Hi Jill,
Some discussion on install-discuss lead to me looking at 118855-15 and
its contents. It delivers a file named:
/lib/svc/method/devices-local
Which overwrites the miniroot file by this name. The miniroot file looks
like this pre-patch:
> #!/bin/sh
> exit 0
However, the new file has a lot of stuff in it, including the following:
> svcprop -q -p system/reconfigure system/svc/restarter:default
> if [ $? -eq 0 ]; then
> echo 'Configuring devices.' > /dev/msglog 2>&1
> /usr/sbin/devfsadm >/dev/msglog 2>&1
> if [ -x /usr/ucb/ucblinks -a -f /usr/ucblib/ucblinks.awk ]; then
> /usr/ucb/ucblinks >/dev/null 2>&1
> fi
>
> #
> # Flush any existing socket mappings since the major numbers of
> # the device files may have changed.
> #
> /usr/bin/awk '/^[^#]/ { print $1, $2, $3 }' /etc/sock2path | \
> /sbin/soconfig -f /dev/fd/0 >/dev/null 2>&1
> /sbin/soconfig -f /etc/sock2path >/dev/null 2>&1
>
> #
> # Update kernel driver.conf cache.
> #
> /usr/sbin/devfsadm -I
> fi
Which is where I believe the devfsadm call on a read only root is coming
from. The miniroot needs to keep this file as it is, so that the install
process operates correctly.
So, you cannot patch this in the miniroot.
I am not sure what is in the other patches you applied, but to apply a
patch to the miniroot prior to install, you need to be sure it is
recommended for installation in the miniroot. Things like pkg commands,
or patch installation tools come to mind. The KU shouldn't be applied to
the miniroot.
thanks,
sarah
****
Jill Manfield wrote:
> This issue is only present in Solaris 10 Update 2.
>
>
> Below are the patches he added to the Solaris 10 x86 0606 miniroot, and
> the steps he used.
>
> mkdir mini unp
>
> cd mini
>
> gzcat sol10-x86-0606-bootimage.tar.gz | tar xpf -
>
> cd ..
>
> PKG_NONABI_SYMLINKS="true"
> export PKG_NONABI_SYMLINKS
>
> export PATH=/usr/bin:/usr/sbin
>
> /boot/solaris/bin/root_archive unpackmedia /var/tmp/mini /var/tmp/unp
>
> unzip -q 118344-13.zip
> unzip -q 119255-27.zip
> unzip -q 118855-15.zip
> unzip -q 119535-09.zip
> unzip -q 119082-23.zip
>
> patchadd -C /var/tmp/unp /var/tmp/118344-13
> patchadd -C /var/tmp/unp /var/tmp/119255-27
> patchadd -C /var/tmp/unp /var/tmp/118855-15
> patchadd -C /var/tmp/unp /var/tmp/119535-09
> patchadd -C /var/tmp/unp /var/tmp/119082-23
>
> /boot/solaris/bin/root_archive packmedia /var/tmp/mini /var/tmp/unp
>
> cd mini
>
> tar cpf ../new.tar .
>
> The whole reason why he had to add the patches to the miniroot was to get
> around forcing the network to full duplex in the install. This became an
> issue with Solaris 10 6/06
>
> Here is the info on the prescript:
>
> '/usr/sbin/ndd -set /dev/e1000g0 adv_autoneg_cap 1'
> '/usr/sbin/ndd -set /dev/e1000g0 adv_100fdx_cap 1'
> '/usr/sbin/ndd -set /dev/e1000g0 adv_1000fdx_cap 0'
> '/usr/sbin/ndd -set /dev/e1000g0 adv_100hdx_cap 0'
> '/usr/sbin/ndd -set /dev/e1000g0 adv_10fdx_cap 0'
> '/usr/sbin/ndd -set /dev/e1000g0 adv_10hdx_cap 0'
> '/usr/sbin/ndd -set /dev/e1000g0 adv_autoneg_cap 0'
>
> (I asked him to provide the commands from his script, hence the ' characters)
>
> Let me know if that helps or you need more info.
> ===========================================================================
>
> S U N M I C R O S Y S T E M S I N C.
>
> Jill Manfield - TSE-X64 Support Team
> email: jill.manfield at sun.com
> phone: (800)USA-4SUN (Reference your case #)
> address: 1617 Southwood Drive Nashua,NH 03063
> mailstop: NSH-01- B287
> Mgr: Dave O'Connor: dave.oconnor at sun.com
>
> Submit, View and Update tickets at http://www.sun.com/service/online
>
> This email may contain confidential and privileged material for the sole use
> of the intended recipient. Any review or distribution by others is strictly
> prohibited. If you are not the intended recipient please contact the sender
> and delete all copies.
> =============================================================================
>
> ----- Original Message -----
> From: Sarah Jelinek <Sarah.Jelinek at Sun.COM>
> Date: Tuesday, October 3, 2006 4:49 pm
> Subject: RE:devfsadm message during miniroot boot
> To: Jill.Manfield at Sun.COM, Paul.Buckley at Sun.COM
>
>
>> Hi Jill and Paul,
>>
>> I am the install POC for the week and I just saw this email. The
>> error
>> message you are seeing indicates that someone is trying to run
>> devfsadm
>> on a read only root fs. During the install process we use /tmp/dev
>> to do
>> our work, and normally would not see this happen. I notice that you
>> said
>> you applied patch 118855-19 to the miniroot. How exactly did you do
>> this?
>> Also, I note that there is a begin.sh script being run, is there
>> any
>> devfsadm calls in this script?
>>
>> Have you tried to run this jumpstart install with the base s10u2
>> miniroot, without the patch data? If so, was this message present
>> as well?
>>
>> Yes, this message is a concern, so I need a bit more data to see
>> how we
>> got there.
>>
>> thanks,
>> sarah
>> ****
>>
>>
>>
>>
>>> Can anyone answer this please please???? My customer has been
>>>
>> waiting for an answer and is getting antsy to whether this error
>> could be ignored as benign. Please read Paul's description
>> thanks! He is a top account Time Warner customer and his
>> deployment is being held up by my response.
>>
>> ===========================================================================
>>
>>
>>> S U N M I C R O S Y S T E M S I N C.
>>>
>>> Jill Manfield - TSE-X64 Support Team
>>> email: jill.manfield at sun.com
>>> phone: (800)USA-4SUN (Reference your case #)
>>> address: 1617 Southwood Drive Nashua,NH 03063
>>> mailstop: NSH-01- B287
>>> Mgr: Dave O'Connor: dave.oconnor at sun.com
>>>
>>> Submit, View and Update tickets at http://www.sun.com/service/online
>>>
>>> This email may contain confidential and privileged material for
>>>
>> the sole use of the intended recipient. Any review or distribution
>> by others is strictly prohibited. If you are not the intended
>> recipient please contact the sender and delete all copies.
>>
>> =============================================================================>
>>
>>> ----- Original Message -----
>>> From: Paul Buckley <Paul.Buckley at Sun.COM>
>>> Date: Thursday, September 28, 2006 11:27 am
>>> Subject: Re: devfsadm message during miniroot boot
>>> To: install-interest at sun.com
>>> Cc: Jill Manfield <Jill.Manfield at Sun.COM>
>>>
>>>
>>>
>>>>> Can some please give a quick verification if the message
>>>>>
>> encountered>> > during the miniroot boot will have any effect on
>> the final
>>
>>>>> installationafter flash deployment?
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Paul
>>>>>
>>>>> Paul Buckley wrote:
>>>>>
>>>>>
>>>>
>>>>
>>>>>>> Hello,
>>>>>>>
>>>>>>> Any reason that the following message during the boot
>>>>>>>
>> process to
>>
>>>>>
>>>>> miniroot during an jumpstart install would effect the final
>>>>>
>> install
>>
>>>>> environment. This is just a concern not a problem that we know
>>>>>
>> of.
>>
>>>>> Deployment of the flash archive is successful.
>>>>>
>>>>
>>>>
>>>>>>> ---------------------
>>>>>>> Custom JumpStart
>>>>>>> Configuring devices.
>>>>>>> devfsadm: mkdir failed for /dev 0x1ed: Read-only file system
>>>>>>> ---------------------
>>>>>>>
>>>>>>> This is a s10u2 miniroot (x86) patched with 118855-15.
>>>>>>>
>>>>>>> Thanks, Paul
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Console boot text follows:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> module misc/krtld: text at [0xfe873690, 0xfe881827] data at
>>>>>>>
>>>>>
>>>>> 0xfec40a38>module /kernel/genunix: text at [0xfe881828,
>>>>>
>> 0xfe98cc27]
>>
>>>>> data at
>>>>>
>>>>
>>>>
>>>>>>> 0xfec45a60
>>>>>>> SunOS Release 5.10 Version Generic_118855-15 32-bit
>>>>>>> Copyright 1983-2005 Sun Microsystems, Inc. All rights
>>>>>>>
>> reserved.>>> > >Use is subject to license terms.
>>
>>>>>>> features:
>>>>>>>
>>> 1067fdf<cpuid,sse3,nx,sse2,sse,sep,pat,cx8,pae,mca,mmx,cmov,pge,mtrr,msr>>>
>>> > >,tsc,lgpg>
>>>
>>>>>>> Using default device instance data
>>>>>>> cpuid 0: initialized cpumod: cpu.AuthenticAMD.15
>>>>>>> mem = 2096696K (0x7ff8e000)
>>>>>>> root nexus = i86pc
>>>>>>> pseudo0 at root
>>>>>>> pseudo0 is /pseudo
>>>>>>> scsi_vhci0 at root
>>>>>>> scsi_vhci0 is /scsi_vhci
>>>>>>> isa0 at root
>>>>>>> ramdisk0 at root
>>>>>>> ramdisk0 is /ramdisk
>>>>>>> SMBIOS v2.3 loaded (3017 bytes)SMI polling disabled in favor
>>>>>>>
>> of
>>
>>>>>
>>>>> Solaris>Fault Management for AMD Processors
>>>>>
>>>>
>>>>
>>>>>>> pseudo-device: dld0
>>>>>>> dld0 is /pseudo/dld at 0
>>>>>>> pci0 at root: space 0 offset 0
>>>>>>> pci0 is /pci at 0,0
>>>>>>> PCI-device: pci1022,7450 at 1, pci_pci0
>>>>>>> pci_pci0 is /pci at 0,0/pci1022,7450 at 1
>>>>>>> Ethernet address = 0:14:4f:1:93:dc
>>>>>>> PCI-device: pci1022,7460 at 6, pci_pci2
>>>>>>> pci_pci2 is /pci at 0,0/pci1022,7460 at 6
>>>>>>> ISA-device: asy0
>>>>>>> asy0 is /isa/asy at 1,3f8
>>>>>>> 8042 device: keyboard at 0, kb8042 # 0
>>>>>>> kb80420 is /isa/i8042 at 1,60/keyboard at 0
>>>>>>> PCI-device: pci1022,7464 at 0, ohci0
>>>>>>> ohci0 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0
>>>>>>> PCI-device: pci1022,7464 at 0,1, ohci1
>>>>>>> ohci1 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1
>>>>>>> cpu0: x86 (AuthenticAMD family 15 model 37 step 1 clock 2792
>>>>>>>
>> MHz)>>> > >cpu0: AMD Opteron(tm) Processor 254
>>
>>>>>>> cpu1: x86 (AuthenticAMD family 15 model 37 step 1 clock 2792
>>>>>>>
>> MHz)>>> > >cpu1: AMD Opteron(tm) Processor 254
>>
>>>>>>> cpuid 1: initialized cpumod: cpu.AuthenticAMD.15
>>>>>>> pci1 at root: isa 0x0
>>>>>>> pci1 is /pci at 1,0
>>>>>>> Configuring devices.
>>>>>>> USB 1.10 device (usb46b,ff10) operating at full speed (USB
>>>>>>>
>> 1.x) on
>>
>>>>>
>>>>> USB>1.10 root hub: device at 3, usb_mid0 at bus address 2
>>>>>
>>>>
>>>>
>>>>>>> American Megatrends Inc. Virtual Keyboard and Mouse
>>>>>>> usb_mid0 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0/device at 3
>>>>>>> /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0/device at 3 (usb_mid0)
>>>>>>>
>> online>>> > >USB 1.10 interface (usbif46b,ff10.config1.0) operating
>> at full speed
>>
>>>>>>> (USB 1.x) on USB 1.10 root hub: keyboard at 0, hid0 at bus
>>>>>>>
>> address 2
>>
>>>>>>> American Megatrends Inc. Virtual Keyboard and Mouse
>>>>>>> hid0 is
>>>>>>>
>> /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0/device at 3/keyboard at 0>>>
>> >
>>
>>> /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0/device at 3/keyboard at 0
>>> (hid0)
>>>
>>>>>
>>>>> online>USB 1.10 interface (usbif46b,ff10.config1.1) operating
>>>>>
>> at
>>
>>>>> full speed
>>>>>
>>>>
>>>>
>>>>>>> (USB 1.x) on USB 1.10 root hub: mouse at 1, hid1 at bus address 2
>>>>>>> American Megatrends Inc. Virtual Keyboard and Mouse
>>>>>>> hid1 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0/device at
>>>>>>> 3/mouse at 1
>>>>>>> /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0/device at 3/mouse at 1
>>>>>>>
>> (hid1) online
>>
>>>>>>> USB 1.10 device (usb46b,ff20) operating at full speed (USB
>>>>>>>
>> 1.x) on
>>
>>>>>
>>>>> USB>1.10 root hub: storage at 1, scsa2usb0 at bus address 2
>>>>>
>>>>
>>>>
>>>>>>> American Megatrends Inc. Virtual Cdrom Device
>>>>>>> scsa2usb0 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage
>>>>>>> at 1
>>>>>>> /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage at 1
>>>>>>>
>> (scsa2usb0) online
>>
>>>>>>> USB 1.10 device (usb46b,ff40) operating at full speed (USB
>>>>>>>
>> 1.x) on
>>
>>>>>
>>>>> USB>1.10 root hub: storage at 2, scsa2usb1 at bus address 3
>>>>>
>>>>
>>>>
>>>>>>> American Megatrends Inc. Virtual Floppy Device
>>>>>>> scsa2usb1 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage
>>>>>>> at 2
>>>>>>> /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage at 2
>>>>>>>
>> (scsa2usb1) online
>>
>>>>>>> USB 1.10 device (usb3eb,3301) operating at full speed (USB
>>>>>>>
>> 1.x) on
>>
>>>>>
>>>>> USB>1.10 root hub: hub at 3, hubd0 at bus address 4
>>>>>
>>>>
>>>>
>>>>>>> hubd0 is /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/hub at 3
>>>>>>> /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/hub at 3 (hubd0)
>>>>>>> online
>>>>>>> sd0 at scsa2usb0: target 0 lun 0
>>>>>>> sd0 is
>>>>>>>
>> /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage at 1/disk at
>> 0,0>>> >
>>
>>> /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage at 1/disk at 0,0
>>> (sd0)
>>>
>>>>>
>>>>> online>sd1 at scsa2usb1: target 0 lun 0
>>>>>
>>>>
>>>>
>>>>>>> sd1 is
>>>>>>>
>> /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage at 2/disk at
>> 0,0>>> >
>>
>>> /pci at 0,0/pci1022,7460 at 6/pci1022,7464 at 0,1/storage at 2/disk at 0,0
>>> (sd1)
>>>
>>>>>
>>>>> online>pseudo-device: devinfo0
>>>>>
>>>>
>>>>
>>>>>>> devinfo0 is /pseudo/devinfo at 0
>>>>>>> xsvc0 at root
>>>>>>> xsvc0 is /xsvc
>>>>>>> PCI-device: pci1022,7450 at 2, pci_pci1
>>>>>>> pci_pci1 is /pci at 0,0/pci1022,7450 at 2
>>>>>>> PCI-device: pci1022,7450 at 1, pci_pci3
>>>>>>> pseudo-device: pseudo1
>>>>>>> pci_pci3 is /pci at 1,0/pci1022,7450 at 1
>>>>>>> pseudo1 is /pseudo/zconsnex at 1
>>>>>>> PCI-device: pci1022,7450 at 2, pci_pci4
>>>>>>> pci_pci4 is /pci at 1,0/pci1022,7450 at 2
>>>>>>> /pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3 (mpt0):
>>>>>>> Rev. 2 LSI, Inc. 1064 found.
>>>>>>> /pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3 (mpt0):
>>>>>>> mpt0 supports power management.
>>>>>>> ATAPI device at targ 0, lun 0 lastlun 0x0
>>>>>>> model DV-28SL
>>>>>>> ATA/ATAPI-5 supported, majver 0x3c minver 0x0
>>>>>>> /pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3 (mpt0):
>>>>>>> mpt0 Firmware version v1.4.0.0 (IR)
>>>>>>> /pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3 (mpt0):
>>>>>>> mpt0: IOC Operational.
>>>>>>> PCI-device: ide at 0, ata0
>>>>>>> ata0 is /pci at 0,0/pci-ide at 7,1/ide at 0
>>>>>>> ATA DMA off: disabled. Control with "atapi-cd-dma-
>>>>>>>
>> enabled">>> > >property
>>
>>>>>>> PIO mode 4 selected
>>>>>>> ATA DMA off: disabled. Control with "atapi-cd-dma-
>>>>>>>
>> enabled">>> > >property
>>
>>>>>>> PIO mode 4 selected
>>>>>>> ATA DMA off: disabled. Control with "atapi-cd-dma-
>>>>>>>
>> enabled">>> > >property
>>
>>>>>>> PIO mode 4 selected
>>>>>>> pseudo-device: fssnap0
>>>>>>> fssnap0 is /pseudo/fssnap at 0
>>>>>>> pseudo-device: ramdisk1024
>>>>>>> ramdisk1024 is /pseudo/ramdisk at 1024
>>>>>>> pseudo-device: fcp0
>>>>>>> fcp0 is /pseudo/fcp at 0
>>>>>>> pseudo-device: winlock0
>>>>>>> winlock0 is /pseudo/winlock at 0
>>>>>>> pseudo-device: fcsm0
>>>>>>> fcsm0 is /pseudo/fcsm at 0
>>>>>>> pseudo-device: llc10
>>>>>>> llc10 is /pseudo/llc1 at 0
>>>>>>> pseudo-device: lofi0
>>>>>>> lofi0 is /pseudo/lofi at 0
>>>>>>> pseudo-device: pool0
>>>>>>> pool0 is /pseudo/pool at 0
>>>>>>> sd2 at ata0: target 0 lun 0
>>>>>>> sd2 is /pci at 0,0/pci-ide at 7,1/ide at 0/sd at 0,0
>>>>>>> pseudo-device: bmc0
>>>>>>> bmc0 is /pseudo/bmc at 0
>>>>>>> pseudo-device: zfs0
>>>>>>> zfs0 is /pseudo/zfs at 0
>>>>>>> pseudo-device: power0
>>>>>>> power0 is /pseudo/power at 0
>>>>>>> /pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3 (mpt0):
>>>>>>> Volume 1 is optimal
>>>>>>> /pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3 (mpt0):
>>>>>>> Volume 0 is optimal
>>>>>>> PCI-device: pci1000,3060 at 3, mpt0
>>>>>>> mpt0 is /pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3
>>>>>>> sd3 at mpt0: target 0 lun 0
>>>>>>> sd3 is /pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3/sd at 0,0
>>>>>>> sd4 at mpt0: target 1 lun 0
>>>>>>> sd4 is /pci at 0,0/pci1022,7450 at 2/pci1000,3060 at 3/sd at 1,0
>>>>>>> Custom JumpStart
>>>>>>> Configuring devices.
>>>>>>> devfsadm: mkdir failed for /dev 0x1ed: Read-only file system
>>>>>>> ATA DMA off: disabled. Control with "atapi-cd-dma-
>>>>>>>
>> enabled">>> > >property
>>
>>>>>>> PIO mode 4 selected
>>>>>>> ATA DMA off: disabled. Control with "atapi-cd-dma-
>>>>>>>
>> enabled">>> > >property
>>
>>>>>>> PIO mode 4 selected
>>>>>>> ATA DMA off: disabled. Control with "atapi-cd-dma-
>>>>>>>
>> enabled">>> > >property
>>
>>>>>>> PIO mode 4 selected
>>>>>>> Beginning system identification...
>>>>>>> Searching for configuration file(s)...
>>>>>>> Using sysid configuration file
>>>>>>> 65.185.233.84:/autocfg/clients/0193dc/sysidcfg
>>>>>>> Search complete.
>>>>>>> Discovering additional network configuration...
>>>>>>> Completing system identification...
>>>>>>> Starting remote procedure call (RPC) services: done.
>>>>>>> System identification complete.
>>>>>>> Starting Solaris installation program...
>>>>>>> Searching for JumpStart directory...
>>>>>>> Using rules.ok from 65.185.233.84:/autocfg/clients/0193dc.
>>>>>>> Checking rules.ok file...
>>>>>>> Using begin script: begin.sh
>>>>>>> Using derived profile: begin.sh
>>>>>>> Using finish script: finish.sh
>>>>>>> /sbin/dhcpinfo: primary interface requested but no primary
>>>>>>>
>>>>>
>>>>> interface is
>>>>>
>>>>
>>>>
>>>>>>> set
>>>>>>> Executing JumpStart preinstall phase...
>>>>>>> Executing begin script "begin.sh"...
>>>>>>> mounting filesystems from 65.185.233.84...
>>>>>>> mounting complete
>>>>>>> INFO Jumpstart.Global - starting telnet daemon...
>>>>>>> INFO Jumpstart.Global - started telnet daemon
>>>>>>> INFO Jumpstart.Global.Network - preparing chroot area for
>>>>>>>
>>>>>
>>>>> ifspeed...>INFO Jumpstart.Global.Network - current interface
>>>>>
>> states:>>
>>
>>>>>>> e1000g0: up, autonegotiated 100/half
>>>>>>> capabilities: auto 1000/full 100/full 100/half 10/full
>>>>>>>
>> 10/half>>> > > link partner capabilities: auto 100/half
>>
>>>>>>> e1000g1: down
>>>>>>> capabilities: auto 1000/full 100/full 100/half 10/full
>>>>>>>
>> 10/half>>> > >e1000g2: down
>>
>>>>>>> capabilities: auto 1000/full 100/full 100/half 10/full
>>>>>>>
>> 10/half>>> > >e1000g3: down
>>
>>>>>>> capabilities: auto 1000/full 100/full 100/half 10/full
>>>>>>>
>> 10/half>>> > >INFO Jumpstart.Global.Network - setting speed for
>> e1000g0 (best-
>>
>>>>>
>>>>> guess)>INFO Jumpstart.Global.Network - set speed completed
>>>>>
>>>>
>>>>
>>>>>>> INFO Jumpstart.Global.Profile - Determining Server
>>>>>>>
>> Hardware type
>>
>>>>>>> INFO Jumpstart.Global.Profile - RAID relationship for
>>>>>>>
>> c0t0d0
>>
>>>>>
>>>>> already>established
>>>>>
>>>>
>>>>
>>>>>>> INFO Jumpstart.Global.Profile - creating Solaris partition
>>>>>>>
>> on
>>
>>>>>
>>>>> c0t0d0>INFO Jumpstart.Global.Profile - rereading disk
>>>>>
>> information>>
>>
>>>>>>> INFO Jumpstart.Global.Profile - creating Solaris label on
>>>>>>>
>> c0t0d0>>> > >INFO Jumpstart.Global.Profile - constructed derived
>> profile
>>
>>>>>
>>>>> using root
>>>>>
>>>>
>>>>
>>>>>>> disk c0t0d0
>>>>>>> INFO Jumpstart.Global.Profile - decided to use 4196
>>>>>>>
>> megabytes of
>>
>>>>>
>>>>> swap>Begin script begin.sh execution completed.
>>>>>
>>>>
>>>>
>>>>>>> Searching for SolStart directory...
>>>>>>> Checking rules.ok file...
>>>>>>> Using begin script: install_begin
>>>>>>> Using finish script: patch_finish
>>>>>>> /sbin/dhcpinfo: primary interface requested but no primary
>>>>>>>
>>>>>
>>>>> interface is
>>>>>
>>>>
>>>>
>>>>>>> set
>>>>>>> Executing SolStart preinstall phase...
>>>>>>> Executing begin script "install_begin"...
>>>>>>> Begin script install_begin execution completed.
>>>>>>>
>>>>>>> Processing profile
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>
