On Fri, 2014-02-21 at 13:52 -0300, Paulo Zanoni wrote:
> From: Paulo Zanoni <paulo.r.zan...@intel.com>
>
> Otherwise we'll read registers that return 0xffffffff, trigger some
> WARNs, think CRT is actually connected (because certain bits are 1),
> and fail the drm-resources-equal testcase!
>
> Tested on a SNB machine with runtime PM support (which is not upstream
> yet, but is already on my public tree at freedesktop.org, and will
> hopefully eventually become upstream).
>
> Testcase: igt/pm_pc8/drm-resources-equal
> Signed-off-by: Paulo Zanoni <paulo.r.zan...@intel.com>
> ---
> drivers/gpu/drm/i915/intel_crt.c | 26 +++++++++++++++++++-------
> 1 file changed, 19 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_crt.c
> b/drivers/gpu/drm/i915/intel_crt.c
> index 9864aa1..4c1230c 100644
> --- a/drivers/gpu/drm/i915/intel_crt.c
> +++ b/drivers/gpu/drm/i915/intel_crt.c
> @@ -630,10 +630,13 @@ static enum drm_connector_status
> intel_crt_detect(struct drm_connector *connector, bool force)
> {
> struct drm_device *dev = connector->dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> struct intel_crt *crt = intel_attached_crt(connector);
> enum drm_connector_status status;
> struct intel_load_detect_pipe tmp;
>
> + intel_runtime_pm_get(dev_priv);
> +
> DRM_DEBUG_KMS("[CONNECTOR:%d:%s] force=%d\n",
> connector->base.id, drm_get_connector_name(connector),
> force);
> @@ -645,23 +648,30 @@ intel_crt_detect(struct drm_connector *connector, bool
> force)
> */
> if (intel_crt_detect_hotplug(connector)) {
> DRM_DEBUG_KMS("CRT detected via hotplug\n");
> - return connector_status_connected;
> + status = connector_status_connected;
> + goto out;
> } else
> DRM_DEBUG_KMS("CRT not detected via hotplug\n");
> }
>
> - if (intel_crt_detect_ddc(connector))
> - return connector_status_connected;
> + if (intel_crt_detect_ddc(connector)) {
> + status = connector_status_connected;
> + goto out;
> + }
>
> /* Load detection is broken on HPD capable machines. Whoever wants a
> * broken monitor (without edid) to work behind a broken kvm (that fails
> * to have the right resistors for HP detection) needs to fix this up.
> * For now just bail out. */
> - if (I915_HAS_HOTPLUG(dev))
> - return connector_status_disconnected;
> + if (I915_HAS_HOTPLUG(dev)) {
> + status = connector_status_disconnected;
> + goto out;
> + }
>
> - if (!force)
> - return connector->status;
> + if (!force) {
> + status = connector->status;
> + goto out;
> + }
>
> /* for pre-945g platforms use load detect */
> if (intel_get_load_detect_pipe(connector, NULL, &tmp)) {
> @@ -673,6 +683,8 @@ intel_crt_detect(struct drm_connector *connector, bool
> force)
> } else
> status = connector_status_unknown;
>
> +out:
> + intel_runtime_pm_put(dev_priv);
> return status;
> }Similarly to 04/11, this should be part of a power domain get/put for a new CRT power domain I added in the VLV power domain support patches. On top of those to solve this issue we'd also need to add an enable/disable handler for the HSW always-on power well, which would only do a hsw_disable_package_c8()/hsw_enable_package_c8(). --Imre
signature.asc
Description: This is a digitally signed message part
_______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx
