> -----Original Message----- > From: Intel-wired-lan <[email protected]> On Behalf Of > [email protected] > Sent: 23 July 2026 19:34 > To: [email protected] > Cc: [email protected]; [email protected]; [email protected]; > [email protected]; [email protected]; [email protected]; [email protected]; > Nguyen, Anthony L <[email protected]>; Kitszel, Przemyslaw > <[email protected]>; [email protected]; [email protected]; > Mohammad Heib <[email protected]> > Subject: [Intel-wired-lan] [PATCH iwl-next v4 1/3] i40e: move ATR sample rate > from ring to PF level > > From: Mohammad Heib <[email protected]> > > The ATR sample rate is currently stored per-ring and initialized when each TX > ring is configured. Since the sample rate is a global policy that applies > uniformly across all rings, it makes more sense to store it at the PF level. > > Move atr_sample_rate from struct i40e_ring to struct i40e_pf and initialize > it once during i40e_sw_init(). Update i40e_atr() to reference the PF-level > field. Change atr_count from u8 to u32 to match the sample rate type. > > Signed-off-by: Mohammad Heib <[email protected]> > --- > drivers/net/ethernet/intel/i40e/i40e.h | 1 + > drivers/net/ethernet/intel/i40e/i40e_main.c | 9 +++------ > drivers/net/ethernet/intel/i40e/i40e_txrx.c | 6 ++++-- > drivers/net/ethernet/intel/i40e/i40e_txrx.h | 3 +-- > 4 files changed, 9 insertions(+), 10 deletions(-) >
Tested-by: Rinitha S <[email protected]> (A Contingent worker at Intel)
