinek wrote: >> >> >> ------------------------------------------------------------------------ >> >> Subject: >> RE:devfsadm message during miniroot boot >> From: >> Sarah Jelinek <Sarah.Jelinek at Sun.COM> >> Date: >> Tue, 03 Oct 2006 14:49:23 -0600 >> To: >> Jill.Manfield at Sun.COM, Paul.Buckley at Sun.COM >> >> To: >> Jill.Manfield at Sun.COM, Paul.Buckley at Sun.COM >> >> >> Hi Jill and Paul, >> >> I am the install POC for the week and I just saw this email. The >> error message you are seeing indicates that someone is trying to run >> devfsadm on a read only root fs. During the install process we use >> /tmp/dev to do our work, and normally would not see this happen. I >> notice that you said you applied patch 118855-19 to the miniroot. How >> exactly did you do this? >> >> Also, I note that there is a begin.sh script being run, is there any >> devfsadm calls in this script? >> >> Have you tried to run this jumpstart install with the base s10u2 >> miniroot, without the patch data? If so, was this message present as >> well? >> >> Yes, this message is a concern, so I need a bit more data to see how >> we got there. >> >> thanks, >> sarah >> **** >> >> >> >>> Can anyone answer this please please???? My customer has been >>> waiting for an answer and is getting antsy to whether this error >>> could be ignored as benign. Please read Paul's description >>> thanks! He is a top account Time Warner customer and his deployment >>> is being held up by my response. >>> =========================================================================== >>> >>> S U N M I C R O S Y S T E M S I N C. >>> Jill Manfield - TSE-X64 Support Team >>> email: jill.manfield at sun.com >>> phone: (800)USA-4SUN (Reference your case #) >>> address: 1617 Southwood Drive Nashua,NH 03063 >>> mailstop: NSH-01- B287 Mgr: Dave O'Connor: >>> dave.oconnor at sun.com >>> Submit, View and Update tickets at >>> http://www.sun.com/service/online >>> >>> This email may contain confidential and privileged material for the >>> sole use of the intended recipient. Any review or distribution by >>> others is strictly prohibited. If you are not the intended >>> recipient please contact the sender and delete all copies. >>> ============================================================================= >>> >>> >>> >>> ----- Original Message ----- >>> From: Paul Buckley <Paul.Buckley at Sun.COM> >>> Date: Thursday, September 28, 2006 11:27 am >>> Subject: Re: devfsadm message during miniroot boot >>> To: install-interest at sun.com >>> Cc: Jill Manfield <Jill.Manfield at Sun.COM> >>> >>> >>> >>>> > Can some please give a quick verification if the message encountered >>>> > during the miniroot boot will have any effect on the final > >>>> installationafter flash deployment? >>>> > > Thanks, >>>> > > Paul >>>> > > Paul Buckley wrote: >>>> > >>>>> > >Hello, >>>>> > > >>>>> > >Any reason that the following message during the boot process >>>>> to >>>> >>>> > miniroot during an jumpstart install would effect the final >>>> install > environment. This is just a concern not a problem that we >>>> know of. > Deployment of the flash archive is successful. >>>> >>>>> > > >>>>> > >--------------------- >>>>> > >Custom JumpStart >>>>> > >Configuring devices. >>>>> > >devfsadm: mkdir failed for /dev 0x1ed: Read-only file system >>>>> > >--------------------- >>>>> > > >>>>> > >This is a s10u2 miniroot (x86) patched with 118855-15. >>>>> > > >>>>> > >Thanks, Paul >>>>> > > >>>>> > > >>>>> > > >>>>> > > >>>>> > >Console boot text follows: >>>>> > > >>>>> > > >>>>> > > >>>>> > >module misc/krtld: text at [0xfe873690, 0xfe881827] data at >>>> >>>> > 0xfec40a38>module /kernel/genunix: text at [0xfe881828, >>>> 0xfe98cc27] > data at >>>> >>>>> > >0xfec45a60 >>>>> > >SunOS Release 5.10 Version Generic_118855-15 32-bit >>>>> > >Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved. >>>>> > >Use is subject to license terms. >>>>> > >features: >>>>> > >>>>> >1067fdf<cpuid,sse3,nx,sse2,sse,sep,pat,cx8,pae,mca,mmx,cmov,pge,mtrr,msr >>>>> >>>>> > >,tsc,lgpg> >>>>> > >Using default device instance data >>>>> > >cpuid 0: initialized cpumod: cpu.AuthenticAMD.15 >>>>> > >mem = 2096696K (0x7ff8e000) >>>>> > >root nexus = i86pc >>>>> > >pseudo0 at root >>>>> > >pseudo0 is /pseudo >>>>> > >scsi_vhci0 at root >>>>> > >scsi_vhci0 is /scsi_vhci >>>>> > >isa0 at root >>>>> > >ramdisk0 at root >>>>> > >ramdisk0 is /ramdisk >>>>> > >SMBIOS v2.3 loaded (3017 bytes)SMI polling disabled in favor of >>>>> >>>> >>>> > Solaris>Fault Management for AMD Processors >>>> >>>>> > >pseudo-device: dld0 >>>>> > >dld0 is /pseudo/dld at 0 >>>>> > >pci0 at root: space 0 offset 0 >>>>> > >pci0 is /pci at 0,0 >>>>> > >PCI-device: pci1022,7450 at 1, pci_pci0 >>>>> > >pci_pci0 is /pci at 0,0/pci1022,7450 at 1 >>>>> > >Ethernet address = 0:14:4f:1:93:dc >>>>> > >PCI-device: pci1022,7460 at 6, pci_pci2 >>>>> > >pci_pci2 is /pci at 0,0/pci1022,7460 at 6 >>>>> > >ISA-device: asy0 >>>>> > >asy0 is /isa/asy at 1,3f8 >>>>> > >8042 device: keyboard at 0, kb8042 # 0 >>>>> > >kb80420 is /isa/i8042 at 1,60/keyboard at 0 >>>>> > >PCI-device: pci1022,7464 at 0, ohci0 >>>>> > >ohci0 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0 >>>>> > >PCI-device: pci1022,7464 at 0,1, ohci1 >>>>> > >ohci1 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1 >>>>> > >cpu0: x86 (AuthenticAMD family 15 model 37 step 1 clock 2792 MHz) >>>>> > >cpu0: AMD Opteron(tm) Processor 254 >>>>> > >cpu1: x86 (AuthenticAMD family 15 model 37 step 1 clock 2792 MHz) >>>>> > >cpu1: AMD Opteron(tm) Processor 254 >>>>> > >cpuid 1: initialized cpumod: cpu.AuthenticAMD.15 >>>>> > >pci1 at root: isa 0x0 >>>>> > >pci1 is /pci at 1,0 >>>>> > >Configuring devices. >>>>> > >USB 1.10 device (usb46b,ff10) operating at full speed (USB 1.x) >>>>> on >>>> >>>> > USB>1.10 root hub: device at 3, usb_mid0 at bus address 2 >>>> >>>>> > > American Megatrends Inc. Virtual Keyboard and Mouse >>>>> > >usb_mid0 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0/device at 3 >>>>> > >/pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0/device at 3 (usb_mid0) >>>>> > >online >>>>> > >USB 1.10 interface (usbif46b,ff10.config1.0) operating at full >>>>> speed >>>>> > >(USB 1.x) on USB 1.10 root hub: keyboard at 0, hid0 at bus address 2 >>>>> > > American Megatrends Inc. Virtual Keyboard and Mouse >>>>> > >hid0 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0/device at >>>>> > >3/keyboard at 0 >>>>> > >/pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0/device at 3/keyboard >>>>> > >at 0 >>>>> (hid0) >>>> >>>> > online>USB 1.10 interface (usbif46b,ff10.config1.1) operating at >>>> > full speed >>>> >>>>> > >(USB 1.x) on USB 1.10 root hub: mouse at 1, hid1 at bus address 2 >>>>> > > American Megatrends Inc. Virtual Keyboard and Mouse >>>>> > >hid1 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0/device at >>>>> > >3/mouse at 1 >>>>> > >/pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0/device at 3/mouse at 1 >>>>> > >(hid1) >>>>> online >>>>> > >USB 1.10 device (usb46b,ff20) operating at full speed (USB 1.x) >>>>> on >>>> >>>> > USB>1.10 root hub: storage at 1, scsa2usb0 at bus address 2 >>>> >>>>> > > American Megatrends Inc. Virtual Cdrom Device >>>>> > >scsa2usb0 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage >>>>> > >at 1 >>>>> > >/pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage at 1 >>>>> > >(scsa2usb0) >>>>> online >>>>> > >USB 1.10 device (usb46b,ff40) operating at full speed (USB 1.x) >>>>> on >>>> >>>> > USB>1.10 root hub: storage at 2, scsa2usb1 at bus address 3 >>>> >>>>> > > American Megatrends Inc. Virtual Floppy Device >>>>> > >scsa2usb1 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage >>>>> > >at 2 >>>>> > >/pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage at 2 >>>>> > >(scsa2usb1) >>>>> online >>>>> > >USB 1.10 device (usb3eb,3301) operating at full speed (USB 1.x) >>>>> on >>>> >>>> > USB>1.10 root hub: hub at 3, hubd0 at bus address 4 >>>> >>>>> > >hubd0 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/hub at 3 >>>>> > >/pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/hub at 3 (hubd0) >>>>> > >online >>>>> > >sd0 at scsa2usb0: target 0 lun 0 >>>>> > >sd0 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage at >>>>> > >1/disk at 0,0 >>>>> > >/pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage at 1/disk at >>>>> > >0,0 >>>>> (sd0) >>>> >>>> > online>sd1 at scsa2usb1: target 0 lun 0 >>>> >>>>> > >sd1 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage at >>>>> > >2/disk at 0,0 >>>>> > >/pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage at 2/disk at >>>>> > >0,0 >>>>> (sd1) >>>> >>>> > online>pseudo-device: devinfo0 >>>> >>>>> > >devinfo0 is /pseudo/devinfo at 0 >>>>> > >xsvc0 at root >>>>> > >xsvc0 is /xsvc >>>>> > >PCI-device: pci1022,7450 at 2, pci_pci1 >>>>> > >pci_pci1 is /pci at 0,0/pci1022,7450 at 2 >>>>> > >PCI-device: pci1022,7450 at 1, pci_pci3 >>>>> > >pseudo-device: pseudo1 >>>>> > >pci_pci3 is /pci at 1,0/pci1022,7450 at 1 >>>>> > >pseudo1 is /pseudo/zconsnex at 1 >>>>> > >PCI-device: pci1022,7450 at 2, pci_pci4 >>>>> > >pci_pci4 is /pci at 1,0/pci1022,7450 at 2 >>>>> > >/pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3 (mpt0): >>>>> > > Rev. 2 LSI, Inc. 1064 found. >>>>> > >/pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3 (mpt0): >>>>> > > mpt0 supports power management. >>>>> > > ATAPI device at targ 0, lun 0 lastlun 0x0 >>>>> > > model DV-28SL >>>>> > > ATA/ATAPI-5 supported, majver 0x3c minver 0x0 >>>>> > >/pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3 (mpt0): >>>>> > > mpt0 Firmware version v1.4.0.0 (IR) >>>>> > >/pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3 (mpt0): >>>>> > > mpt0: IOC Operational. >>>>> > >PCI-device: ide at 0, ata0 >>>>> > >ata0 is /pci at 0,0/pci-ide at 7,1/ide at 0 >>>>> > > ATA DMA off: disabled. Control with >>>>> "atapi-cd-dma-enabled" >>>>> > >property >>>>> > > PIO mode 4 selected >>>>> > > ATA DMA off: disabled. Control with >>>>> "atapi-cd-dma-enabled" >>>>> > >property >>>>> > > PIO mode 4 selected >>>>> > > ATA DMA off: disabled. Control with >>>>> "atapi-cd-dma-enabled" >>>>> > >property >>>>> > > PIO mode 4 selected >>>>> > >pseudo-device: fssnap0 >>>>> > >fssnap0 is /pseudo/fssnap at 0 >>>>> > >pseudo-device: ramdisk1024 >>>>> > >ramdisk1024 is /pseudo/ramdisk at 1024 >>>>> > >pseudo-device: fcp0 >>>>> > >fcp0 is /pseudo/fcp at 0 >>>>> > >pseudo-device: winlock0 >>>>> > >winlock0 is /pseudo/winlock at 0 >>>>> > >pseudo-device: fcsm0 >>>>> > >fcsm0 is /pseudo/fcsm at 0 >>>>> > >pseudo-device: llc10 >>>>> > >llc10 is /pseudo/llc1 at 0 >>>>> > >pseudo-device: lofi0 >>>>> > >lofi0 is /pseudo/lofi at 0 >>>>> > >pseudo-device: pool0 >>>>> > >pool0 is /pseudo/pool at 0 >>>>> > >sd2 at ata0: target 0 lun 0 >>>>> > >sd2 is /pci at 0,0/pci-ide at 7,1/ide at 0/sd at 0,0 >>>>> > >pseudo-device: bmc0 >>>>> > >bmc0 is /pseudo/bmc at 0 >>>>> > >pseudo-device: zfs0 >>>>> > >zfs0 is /pseudo/zfs at 0 >>>>> > >pseudo-device: power0 >>>>> > >power0 is /pseudo/power at 0 >>>>> > >/pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3 (mpt0): >>>>> > > Volume 1 is optimal >>>>> > >/pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3 (mpt0): >>>>> > > Volume 0 is optimal >>>>> > >PCI-device: pci1000,3060 at 3, mpt0 >>>>> > >mpt0 is /pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3 >>>>> > >sd3 at mpt0: target 0 lun 0 >>>>> > >sd3 is /pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3/sd at 0,0 >>>>> > >sd4 at mpt0: target 1 lun 0 >>>>> > >sd4 is /pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3/sd at 1,0 >>>>> > >Custom JumpStart >>>>> > >Configuring devices. >>>>> > >devfsadm: mkdir failed for /dev 0x1ed: Read-only file system >>>>> > > ATA DMA off: disabled. Control with >>>>> "atapi-cd-dma-enabled" >>>>> > >property >>>>> > > PIO mode 4 selected >>>>> > > ATA DMA off: disabled. Control with >>>>> "atapi-cd-dma-enabled" >>>>> > >property >>>>> > > PIO mode 4 selected >>>>> > > ATA DMA off: disabled. Control with >>>>> "atapi-cd-dma-enabled" >>>>> > >property >>>>> > > PIO mode 4 selected >>>>> > >Beginning system identification... >>>>> > >Searching for configuration file(s)... >>>>> > >Using sysid configuration file >>>>> > >65.185.233.84:/autocfg/clients/0193dc/sysidcfg >>>>> > >Search complete. >>>>> > >Discovering additional network configuration... >>>>> > >Completing system identification... >>>>> > >Starting remote procedure call (RPC) services: done. >>>>> > >System identification complete. >>>>> > >Starting Solaris installation program... >>>>> > >Searching for JumpStart directory... >>>>> > >Using rules.ok from 65.185.233.84:/autocfg/clients/0193dc. >>>>> > >Checking rules.ok file... >>>>> > >Using begin script: begin.sh >>>>> > >Using derived profile: begin.sh >>>>> > >Using finish script: finish.sh >>>>> > >/sbin/dhcpinfo: primary interface requested but no primary >>>> >>>> > interface is >>>> >>>>> > >set >>>>> > >Executing JumpStart preinstall phase... >>>>> > >Executing begin script "begin.sh"... >>>>> > >mounting filesystems from 65.185.233.84... >>>>> > >mounting complete >>>>> > >INFO Jumpstart.Global - starting telnet daemon... >>>>> > >INFO Jumpstart.Global - started telnet daemon >>>>> > >INFO Jumpstart.Global.Network - preparing chroot area for >>>> >>>> > ifspeed...>INFO Jumpstart.Global.Network - current interface >>>> states: >>>> >>>>> > >e1000g0: up, autonegotiated 100/half >>>>> > > capabilities: auto 1000/full 100/full 100/half 10/full 10/half >>>>> > > link partner capabilities: auto 100/half >>>>> > >e1000g1: down >>>>> > > capabilities: auto 1000/full 100/full 100/half 10/full 10/half >>>>> > >e1000g2: down >>>>> > > capabilities: auto 1000/full 100/full 100/half 10/full 10/half >>>>> > >e1000g3: down >>>>> > > capabilities: auto 1000/full 100/full 100/half 10/full 10/half >>>>> > >INFO Jumpstart.Global.Network - setting speed for e1000g0 (best- >>>>> >>>> >>>> > guess)>INFO Jumpstart.Global.Network - set speed completed >>>> >>>>> > >INFO Jumpstart.Global.Profile - Determining Server Hardware type >>>>> > >INFO Jumpstart.Global.Profile - RAID relationship for >>>>> c0t0d0 >>>> >>>> > already>established >>>> >>>>> > >INFO Jumpstart.Global.Profile - creating Solaris partition on >>>>> >>>> >>>> > c0t0d0>INFO Jumpstart.Global.Profile - rereading disk information >>>> >>>>> > >INFO Jumpstart.Global.Profile - creating Solaris label on c0t0d0 >>>>> > >INFO Jumpstart.Global.Profile - constructed derived >>>>> profile >>>> >>>> > using root >>>> >>>>> > >disk c0t0d0 >>>>> > >INFO Jumpstart.Global.Profile - decided to use 4196 megabytes >>>>> of >>>> >>>> > swap>Begin script begin.sh execution completed. >>>> >>>>> > >Searching for SolStart directory... >>>>> > >Checking rules.ok file... >>>>> > >Using begin script: install_begin >>>>> > >Using finish script: patch_finish >>>>> > >/sbin/dhcpinfo: primary interface requested but no primary >>>> >>>> > interface is >>>> >>>>> > >set >>>>> > >Executing SolStart preinstall phase... >>>>> > >Executing begin script "install_begin"... >>>>> > >Begin script install_begin execution completed. >>>>> > > >>>>> > >Processing profile >>>>> > > >>>>> > > >>>>> > > > > >>>>> >>>> >>>> > > >> >> >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> install-discuss mailing list >> install-discuss at opensolaris.org >> http://opensolaris.org/mailman/listinfo/install-discuss >
