From: Akash Goel <akash.g...@intel.com>
Prior to SKL, the time period programmed in Up/Down EI & Up/Down
threshold registers was in units of 1.28 micro seconds. But for
SKL, the units have changed (1.333 micro seconds).
Have generalized the implementation of gen6_set_rps_thresholds function,
by removing the hard coding done in it as per 1.28 micro seconds.
v2: Renamed the local variables & removed superfluous comments (Chris)
Signed-off-by: Akash Goel <akash.g...@intel.com>
---
drivers/gpu/drm/i915/intel_pm.c | 68 +++++++++++++++++++----------------------
1 file changed, 32 insertions(+), 36 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 339a034..e094e5d 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3677,6 +3677,8 @@ static u32 gen6_rps_limits(struct drm_i915_private
*dev_priv, u8 val)
static void gen6_set_rps_thresholds(struct drm_i915_private *dev_priv, u8 val)
{
int new_power;
+ u32 threshold_up = 0, threshold_down = 0; /* in % */
+ u32 ei_up = 0, ei_down = 0;
new_power = dev_priv->rps.power;
switch (dev_priv->rps.power) {
@@ -3709,59 +3711,53 @@ static void gen6_set_rps_thresholds(struct
drm_i915_private *dev_priv, u8 val)
switch (new_power) {
case LOW_POWER:
/* Upclock if more than 95% busy over 16ms */
- I915_WRITE(GEN6_RP_UP_EI, 12500);
- I915_WRITE(GEN6_RP_UP_THRESHOLD, 11800);
+ ei_up = 16000;
+ threshold_up = 95;
/* Downclock if less than 85% busy over 32ms */
- I915_WRITE(GEN6_RP_DOWN_EI, 25000);
- I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 21250);
-
- I915_WRITE(GEN6_RP_CONTROL,
- GEN6_RP_MEDIA_TURBO |
- GEN6_RP_MEDIA_HW_NORMAL_MODE |
- GEN6_RP_MEDIA_IS_GFX |
- GEN6_RP_ENABLE |
- GEN6_RP_UP_BUSY_AVG |
- GEN6_RP_DOWN_IDLE_AVG);
+ ei_down = 32000;
+ threshold_down = 85;
break;
case BETWEEN:
/* Upclock if more than 90% busy over 13ms */
- I915_WRITE(GEN6_RP_UP_EI, 10250);
- I915_WRITE(GEN6_RP_UP_THRESHOLD, 9225);
+ ei_up = 13000;
+ threshold_up = 90;
/* Downclock if less than 75% busy over 32ms */
- I915_WRITE(GEN6_RP_DOWN_EI, 25000);
- I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 18750);
-
- I915_WRITE(GEN6_RP_CONTROL,
- GEN6_RP_MEDIA_TURBO |
- GEN6_RP_MEDIA_HW_NORMAL_MODE |
- GEN6_RP_MEDIA_IS_GFX |
- GEN6_RP_ENABLE |
- GEN6_RP_UP_BUSY_AVG |
- GEN6_RP_DOWN_IDLE_AVG);
+ ei_down = 32000;
+ threshold_down = 75;
break;
case HIGH_POWER:
/* Upclock if more than 85% busy over 10ms */
- I915_WRITE(GEN6_RP_UP_EI, 8000);
- I915_WRITE(GEN6_RP_UP_THRESHOLD, 6800);
+ ei_up = 10000;
+ threshold_up = 85;
/* Downclock if less than 60% busy over 32ms */
- I915_WRITE(GEN6_RP_DOWN_EI, 25000);
- I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 15000);
-
- I915_WRITE(GEN6_RP_CONTROL,
- GEN6_RP_MEDIA_TURBO |
- GEN6_RP_MEDIA_HW_NORMAL_MODE |
- GEN6_RP_MEDIA_IS_GFX |
- GEN6_RP_ENABLE |
- GEN6_RP_UP_BUSY_AVG |
- GEN6_RP_DOWN_IDLE_AVG);
+ ei_down = 32000;
+ threshold_down = 60;
break;
}
+ I915_WRITE(GEN6_RP_UP_EI,
+ GT_INTERVAL_FROM_US(ei_up));
+ I915_WRITE(GEN6_RP_UP_THRESHOLD,
+ GT_INTERVAL_FROM_US((ei_up * threshold_up / 100)));
+
+ I915_WRITE(GEN6_RP_DOWN_EI,
+ GT_INTERVAL_FROM_US(ei_down));
+ I915_WRITE(GEN6_RP_DOWN_THRESHOLD,
+ GT_INTERVAL_FROM_US((ei_down * threshold_down / 100)));
+
+ I915_WRITE(GEN6_RP_CONTROL,
+ GEN6_RP_MEDIA_TURBO |
+ GEN6_RP_MEDIA_HW_NORMAL_MODE |
+ GEN6_RP_MEDIA_IS_GFX |
+ GEN6_RP_ENABLE |
+ GEN6_RP_UP_BUSY_AVG |
+ GEN6_RP_DOWN_IDLE_AVG);
+
dev_priv->rps.power = new_power;
dev_priv->rps.last_adj = 0;
}
--
1.9.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
