On some Intel SoC platforms, the panel enable/disable signals are
controlled by CRC PMIC. Add those control as a new GPIO in a lookup
table for gpio-crystalcove chip during CRC driver load
CC: Samuel Ortiz <sa...@linux.intel.com>
Cc: Linus Walleij <linus.wall...@linaro.org>
Cc: Alexandre Courbot <gnu...@gmail.com>
Cc: Thierry Reding <thierry.red...@gmail.com>
Signed-off-by: Shobhit Kumar <shobhit.ku...@intel.com>
---
drivers/mfd/intel_soc_pmic_core.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/mfd/intel_soc_pmic_core.c
b/drivers/mfd/intel_soc_pmic_core.c
index 80cef04..365d5de 100644
--- a/drivers/mfd/intel_soc_pmic_core.c
+++ b/drivers/mfd/intel_soc_pmic_core.c
@@ -24,8 +24,19 @@
#include <linux/acpi.h>
#include <linux/regmap.h>
#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/gpio/machine.h>
#include "intel_soc_pmic_core.h"
+/* Lookup table for the Panel Enable/Disable line as GPIO signals */
+struct gpiod_lookup_table panel_gpio_table = {
+ /* Intel GFX is consumer */
+ .dev_id = "0000:00:02.0",
+ .table = {
+ /* Panel EN/DISABLE */
+ GPIO_LOOKUP("gpio_crystalcove", 94, "panel", GPIO_ACTIVE_HIGH),
+ },
+};
+
/*
* On some boards the PMIC interrupt may come from a GPIO line.
* Try to lookup the ACPI table and see if such connection exists. If not,
@@ -85,6 +96,9 @@ static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c,
if (ret)
dev_warn(dev, "Can't enable IRQ as wake source: %d\n", ret);
+ /* Add lookup table binding for Panel Control to the GPIO Chip */
+ gpiod_add_lookup_table(&panel_gpio_table);
+
ret = mfd_add_devices(dev, -1, config->cell_dev,
config->n_cell_devs, NULL, 0,
regmap_irq_get_domain(pmic->irq_chip_data));
--
2.1.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
