On Wed, 2013-06-05 at 13:34 +0200, Daniel Vetter wrote:
> Now that we have the proper pipe config to track this, we don't need
> to write any registers any more.
>
> v2: Drop a few now unnecessary local variables and switch the enable
> function to take a struct intel_crtc * to simply arguments.
>
> Signed-off-by: Daniel Vetter <daniel.vet...@ffwll.ch>
> ---
> drivers/gpu/drm/i915/intel_display.c | 102
> +++++++++++++----------------------
> 1 file changed, 37 insertions(+), 65 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index b9be047..b6f5e48 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -1298,32 +1298,48 @@ static void vlv_enable_pll(struct drm_i915_private
> *dev_priv, enum pipe pipe)
> udelay(150); /* wait for warmup */
> }
>
> -static void i9xx_enable_pll(struct drm_i915_private *dev_priv, enum pipe
> pipe)
> +static void i9xx_enable_pll(struct intel_crtc *crtc)
> {
> - int reg;
> - u32 val;
> + struct drm_device *dev = crtc->base.dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + int reg = DPLL(crtc->pipe);
> + u32 dpll = crtc->config.dpll_hw_state.dpll;
>
> - assert_pipe_disabled(dev_priv, pipe);
> + assert_pipe_disabled(dev_priv, crtc->pipe);
>
> /* No really, not for ILK+ */
> - BUG_ON(!IS_VALLEYVIEW(dev_priv->dev) && dev_priv->info->gen >= 5);
> + BUG_ON(!IS_VALLEYVIEW(dev) && dev_priv->info->gen >= 5);
>
> /* PLL is protected by panel, make sure we can write it */
> - if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev))
> - assert_panel_unlocked(dev_priv, pipe);
> + if (IS_MOBILE(dev) && !IS_I830(dev))
> + assert_panel_unlocked(dev_priv, crtc->pipe);
>
> - reg = DPLL(pipe);
> - val = I915_READ(reg);
> - val |= DPLL_VCO_ENABLE;
> + I915_WRITE(reg, dpll);
> +
> + /* Wait for the clocks to stabilize. */
> + POSTING_READ(reg);
> + udelay(150);
> +
> + if (INTEL_INFO(dev)->gen >= 4) {
> + I915_WRITE(DPLL_MD(crtc->pipe),
> + crtc->config.dpll_hw_state.dpll_md);
> + } else {
> + /* The pixel multiplier can only be updated once the
> + * DPLL is enabled and the clocks are stable.
> + *
> + * So write it again.
> + */
> + I915_WRITE(reg, dpll);
It's ok but isn't really needed any more as now we write dpll right
after this with the same value.
> + }
>
> /* We do this three times for luck */
> - I915_WRITE(reg, val);
> + I915_WRITE(reg, dpll);
> POSTING_READ(reg);
> udelay(150); /* wait for warmup */
> - I915_WRITE(reg, val);
> + I915_WRITE(reg, dpll);
> POSTING_READ(reg);
> udelay(150); /* wait for warmup */
> - I915_WRITE(reg, val);
> + I915_WRITE(reg, dpll);
> POSTING_READ(reg);
> udelay(150); /* wait for warmup */
> }
> @@ -3591,7 +3607,11 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
> intel_crtc->active = true;
> intel_update_watermarks(dev);
>
> - i9xx_enable_pll(dev_priv, pipe);
> + for_each_encoder_on_crtc(dev, crtc, encoder)
> + if (encoder->pre_pll_enable)
> + encoder->pre_pll_enable(encoder);
> +
> + i9xx_enable_pll(intel_crtc);
>
> for_each_encoder_on_crtc(dev, crtc, encoder)
> if (encoder->pre_enable)
> @@ -4429,8 +4449,6 @@ static void i9xx_update_pll(struct intel_crtc *crtc,
> {
> struct drm_device *dev = crtc->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> - struct intel_encoder *encoder;
> - int pipe = crtc->pipe;
> u32 dpll;
> bool is_sdvo;
> struct dpll *clock = &crtc->config.dpll;
> @@ -4494,37 +4512,14 @@ static void i9xx_update_pll(struct intel_crtc *crtc,
> dpll |= DPLL_VCO_ENABLE;
> crtc->config.dpll_hw_state.dpll = dpll;
>
> - I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
> - POSTING_READ(DPLL(pipe));
> - udelay(150);
> -
> - for_each_encoder_on_crtc(dev, &crtc->base, encoder)
> - if (encoder->pre_pll_enable)
> - encoder->pre_pll_enable(encoder);
> -
> - if (crtc->config.has_dp_encoder)
> - intel_dp_set_m_n(crtc);
> -
> - I915_WRITE(DPLL(pipe), dpll);
> -
> - /* Wait for the clocks to stabilize. */
> - POSTING_READ(DPLL(pipe));
> - udelay(150);
> -
> if (INTEL_INFO(dev)->gen >= 4) {
> u32 dpll_md = (crtc->config.pixel_multiplier - 1)
> << DPLL_MD_UDI_MULTIPLIER_SHIFT;
> crtc->config.dpll_hw_state.dpll_md = dpll_md;
> -
> - I915_WRITE(DPLL_MD(pipe), dpll_md);
> - } else {
> - /* The pixel multiplier can only be updated once the
> - * DPLL is enabled and the clocks are stable.
> - *
> - * So write it again.
> - */
> - I915_WRITE(DPLL(pipe), dpll);
> }
> +
> + if (crtc->config.has_dp_encoder)
> + intel_dp_set_m_n(crtc);
> }
>
> static void i8xx_update_pll(struct intel_crtc *crtc,
> @@ -4533,8 +4528,6 @@ static void i8xx_update_pll(struct intel_crtc *crtc,
> {
> struct drm_device *dev = crtc->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> - struct intel_encoder *encoder;
> - int pipe = crtc->pipe;
> u32 dpll;
> struct dpll *clock = &crtc->config.dpll;
>
> @@ -4561,27 +4554,6 @@ static void i8xx_update_pll(struct intel_crtc *crtc,
>
> dpll |= DPLL_VCO_ENABLE;
> crtc->config.dpll_hw_state.dpll = dpll;
> -
> - I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
> - POSTING_READ(DPLL(pipe));
> - udelay(150);
> -
> - for_each_encoder_on_crtc(dev, &crtc->base, encoder)
> - if (encoder->pre_pll_enable)
> - encoder->pre_pll_enable(encoder);
> -
> - I915_WRITE(DPLL(pipe), dpll);
> -
> - /* Wait for the clocks to stabilize. */
> - POSTING_READ(DPLL(pipe));
> - udelay(150);
> -
> - /* The pixel multiplier can only be updated once the
> - * DPLL is enabled and the clocks are stable.
> - *
> - * So write it again.
> - */
> - I915_WRITE(DPLL(pipe), dpll);
> }
>
> static void intel_set_pipe_timings(struct intel_crtc *intel_crtc)
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
