On Mon, 2020-10-12 at 17:18 +0300, Gwan-gyeong Mun wrote:
> As per b.spec 49274, the IO buffer Wake lines and Fast Wake lines can be
> calculated based on the following formula.
>
> IO buffer wake lines = ROUNDUP(50us / total line time in us)
> Fast wake lines = ROUNDUP(32us / total line time in us)
> For both fields limit the minimum to 7 lines and maximum to 12 lines
>
> It calculates IO buffer Wake and Fast Wake based on b.spec 49274 and
> programs it.
>
> Cc: José Roberto de Souza <jose.so...@intel.com>
> Cc: Lee Shawn C <shawn.c....@intel.com>
> Signed-off-by: Gwan-gyeong Mun <gwan-gyeong....@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_psr.c | 67 +++++++++++++++++++-----
> drivers/gpu/drm/i915/i915_drv.h | 2 +
> drivers/gpu/drm/i915/i915_reg.h | 4 ++
> 3 files changed, 61 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_psr.c
> b/drivers/gpu/drm/i915/display/intel_psr.c
> index 8a9d0bdde1bf..36b397acddb3 100644
> --- a/drivers/gpu/drm/i915/display/intel_psr.c
> +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> @@ -538,19 +538,15 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
> val |= intel_psr2_get_tp_time(intel_dp);
>
>
>
>
>
>
>
>
> if (INTEL_GEN(dev_priv) >= 12) {
> - /*
> - * TODO: 7 lines of IO_BUFFER_WAKE and FAST_WAKE are default
> - * values from BSpec. In order to setting an optimal power
> - * consumption, lower than 4k resoluition mode needs to decrese
> - * IO_BUFFER_WAKE and FAST_WAKE. And higher than 4K resolution
> - * mode needs to increase IO_BUFFER_WAKE and FAST_WAKE.
> - */
> - val |= TGL_EDP_PSR2_BLOCK_COUNT_NUM_2;
> - val |= TGL_EDP_PSR2_IO_BUFFER_WAKE(7);
> - val |= TGL_EDP_PSR2_FAST_WAKE(7);
> + if (dev_priv->psr.io_buffer_wake < 9 || dev_priv->psr.fast_wake
> < 9)
> + val |= TGL_EDP_PSR2_BLOCK_COUNT_NUM_2;
> + else
> + val |= TGL_EDP_PSR2_BLOCK_COUNT_NUM_3;
> + val |=
> TGL_EDP_PSR2_IO_BUFFER_WAKE(dev_priv->psr.io_buffer_wake);
> + val |= TGL_EDP_PSR2_FAST_WAKE(dev_priv->psr.fast_wake);
> } else if (INTEL_GEN(dev_priv) >= 9) {
> - val |= EDP_PSR2_IO_BUFFER_WAKE(7);
> - val |= EDP_PSR2_FAST_WAKE(7);
> + val |= EDP_PSR2_IO_BUFFER_WAKE(dev_priv->psr.io_buffer_wake);
> + val |= EDP_PSR2_FAST_WAKE(dev_priv->psr.fast_wake);
> }
>
>
>
>
>
>
>
>
> if (dev_priv->psr.psr2_sel_fetch_enabled) {
> @@ -810,6 +806,8 @@ void intel_psr_compute_config(struct intel_dp *intel_dp,
> const struct drm_display_mode *adjusted_mode =
> &crtc_state->hw.adjusted_mode;
> int psr_setup_time;
> + u32 io_buffer_wake = EDP_PSR2_IO_BUFFER_WAKE_MIN_LINES;
> + u32 fast_wake = EDP_PSR2_FAST_WAKE_MIN_LINES;
Those values set will always be overwritten, so should not be initialized.
>
>
>
>
>
>
>
>
> if (!CAN_PSR(dev_priv))
> return;
> @@ -859,6 +857,51 @@ void intel_psr_compute_config(struct intel_dp *intel_dp,
> return;
> }
>
>
>
>
>
>
All of the bellow should be in intel_psr2_config_valid()
> + /*
> + * B.Spec 49274
> + * IO buffer wake lines = ROUNDUP(50us / total line time in us)
> + * Fast wake lines = ROUNDUP(32us / total line time in us)
> + * For both fields limit the minimum to 7 lines and maximum to 12 lines
> + */
I always thought that the calculation here would use skl_wm_params->linetime_us.
io_buffer_wake = DIV_ROUND_UP(50, dev_priv->psr.wm_linetime_usec);
+ Ville here
> + io_buffer_wake =
> intel_usecs_to_scanlines(&crtc_state->uapi.adjusted_mode, 50);
> + fast_wake = intel_usecs_to_scanlines(&crtc_state->uapi.adjusted_mode,
> 32);
> +
> + if (INTEL_GEN(dev_priv) >= 12) {
> + if (io_buffer_wake < TGL_EDP_PSR2_IO_BUFFER_WAKE_MIN_LINES ||
> + io_buffer_wake > TGL_EDP_PSR2_IO_BUFFER_WAKE_MAX_LINES) {
> + drm_dbg_kms(&dev_priv->drm,
> + "PSR condition failed: Invalid PSR2 IO
> Buffer Wake lines (%d)\n",
> + io_buffer_wake);
Moving to intel_psr2_config_valid() you can still allow PSR1 to be enabled.
> + return;
> + }
> +
> + if (fast_wake < TGL_EDP_PSR2_FAST_WAKE_MIN_LINES ||
> + fast_wake > TGL_EDP_PSR2_FAST_WAKE_MAX_LINES) {
> + drm_dbg_kms(&dev_priv->drm,
> + "PSR condition failed: Invalid PSR2 FAST
> Wake lines (%d)\n",
> + fast_wake);
> + return;
> + }
> + } else if (INTEL_GEN(dev_priv) >= 9) {
> + if (io_buffer_wake < EDP_PSR2_IO_BUFFER_WAKE_MIN_LINES ||
> + io_buffer_wake > EDP_PSR2_IO_BUFFER_WAKE_MAX_LINES) {
> + drm_dbg_kms(&dev_priv->drm,
> + "PSR condition failed: Invalid PSR2 IO
> Buffer Wake lines (%d)\n",
> + io_buffer_wake);
> + return;
> + }
> +
> + if (fast_wake < EDP_PSR2_FAST_WAKE_MIN_LINES ||
> + fast_wake > EDP_PSR2_FAST_WAKE_MAX_LINES) {
> + drm_dbg_kms(&dev_priv->drm,
> + "PSR condition failed: Invalid PSR2 FAST
> Wake lines (%d)\n",
> + fast_wake);
> + return;
> + }
> + }
Reuse the code above for gen12+ and gen9+ doing something like we do for
psr_max_h/psr_max_w.
> + dev_priv->psr.io_buffer_wake = io_buffer_wake < 7 ? 7 : io_buffer_wake;
> + dev_priv->psr.fast_wake = fast_wake < 7 ? 7 : fast_wake;
Hardcoded. Please add those to i915_reg.h.
> +
> crtc_state->has_psr = true;
> crtc_state->has_psr2 = intel_psr2_config_valid(intel_dp, crtc_state);
> crtc_state->infoframes.enable |=
> intel_hdmi_infoframe_enable(DP_SDP_VSC);
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index eef9a821c49c..767066bc387c 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -508,6 +508,8 @@ struct i915_psr {
> struct delayed_work dc3co_work;
> bool force_mode_changed;
> struct drm_dp_vsc_sdp vsc;
> + u32 io_buffer_wake;
> + u32 fast_wake;
> };
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> #define QUIRK_LVDS_SSC_DISABLE (1<<1)
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 6ad9ee4243a0..8c98cdb8c438 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4547,14 +4547,18 @@ enum {
> #define EDP_MAX_SU_DISABLE_TIME(t) ((t) << 20)
> #define EDP_MAX_SU_DISABLE_TIME_MASK (0x1f << 20)
> #define EDP_PSR2_IO_BUFFER_WAKE_MAX_LINES 8
> +#define EDP_PSR2_IO_BUFFER_WAKE_MIN_LINES 5
> #define EDP_PSR2_IO_BUFFER_WAKE(lines)
> ((EDP_PSR2_IO_BUFFER_WAKE_MAX_LINES - (lines)) << 13)
> #define EDP_PSR2_IO_BUFFER_WAKE_MASK (3 << 13)
> +#define TGL_EDP_PSR2_IO_BUFFER_WAKE_MAX_LINES 12
> #define TGL_EDP_PSR2_IO_BUFFER_WAKE_MIN_LINES 5
> #define TGL_EDP_PSR2_IO_BUFFER_WAKE(lines) (((lines) -
> TGL_EDP_PSR2_IO_BUFFER_WAKE_MIN_LINES) << 13)
> #define TGL_EDP_PSR2_IO_BUFFER_WAKE_MASK (7 << 13)
> #define EDP_PSR2_FAST_WAKE_MAX_LINES 8
> +#define EDP_PSR2_FAST_WAKE_MIN_LINES 5
> #define EDP_PSR2_FAST_WAKE(lines) ((EDP_PSR2_FAST_WAKE_MAX_LINES
> - (lines)) << 11)
> #define EDP_PSR2_FAST_WAKE_MASK (3 << 11)
> +#define TGL_EDP_PSR2_FAST_WAKE_MAX_LINES 12
> #define TGL_EDP_PSR2_FAST_WAKE_MIN_LINES 5
> #define TGL_EDP_PSR2_FAST_WAKE(lines) (((lines) -
> TGL_EDP_PSR2_FAST_WAKE_MIN_LINES) << 10)
> #define TGL_EDP_PSR2_FAST_WAKE_MASK (7 << 10)
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
