On Mon, 20 Feb 2017 15:08:32 +0100
Hans de Goede <hdego...@redhat.com> wrote:
> intel_dsi_disable/enable only have one caller, merge them into their
> respective callers.
>
> Change msleep(2) into usleep_range(2000, 5000) to make checkpatch happy,
> otherwise no functional changes.
>
> The main advantage of this change is that it makes it easier to
> follow all the steps of the panel enable / disable sequence when
> reading the code.
>
> Signed-off-by: Hans de Goede <hdego...@redhat.com>
> Acked-by: Jani Nikula <jani.nik...@intel.com>
> ---
> drivers/gpu/drm/i915/intel_dsi.c | 108
> ++++++++++++++++-----------------------
> 1 file changed, 44 insertions(+), 64 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c
> b/drivers/gpu/drm/i915/intel_dsi.c
> index 2f0af98..e808dce 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -505,32 +505,6 @@ static void intel_dsi_port_disable(struct intel_encoder
> *encoder)
> }
> }
>
> -static void intel_dsi_enable(struct intel_encoder *encoder)
> -{
> - struct drm_device *dev = encoder->base.dev;
> - struct drm_i915_private *dev_priv = to_i915(dev);
> - struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> - enum port port;
> -
> - DRM_DEBUG_KMS("\n");
> -
> - if (is_cmd_mode(intel_dsi)) {
> - for_each_dsi_port(port, intel_dsi->ports)
> - I915_WRITE(MIPI_MAX_RETURN_PKT_SIZE(port), 8 * 4);
> - } else {
> - msleep(20); /* XXX */
> - for_each_dsi_port(port, intel_dsi->ports)
> - dpi_send_cmd(intel_dsi, TURN_ON, false, port);
> - msleep(100);
> -
> - drm_panel_enable(intel_dsi->panel);
> -
> - intel_dsi_port_enable(encoder);
> - }
> -
> - intel_panel_enable_backlight(intel_dsi->attached_connector);
> -}
> -
> static void intel_dsi_prepare(struct intel_encoder *intel_encoder,
> struct intel_crtc_state *pipe_config);
>
> @@ -540,6 +514,7 @@ static void intel_dsi_pre_enable(struct intel_encoder
> *encoder,
> {
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> + enum port port;
> u32 val;
>
> DRM_DEBUG_KMS("\n");
> @@ -586,7 +561,21 @@ static void intel_dsi_pre_enable(struct intel_encoder
> *encoder,
>
> /* Enable port in pre-enable phase itself because as per hw team
> * recommendation, port should be enabled befor plane & pipe */
> - intel_dsi_enable(encoder);
> + if (is_cmd_mode(intel_dsi)) {
> + for_each_dsi_port(port, intel_dsi->ports)
> + I915_WRITE(MIPI_MAX_RETURN_PKT_SIZE(port), 8 * 4);
> + } else {
> + msleep(20); /* XXX */
> + for_each_dsi_port(port, intel_dsi->ports)
> + dpi_send_cmd(intel_dsi, TURN_ON, false, port);
> + msleep(100);
> +
> + drm_panel_enable(intel_dsi->panel);
> +
> + intel_dsi_port_enable(encoder);
> + }
> +
> + intel_panel_enable_backlight(intel_dsi->attached_connector);
> }
>
> static void intel_dsi_enable_nop(struct intel_encoder *encoder,
> @@ -631,42 +620,6 @@ static void intel_dsi_pre_disable(struct intel_encoder
> *encoder,
> }
> }
>
> -static void intel_dsi_disable(struct intel_encoder *encoder)
> -{
> - struct drm_device *dev = encoder->base.dev;
> - struct drm_i915_private *dev_priv = to_i915(dev);
> - struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> - enum port port;
> - u32 temp;
> -
> - DRM_DEBUG_KMS("\n");
> -
> - if (is_vid_mode(intel_dsi)) {
> - for_each_dsi_port(port, intel_dsi->ports)
> - wait_for_dsi_fifo_empty(intel_dsi, port);
I realize that this is just moving the code around and the change seems
reasonable. So this is
Reviewed-by: Bob Paauwe <bob.j.paa...@intel.com>
But if I'm understanding the b-spec correctly, at least for BXT, the
wait for fifo empty above should only be necessary for command mode,
not video mode.
> -
> - intel_dsi_port_disable(encoder);
> - msleep(2);
> - }
> -
> - for_each_dsi_port(port, intel_dsi->ports) {
> - /* Panel commands can be sent when clock is in LP11 */
> - I915_WRITE(MIPI_DEVICE_READY(port), 0x0);
> -
> - intel_dsi_reset_clocks(encoder, port);
> - I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP);
> -
> - temp = I915_READ(MIPI_DSI_FUNC_PRG(port));
> - temp &= ~VID_MODE_FORMAT_MASK;
> - I915_WRITE(MIPI_DSI_FUNC_PRG(port), temp);
> -
> - I915_WRITE(MIPI_DEVICE_READY(port), 0x1);
> - }
> - /* if disable packets are sent before sending shutdown packet then in
> - * some next enable sequence send turn on packet error is observed */
> - drm_panel_disable(intel_dsi->panel);
> -}
> -
> static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
> {
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> @@ -716,11 +669,38 @@ static void intel_dsi_post_disable(struct intel_encoder
> *encoder,
> {
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> + enum port port;
> u32 val;
>
> DRM_DEBUG_KMS("\n");
>
> - intel_dsi_disable(encoder);
> + if (is_vid_mode(intel_dsi)) {
> + for_each_dsi_port(port, intel_dsi->ports)
> + wait_for_dsi_fifo_empty(intel_dsi, port);
> +
> + intel_dsi_port_disable(encoder);
> + usleep_range(2000, 5000);
> + }
> +
> + for_each_dsi_port(port, intel_dsi->ports) {
> + /* Panel commands can be sent when clock is in LP11 */
> + I915_WRITE(MIPI_DEVICE_READY(port), 0x0);
> +
> + intel_dsi_reset_clocks(encoder, port);
> + I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP);
> +
> + val = I915_READ(MIPI_DSI_FUNC_PRG(port));
> + val &= ~VID_MODE_FORMAT_MASK;
> + I915_WRITE(MIPI_DSI_FUNC_PRG(port), val);
> +
> + I915_WRITE(MIPI_DEVICE_READY(port), 0x1);
> + }
> +
> + /*
> + * if disable packets are sent before sending shutdown packet then in
> + * some next enable sequence send turn on packet error is observed
> + */
> + drm_panel_disable(intel_dsi->panel);
>
> intel_dsi_clear_device_ready(encoder);
>
--
--
Bob Paauwe
bob.j.paa...@intel.com
IOTG / PED Software Organization
Intel Corp. Folsom, CA
(916) 356-6193
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
