Hello all again,
This problem is new to kernel 3.2.0-rc6, here is the diff between the bad and 
good register dump. I tried to correct the register but without any luck...
Marked with < is not working kernel 3.2.0Marked with > works. kernel 3.0.0-12 / 
also works fine in LiveCD of Ubuntu 11.10

<                GEN6_INSTDONE_1: 0x00000000<                GEN6_INSTDONE_2: 
0x00000000--->                GEN6_INSTDONE_1: 0xfffffffe>                
GEN6_INSTDONE_2: 0xffffffff31c31<                       DSPACNTR: 0xd8004000 
(enabled)--->                       DSPACNTR: 0xd8004400 (enabled)34c34<        
               DSPASURF: 0x00064000--->                       DSPASURF: 
0x0665d00070c70<               PCH_DREF_CONTROL: 0x00000400 (cpu source 
disable, ssc_source disable, nonspread_source enable, superspread_source 
disable, ssc4_mode downspread, ssc1 disable, ssc4 disable)--->               
PCH_DREF_CONTROL: 0x00001400 (cpu source disable, ssc_source enable, 
nonspread_source enable, superspread_source disable, ssc4_mode downspread, ssc1 
disable, ssc4 disable)79,80c79,80<                       PCH_FPA0: 0x00021007 
(n = 2, m1 = 16, m2 = 7)<                       PCH_FPA1: 0x00021007 (n = 2, m1 
= 16, m2 = 7)--->                       PCH_FPA0: 0x00c21007 (n = 2, m1 = 16, 
m2 = 7)>                       PCH_FPA1: 0x00c21007 (n = 2, m1 = 16, m2 = 7)
From: paulo_lo...@msn.com
To: intel-gfx@lists.freedesktop.org
Subject: RE: [Intel-gfx] RGB Problem with Intel i915 driver, i3 2010T, RGB 
color output over HDMI
Date: Tue, 24 Jan 2012 15:24:04 +0000







Hello all,
This e-mail is a continuation of my previews one regarding HDMI modeline output 
problems. So far with the help of Rodrigo Vivi i have manage to output the 
1920x1080p@60hz mode over HDMI to my AV receiver. (To fix my previews problem i 
inserted the EDID frame directly inside drm_edid.c file. So i dont read EDID 
from the AV i2c bus anymore. So the mode is always set correctly.)
The issue now is that the AV reports that the signal is not in RGB mode and the 
image shows some strange colors, specially on the white color (showing like 
greens).
Does any one has any idea if this is a problem on the EDID or inside drm/i915? 
All comments and help are very appreciated.-- Paulo Louro

                                                                                
                                          
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to