>> Actually, try it with a value of 2 or higher, and >> you'll get more.
wow! I started getting more with 11. At 12 I got: Configuring physical storage devices DEBUG(10422/lupi_bebasic): BEO: option <ufs> devicePath </dev/md/dsk/ d30> prepare DEBUG(10422/lupi_bebasic): BEO: option <ufs> devicePath </dev/md/dsk/ d30> p1 </dev/md/dsk/d30> p2 <> DEBUG(10422/lupi_bebasic): BEO: option <ufs> device </dev/md/dsk/d30> not supported: </dev/md/dsk/d30> Configuring logical storage devices guess that makes sense as d30 is logical. at LU_DEBUG=200 I get 15MB of debug information, however these lines: DEBUG(11878/ludo_create): SMLV: get parameter <option> tag <fileSystemConfiguration-Component-MountPoint> DEBUG(11878/ludo_create): SMLV: tag <fileSystemConfiguration- Component-MountPoint> option = <preserve> Analyzing system configuration. Comparing source boot environment <snv_40> file systems with the file system(s) you specified for the new boot environment. Determining which file systems should be in the new boot environment. Updating boot environment description database on all BEs. Searching /dev for possible boot environment filesystem devices ERROR: Mirror </dev/md/dsk/d30> submirror </dev/md/rdsk/d20> is not single disk stripe. ERROR: Cannot determine boot device for Solaris Volume Manager metadevice </dev/md/dsk/d30>. The only metadevices that support the root file system are a stripe with only a single disk or a mirror on a single-disk stripe. DEBUG(11878/ludo_create): QUEV: engFinalize: DUMP OF ALL QUEUES BEFORE FINALIZATION: DEBUG(11878/ludo_create): QUEV: ************************************************************************ ******** ... always stand without further info. Not sure where to start looking. -C unfortunately doesn't help either. How do I set lu back to the beginning to start over again and see if that works? ta - mo
