On Wed, 2018-06-13 at 15:23 -0700, Lucas De Marchi wrote:
> On Tue, May 29, 2018 at 05:04:58PM -0700, Lucas De Marchi wrote:
> >
> > On Thu, May 24, 2018 at 05:43:24PM -0700, Lucas De Marchi wrote:
> > >
> > > On Thu, May 24, 2018 at 05:45:43PM -0700, Dhinakaran Pandiyan
> > > wrote:
> > > >
> > > > On Thu, 2018-05-24 at 16:53 -0700, Lucas De Marchi wrote:
> > > > >
> > > > > On Mon, May 21, 2018 at 05:25:39PM -0700, Paulo Zanoni wrote:
> > > > > >
> > > > > >
> > > > > > From: Anusha Srivatsa <anusha.sriva...@intel.com>
> > > > > >
> > > > > > This patch addresses Interrupts from south display engine
> > > > > > (SDE).
> > > > > >
> > > > > > ICP has two registers - SHOTPLUG_CTL_DDI and
> > > > > > SHOTPLUG_CTL_TC.
> > > > > > Introduce these registers and their intended values.
> > > > > >
> > > > > > Introduce icp_irq_handler().
> > > > > >
> > > > > > Cc: Paulo Zanoni <paulo.r.zan...@intel.com>
> > > > > > Cc: Dhinakaran Pandiyan <dhinakaran.pandi...@intel.com>
> > > > > > Cc: Ville Syrjala <ville.syrj...@linux.intel.com>
> > > > > > Signed-off-by: Anusha Srivatsa <anusha.sriva...@intel.com>
> > > > > > [Paulo: coding style bikesheds and rebases].
> > > > > > Signed-off-by: Paulo Zanoni <paulo.r.zan...@intel.com>
> > > > > > ---
> > > > > > drivers/gpu/drm/i915/i915_irq.c | 134
> > > > > > +++++++++++++++++++++++++++++++++++++++-
> > > > > > drivers/gpu/drm/i915/i915_reg.h | 40 ++++++++++++
> > > > > > 2 files changed, 172 insertions(+), 2 deletions(-)
> > > > > >
> > > > > > diff --git a/drivers/gpu/drm/i915/i915_irq.c
> > > > > > b/drivers/gpu/drm/i915/i915_irq.c
> > > > > > index 9bcec5fdb9d0..6b109991786f 100644
> > > > > > --- a/drivers/gpu/drm/i915/i915_irq.c
> > > > > > +++ b/drivers/gpu/drm/i915/i915_irq.c
> > > > > > @@ -122,6 +122,15 @@ static const u32
> > > > > > hpd_tc_gen11[HPD_NUM_PINS] =
> > > > > > {
> > > > > > [HPD_PORT_F] = GEN11_TC4_HOTPLUG
> > > > > > };
> > > > > >
> > > > > > +static const u32 hpd_icp[HPD_NUM_PINS] = {
> > > > > > + [HPD_PORT_A] = ICP_DDIA_HOTPLUG,
> > > > > > + [HPD_PORT_B] = ICP_DDIB_HOTPLUG,
> > > > > > + [HPD_PORT_C] = ICP_TC1_HOTPLUG,
> > > > > > + [HPD_PORT_D] = ICP_TC2_HOTPLUG,
> > > > > > + [HPD_PORT_E] = ICP_TC3_HOTPLUG,
> > > > > > + [HPD_PORT_F] = ICP_TC4_HOTPLUG
> > > > > > +};
> > > > > > +
> > > > > > /* IIR can theoretically queue up two events. Be paranoid.
> > > > > > */
> > > > > > #define GEN8_IRQ_RESET_NDX(type, which) do { \
> > > > > > I915_WRITE(GEN8_##type##_IMR(which), 0xffffffff);
> > > > > > \
> > > > > > @@ -1586,6 +1595,34 @@ static bool
> > > > > > bxt_port_hotplug_long_detect(enum port port, u32 val)
> > > > > > }
> > > > > > }
> > > > > >
> > > > > > +static bool icp_ddi_port_hotplug_long_detect(enum port
> > > > > > port, u32
> > > > > > val)
> > > > > > +{
> > > > > > + switch (port) {
> > > > > > + case PORT_A:
> > > > > > + return val & ICP_DDIA_HPD_LONG_DETECT;
> > > > > > + case PORT_B:
> > > > > > + return val & ICP_DDIB_HPD_LONG_DETECT;
> > > > > > + default:
> > > > > > + return false;
> > > > > > + }
> > > > > > +}
> > > > > > +
> > > > > > +static bool icp_tc_port_hotplug_long_detect(enum port
> > > > > > port, u32
> > > > > > val)
> > > > > > +{
> > > > > > + switch (port) {
> > > > > > + case PORT_C:
> > > > > > + return val &
> > > > > > ICP_TC_HPD_LONG_DETECT(PORT_TC1);
> > > > > > + case PORT_D:
> > > > > > + return val &
> > > > > > ICP_TC_HPD_LONG_DETECT(PORT_TC2);
> > > > > > + case PORT_E:
> > > > > > + return val &
> > > > > > ICP_TC_HPD_LONG_DETECT(PORT_TC3);
> > > > > > + case PORT_F:
> > > > > > + return val &
> > > > > > ICP_TC_HPD_LONG_DETECT(PORT_TC4);
> > > > > > + default:
> > > > > > + return false;
> > > > > > + }
> > > > > > +}
> > > > > > +
> > > > > > static bool spt_port_hotplug2_long_detect(enum port port,
> > > > > > u32 val)
> > > > > > {
> > > > > > switch (port) {
> > > > > > @@ -2377,6 +2414,43 @@ static void cpt_irq_handler(struct
> > > > > > drm_i915_private *dev_priv, u32 pch_iir)
> > > > > > cpt_serr_int_handler(dev_priv);
> > > > > > }
> > > > > >
> > > > > > +static void icp_irq_handler(struct drm_i915_private
> > > > > > *dev_priv, u32
> > > > > > pch_iir)
> > > > > > +{
> > > > > > + u32 ddi_hotplug_trigger = pch_iir &
> > > > > > ICP_SDE_DDI_MASK;
> > > > > > + u32 tc_hotplug_trigger = pch_iir &
> > > > > > ICP_SDE_TC_MASK;
> > > > > > + u32 pin_mask = 0, long_mask = 0;
> > > > > > +
> > > > > > + if (ddi_hotplug_trigger) {
> > > > > > + u32 dig_hotplug_reg;
> > > > > > +
> > > > > > + dig_hotplug_reg =
> > > > > > I915_READ(SHOTPLUG_CTL_DDI);
> > > > > > + I915_WRITE(SHOTPLUG_CTL_DDI,
> > > > > > dig_hotplug_reg);
> > > > > > +
> > > > > > + intel_get_hpd_pins(dev_priv, &pin_mask,
> > > > > > &long_mask,
> > > > > > + ddi_hotplug_trigger,
> > > > > > + dig_hotplug_reg,
> > > > > > hpd_icp,
> > > > > > + icp_ddi_port_hotplug_lo
> > > > > > ng_detec
> > > > > > t);
> > > > > > + }
> > > > > > +
> > > > > > + if (tc_hotplug_trigger) {
> > > > > > + u32 dig_hotplug_reg;
> > > > > > +
> > > > > > + dig_hotplug_reg =
> > > > > > I915_READ(SHOTPLUG_CTL_TC);
> > > > > > + I915_WRITE(SHOTPLUG_CTL_TC,
> > > > > > dig_hotplug_reg);
> > > > > > +
> > > > > > + intel_get_hpd_pins(dev_priv, &pin_mask,
> > > > > > &long_mask,
> > > > > > + tc_hotplug_trigger,
> > > > > > + dig_hotplug_reg,
> > > > > > hpd_icp,
> > > > > > + icp_tc_port_hotplug_lon
> > > > > > g_detect
> > > > > > );
> > > > > > + }
> > > > > > +
> > > > > > + if (pin_mask)
> > > > > > + intel_hpd_irq_handler(dev_priv, pin_mask,
> > > > > > long_mask);
> > > > > > +
> > > > > > + if (pch_iir & ICP_GMBUS)
> > > > > > + gmbus_irq_handler(dev_priv);
> > > > > > +}
> > > > > > +
> > > > > > static void spt_irq_handler(struct drm_i915_private
> > > > > > *dev_priv, u32
> > > > > > pch_iir)
> > > > > > {
> > > > > > u32 hotplug_trigger = pch_iir &
> > > > > > SDE_HOTPLUG_MASK_SPT &
> > > > > > @@ -2779,8 +2853,11 @@ gen8_de_irq_handler(struct
> > > > > > drm_i915_private
> > > > > > *dev_priv, u32 master_ctl)
> > > > > > I915_WRITE(SDEIIR, iir);
> > > > > > ret = IRQ_HANDLED;
> > > > > >
> > > > > > - if (HAS_PCH_SPT(dev_priv) ||
> > > > > > HAS_PCH_KBP(dev_priv) ||
> > > > > > - HAS_PCH_CNP(dev_priv))
> > > > > > + if (HAS_PCH_ICP(dev_priv))
> > > > > > + icp_irq_handler(dev_priv,
> > > > > > iir);
> > to be clear on what I was saying... See the context just above: we
> > read
> > and write SDEIIR to get/clear the interrupt bits. Yet you are
> > defining a
> > ICP_SDE_IIR that has to be the same value. To avoid any confusion,
> > I
> > think it's better to stay with SDEIIR and just change the bit
> > definition.
> Dk, any news on this?
SDEIIR is fine by me. The patch author has to make the required
changes, I just reviewed the patch :)
>
> Lucas De Marchi
>
> >
> >
> >
> > >
> > > >
> > > > >
> > > > > >
> > > > > > + else if (HAS_PCH_SPT(dev_priv) ||
> > > > > > + HAS_PCH_KBP(dev_priv) ||
> > > > > > + HAS_PCH_CNP(dev_priv))
> > > > > > spt_irq_handler(dev_priv,
> > > > > > iir);
> > > > > > else
> > > > > > cpt_irq_handler(dev_priv,
> > > > > > iir);
> > > > > > @@ -3548,6 +3625,9 @@ static void gen11_irq_reset(struct
> > > > > > drm_device
> > > > > > *dev)
> > > > > > GEN3_IRQ_RESET(GEN11_DE_HPD_);
> > > > > > GEN3_IRQ_RESET(GEN11_GU_MISC_);
> > > > > > GEN3_IRQ_RESET(GEN8_PCU_);
> > > > > > +
> > > > > > + if (HAS_PCH_ICP(dev_priv))
> > > > > > + GEN3_IRQ_RESET(ICP_SDE_);
> > > > > > }
> > > > > >
> > > > > > void gen8_irq_power_well_post_enable(struct
> > > > > > drm_i915_private
> > > > > > *dev_priv,
> > > > > > @@ -3664,6 +3744,35 @@ static void ibx_hpd_irq_setup(struct
> > > > > > drm_i915_private *dev_priv)
> > > > > > ibx_hpd_detection_setup(dev_priv);
> > > > > > }
> > > > > >
> > > > > > +static void icp_hpd_detection_setup(struct
> > > > > > drm_i915_private
> > > > > > *dev_priv)
> > > > > > +{
> > > > > > + u32 hotplug;
> > > > > > +
> > > > > > + hotplug = I915_READ(SHOTPLUG_CTL_DDI);
> > > > > > + hotplug |= ICP_DDIA_HPD_ENABLE |
> > > > > > + ICP_DDIB_HPD_ENABLE;
> > > > > > + I915_WRITE(SHOTPLUG_CTL_DDI, hotplug);
> > > > > > +
> > > > > > + hotplug = I915_READ(SHOTPLUG_CTL_TC);
> > > > > > + hotplug |= ICP_TC_HPD_ENABLE(PORT_TC1) |
> > > > > > + ICP_TC_HPD_ENABLE(PORT_TC2) |
> > > > > > + ICP_TC_HPD_ENABLE(PORT_TC3) |
> > > > > > + ICP_TC_HPD_ENABLE(PORT_TC4);
> > > > > > + I915_WRITE(SHOTPLUG_CTL_TC, hotplug);
> > > > > > +}
> > > > > > +
> > > > > > +static void icp_hpd_irq_setup(struct drm_i915_private
> > > > > > *dev_priv)
> > > > > > +{
> > > > > > + u32 hotplug_irqs, enabled_irqs;
> > > > > > +
> > > > > > + hotplug_irqs = ICP_SDE_DDI_MASK | ICP_SDE_TC_MASK;
> > > > > > + enabled_irqs = intel_hpd_enabled_irqs(dev_priv,
> > > > > > hpd_icp);
> > > > > > +
> > > > > > + ibx_display_interrupt_update(dev_priv,
> > > > > > hotplug_irqs,
> > > > > > enabled_irqs);
> > > > > > +
> > > > > > + icp_hpd_detection_setup(dev_priv);
> > > > > > +}
> > > > > > +
> > > > > > static void gen11_hpd_detection_setup(struct
> > > > > > drm_i915_private
> > > > > > *dev_priv)
> > > > > > {
> > > > > > u32 hotplug;
> > > > > > @@ -3690,6 +3799,9 @@ static void
> > > > > > gen11_hpd_irq_setup(struct
> > > > > > drm_i915_private *dev_priv)
> > > > > > POSTING_READ(GEN11_DE_HPD_IMR);
> > > > > >
> > > > > > gen11_hpd_detection_setup(dev_priv);
> > > > > > +
> > > > > > + if (HAS_PCH_ICP(dev_priv))
> > > > > > + icp_hpd_irq_setup(dev_priv);
> > > > > > }
> > > > > >
> > > > > > static void spt_hpd_detection_setup(struct
> > > > > > drm_i915_private
> > > > > > *dev_priv)
> > > > > > @@ -4121,11 +4233,29 @@ static void
> > > > > > gen11_gt_irq_postinstall(struct
> > > > > > drm_i915_private *dev_priv)
> > > > > > I915_WRITE(GEN11_GPM_WGBOXPERF_INTR_MASK, ~0);
> > > > > > }
> > > > > >
> > > > > > +static void icp_irq_postinstall(struct drm_device *dev)
> > > > > > +{
> > > > > > + struct drm_i915_private *dev_priv = to_i915(dev);
> > > > > > + u32 mask = ICP_GMBUS;
> > > > > > +
> > > > > > + WARN_ON(I915_READ(ICP_SDE_IER) != 0);
> > > > > > + I915_WRITE(ICP_SDE_IER, 0xffffffff);
> > > > > > + POSTING_READ(ICP_SDE_IER);
> > > > > > +
> > > > > > + gen3_assert_iir_is_zero(dev_priv, ICP_SDE_IIR);
> > > > > > + I915_WRITE(ICP_SDE_IMR, ~mask);
> > > > > > +
> > > > > > + icp_hpd_detection_setup(dev_priv);
> > > > > > +}
> > > > > > +
> > > > > > static int gen11_irq_postinstall(struct drm_device *dev)
> > > > > > {
> > > > > > struct drm_i915_private *dev_priv = dev-
> > > > > > >dev_private;
> > > > > > u32 gu_misc_masked = GEN11_GU_MISC_GSE;
> > > > > >
> > > > > > + if (HAS_PCH_ICP(dev_priv))
> > > > > > + icp_irq_postinstall(dev);
> > > > > > +
> > > > > > gen11_gt_irq_postinstall(dev_priv);
> > > > > > gen8_de_irq_postinstall(dev_priv);
> > > > > >
> > > > > > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > > > > > b/drivers/gpu/drm/i915/i915_reg.h
> > > > > > index 19600097581f..28ce96ce0484 100644
> > > > > > --- a/drivers/gpu/drm/i915/i915_reg.h
> > > > > > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > > > > > @@ -7460,6 +7460,46 @@ enum {
> > > > > > #define PORTE_HOTPLUG_SHORT_DETECT (1 << 0)
> > > > > > #define PORTE_HOTPLUG_LONG_DETECT (2 << 0)
> > > > > >
> > > > > > +/* ICP */
> > > > > > +#define ICP_SDE_ISR _MMIO(0xc4000)
> > > > > > +#define ICP_SDE_IMR _MMIO(0xc4004)
> > > > > > +#define ICP_SDE_IIR _MMIO(0xc4008)
> > > > > > +#define ICP_SDE_IER _MMIO(0xc400c)
> > > > > These are exactly the same registers as SDE{ISR,IMR,IIR,IER}.
> > > > > For all
> > > > > the other platforms what we do is rather postfix the platform
> > > > > name.
> > > > >
> > > > > I think we should follow what they do here.
> > > > >
> > > > >
> > > > > >
> > > > > >
> > > > > > +#define ICP_TC4_HOTPLUG (1 << 27)
> > > > > > +#define ICP_TC3_HOTPLUG (1 << 26)
> > > > > > +#define ICP_TC2_HOTPLUG (1 << 25)
> > > > > > +#define ICP_TC1_HOTPLUG (1 << 24)
> > > > > > +#define ICP_GMBUS (1 << 23)
> > > > > > +#define ICP_DDIB_HOTPLUG (1 << 17)
> > > > > > +#define ICP_DDIA_HOTPLUG (1 << 16)
> > > > > so these would become SDE_TC4_HOTPLUG_ICP and so on.
> > > > >
> > > > The reason I preferred this naming for gen-11 is it is
> > > > symmetric to the
> > > > corresponding definitions in the north engine.
> > > >
> > > > For example,
> > > > +#define GEN11_DE_HPD_ISR _MMIO(0x44470)
> > > > +#define GEN11_DE_HPD_IMR _MMIO(0x44474)
> > > > +#define GEN11_DE_HPD_IIR _MMIO(0x44478)
> > > > +#define GEN11_DE_HPD_IER _MMIO(0x4447c)
> > > > +#define GEN11_TC4_HOTPLUG (1 << 19)
> > > > +#define GEN11_TC3_HOTPLUG (1 << 18)
> > > > +#define GEN11_TC2_HOTPLUG (1 << 17)
> > > > +#define GEN11_TC1_HOTPLUG (1 << 16)
> > > >
> > > > With interrupts getting routed to north or south engines for
> > > > the same
> > > > port, this naming scheme makes the duality clearer IMO.
> > > Still the register is the same as SDEISR and there are places in
> > > which we
> > > read it expecting to be the same number.
> > >
> > > Only the bits are different, so name the bits differently as it
> > > is for
> > > other platforms. I think of the symmetry here just and accident
> > > of
> > > life expecting to be different if north and south engines don't
> > > have the
> > > same ports.
> > This is on gen8_de_irq_handler() which is still used for gen11.
> >
> > Lucas De Marchi
> >
> > >
> > >
> > > Lucas De Marchi
> > >
> > > >
> > > >
> > > >
> > > > >
> > > > > >
> > > > > >
> > > > > > +
> > > > > > +#define ICP_SDE_DDI_MASK (ICP_DDIB_HOTPLUG
> > > > > > |
> > > > > > \
> > > > > > + ICP_DDIA_HOTPLUG)
> > > > > > +
> > > > > > +#define ICP_SDE_TC_MASK (ICP_TC4_HO
> > > > > > TPLUG |
> > > > > > \
> > > > > > + ICP_TC3_HOTPLUG |
> > > > > >
> > > > > > \
> > > > > > + ICP_TC2_HOTPLUG |
> > > > > >
> > > > > > \
> > > > > > + ICP_TC1_HOTPLUG)
> > > > > > +
> > > > > > +#define SHOTPLUG_CTL_DDI _MMIO(0xc4
> > > > > > 030)
> > > > > > /* SHOTPLUG_CTL */
> > > > > This also seems to reuse what we have defined as
> > > > > PCH_PORT_HOTPLUG
> > > > > with a
> > > > > comment to SHOTPLUG_CTL there, although here I tend to be in
> > > > > favor of
> > > > > using the current real name of the register (SHOTPLUG_CTL).
> > > > The real name I see is SHOTPLUG_CTL_DDI for ICP.
> > > >
> > > > I don't believe we should attempt to make these definitions
> > > > consistent
> > > > with previous platforms over making them consistent with each
> > > > other.
> > > >
If you want to retain the original definition PCH_HOTPLUG, appending to
the existing comment that the register is called SHOTPLUG_CTL_DDI on
ICP would be nice.
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
